About Tapping Screws
More
About Flat Head Screws
More
18-8 Stainless Steel Torx Flat Head Screws
These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. All are passivated for added protection against oxidation and corrosion. A Torx-Plus drive has more points of contact than other drives, allowing you to tighten the screw without damaging the recess. For Torx tools, see Torx and Torx-Plus bits, keys, and drivers. These screws can be used with both Torx-Plus and Torx tools. Screws are angled under the head to sit flush within countersunk holes. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
| Lg. | Threading | Head Dia. | Head Ht. | Drive Size | Tensile Strength, psi  | Specifications Met | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
0-80 | |||||||||
| 1/8" | Fully Threaded | 0.138" | 0.044" | IP3, T3 | 60,000 | ASME B18.3 | 100 | 000000000 | 00000 |
| 3/16" | Fully Threaded | 0.138" | 0.044" | IP3, T3 | 60,000 | ASME B18.3 | 100 | 000000000 | 0000 |
| 1/4" | Fully Threaded | 0.138" | 0.044" | IP3, T3 | 60,000 | ASME B18.3 | 100 | 000000000 | 0000 |
Stainless Steel Torx Rounded Head Thread-Forming Screws for Plastic
These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. A Torx or Torx Plus drive provides more points of contact than a Phillips drive, allowing you to apply extra force with less slippage or damage to the recess. Comparable to Plastite screws, these screws have a triangular shank that presses tightly against formable plastic such as polypropylene to resist loosening. They may have a slightly different diameter than standard screws. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head | Drive | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Size | Style | Drill Bit Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
No. 00 | |||||||||
| 3/32" | 0.09" | 0.038" | IP3, T3 | Torx Plus | No. 59 | 51 | 25 | 000000000 | 000000 |
| 1/8" | 0.09" | 0.038" | IP3, T3 | Torx Plus | No. 59 | 51 | 25 | 000000000 | 00000 |
| 3/16" | 0.09" | 0.038" | IP3, T3 | Torx Plus | No. 59 | 51 | 25 | 000000000 | 00000 |
| 1/4" | 0.09" | 0.038" | IP3, T3 | Torx Plus | No. 59 | 51 | 25 | 000000000 | 00000 |
Stainless Steel Flat Head Thread-Forming Screws for Plastic
18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. They are beveled under the head for use in countersunk holes. Length is measured from the top of the head.
Comparable to Plastite screws, inch-size screws have a triangular shank that presses tightly against formable plastic, such as polypropylene, to resist loosening. They may have a slightly different diameter than screws with round shanks.
Screws with a Torx or Torx Plus drive allow you to apply extra force with less slippage or damage to the recess.
For technical drawings and 3-D models, click on a part number.
Steel Flat Head Thread-Forming Screws for Plastic
These steel screws are beveled under the head for use in countersunk holes. Length is measured from the top of the head.
Inch-size screws are comparable to Plastite screws. They have a tri-lobe shank that presses tightly against formable plastic, such as polypropylene, to resist loosening. These screws may have a slightly different diameter than screws with round shanks. Those with a Torx Plus drive allow you to apply extra force with less slippage or damage to the recess.
Zinc-plated steel screws resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Steel Thread-Forming Screws for Thin Plastic
These steel screws are zinc plated to resist corrosion in wet environments. They have a round shank and more sharply angled threads than other thread-forming screws, so they require less driving torque and reduce the risk of cracking thin plastic. A Torx drive allows you to apply extra force with less slippage or damage to the recess. Length is measured from under the head.
Style A screws are also known as Delta PT® screws.
For technical drawings and 3-D models, click on a part number.
Head, mm | Drive | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg., mm | Dia. | Ht. | Size | Style | Drill Bit Size | Approximate Thread Pitch, mm | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||
M1.2 | |||||||||
| 2 | 2.175 | 0.95 | IP3, T3 | Torx Plus | No. 62 | 0.51 | 25 | 000000000 | 000000 |
| 3 | 2.175 | 0.95 | IP3, T3 | Torx Plus | No. 62 | 0.51 | 25 | 000000000 | 00000 |
| 4 | 2.175 | 0.95 | IP3, T3 | Torx Plus | No. 62 | 0.51 | 25 | 000000000 | 00000 |
| 5 | 2.175 | 0.95 | IP3, T3 | Torx Plus | No. 62 | 0.51 | 25 | 000000000 | 00000 |
M1.4 | |||||||||
| 3 | 2.35 | 1.15 | IP3, T3 | Torx Plus | No. 56 | 0.57 | 25 | 000000000 | 0000 |
| 4 | 2.35 | 1.15 | IP3, T3 | Torx Plus | No. 56 | 0.57 | 25 | 000000000 | 0000 |
| 5 | 2.35 | 1.15 | IP3, T3 | Torx Plus | No. 56 | 0.57 | 25 | 000000000 | 0000 |
| 6 | 2.35 | 1.15 | IP3, T3 | Torx Plus | No. 56 | 0.57 | 25 | 000000000 | 0000 |
Stainless Steel Thread-Forming Screws for Thin Plastic
18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. They have a round shank and more sharply angled threads than other thread-forming screws, so they require less driving torque and reduce the risk of cracking thin plastic. A Torx drive allows you to apply extra force with less slippage or damage to the recess.
Pan head screws are also known as Delta PT® screws. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head, mm | Drive | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg., mm | Dia. | Ht. | Size | Style | Drill Bit Size | Approximate Thread Pitch, mm | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
M1.2 | |||||||||
| 2 | 2.175 | 0.95 | IP3, T3 | Torx Plus | No. 62 | 0.51 | 25 | 000000000 | 000000 |
| 3 | 2.175 | 0.95 | IP3, T3 | Torx Plus | No. 62 | 0.51 | 25 | 000000000 | 00000 |
| 4 | 2.175 | 0.95 | IP3, T3 | Torx Plus | No. 62 | 0.51 | 25 | 000000000 | 00000 |
| 5 | 2.175 | 0.95 | IP3, T3 | Torx Plus | No. 62 | 0.51 | 25 | 000000000 | 00000 |
M1.4 | |||||||||
| 3 | 2.35 | 1.15 | IP3, T3 | Torx Plus | No. 56 | 0.57 | 25 | 000000000 | 00000 |
| 4 | 2.35 | 1.15 | IP3, T3 | Torx Plus | No. 56 | 0.57 | 25 | 000000000 | 00000 |
| 5 | 2.35 | 1.15 | IP3, T3 | Torx Plus | No. 56 | 0.57 | 25 | 000000000 | 00000 |
| 6 | 2.35 | 1.15 | IP3, T3 | Torx Plus | No. 56 | 0.57 | 25 | 000000000 | 00000 |