Filter by
Material
Length
Head Diameter
Threading
Head Height
Socket Head Profile
Thread Fit
Thread Direction
Specifications Met
Performance
Tensile Strength
DFARS Specialty Metals
Tip Type
Export Control Classification Number (ECCN)
Sold As
Titanium Socket Head Screws
 |  |
Fully Threaded | Partially Threaded |
Lightweight like aluminum, more corrosion resistant than stainless steel. The deep, six-point socket keeps hex keys from slipping out and damaging the drive on these screws.
Length is measured from under the head.
Lightweight Ultra-Corrosion-Resistant Grade 2 Titanium—Often used in chemical-processing and water-treatment plants, these stand up to strong acids and other harsh chemicals.
Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Threading | Thread Spacing | Tensile Strength, psi | Each | |||
Lightweight Ultra-Corrosion-Resistant Grade 2 Titanium | |||||||||
0-80 | |||||||||
| 1/8" | 0.096" | 0.06" | Fully Threaded | Fine | 50,000 | 95435A101 | 00000 | ||
| 3/16" | 0.096" | 0.06" | Fully Threaded | Fine | 50,000 | 95435A102 | 0000 | ||
| 1/4" | 0.096" | 0.06" | Fully Threaded | Fine | 50,000 | 95435A103 | 0000 | ||
| 3/8" | 0.096" | 0.06" | Fully Threaded | Fine | 50,000 | 95435A104 | 0000 | ||
2-56 | |||||||||
| 1/8" | 0.14" | 0.086" | Fully Threaded | Coarse | 50,000 | 95435A201 | 0000 | ||
| 3/16" | 0.14" | 0.086" | Fully Threaded | Coarse | 50,000 | 95435A207 | 0000 | ||
| 1/4" | 0.14" | 0.086" | Fully Threaded | Coarse | 50,000 | 95435A213 | 0000 | ||
| 5/16" | 0.14" | 0.086" | Fully Threaded | Coarse | 50,000 | 95435A209 | 0000 | ||
| 3/8" | 0.14" | 0.086" | Fully Threaded | Coarse | 50,000 | 95435A219 | 0000 | ||
| 1/2" | 0.14" | 0.086" | Fully Threaded | Coarse | 50,000 | 95435A225 | 0000 | ||
4-40 | |||||||||
| 3/16" | 0.183" | 0.112" | Fully Threaded | Coarse | 50,000 | 95435A332 | 00000 | ||
| 1/4" | 0.183" | 0.112" | Fully Threaded | Coarse | 50,000 | 95435A338 | 00000 | ||
| 5/16" | 0.183" | 0.112" | Fully Threaded | Coarse | 50,000 | 95435A344 | 00000 | ||
| 3/8" | 0.183" | 0.112" | Fully Threaded | Coarse | 50,000 | 95435A350 | 00000 | ||
| 1/2" | 0.183" | 0.112" | Fully Threaded | Coarse | 50,000 | 95435A356 | 00000 | ||
| 5/8" | 0.183" | 0.112" | Fully Threaded | Coarse | 50,000 | 95435A362 | 00000 | ||
| 3/4" | 0.183" | 0.112" | Fully Threaded | Coarse | 50,000 | 95435A364 | 00000 | ||
| 1" | 0.183" | 0.112" | Partially Threaded | Coarse | 50,000 | 95435A365 | 00000 | ||
6-32 | |||||||||
| 1/4" | 0.226" | 0.138" | Fully Threaded | Coarse | 50,000 | 95435A473 | 00000 | ||
| 5/16" | 0.226" | 0.138" | Fully Threaded | Coarse | 50,000 | 95435A481 | 00000 | ||
| 3/8" | 0.226" | 0.138" | Fully Threaded | Coarse | 50,000 | 95435A479 | 00000 | ||
| 1/2" | 0.226" | 0.138" | Fully Threaded | Coarse | 50,000 | 95435A485 | 00000 | ||
| 5/8" | 0.226" | 0.138" | Fully Threaded | Coarse | 50,000 | 95435A490 | 00000 | ||
| 3/4" | 0.226" | 0.138" | Fully Threaded | Coarse | 50,000 | 95435A495 | 00000 | ||
| 1" | 0.226" | 0.138" | Fully Threaded | Coarse | 50,000 | 95435A499 | 00000 | ||
8-32 | |||||||||
| 1/4" | 0.27" | 0.164" | Fully Threaded | Coarse | 50,000 | 95435A554 | 00000 | ||
| 3/8" | 0.27" | 0.164" | Fully Threaded | Coarse | 50,000 | 95435A561 | 00000 | ||
| 1/2" | 0.27" | 0.164" | Fully Threaded | Coarse | 50,000 | 95435A568 | 00000 | ||
| 5/8" | 0.27" | 0.164" | Fully Threaded | Coarse | 50,000 | 95435A575 | 00000 | ||
| 3/4" | 0.27" | 0.164" | Fully Threaded | Coarse | 50,000 | 95435A582 | 00000 | ||
| 1" | 0.27" | 0.164" | Fully Threaded | Coarse | 50,000 | 95435A589 | 00000 | ||
| 1 1/4" | 0.27" | 0.164" | Fully Threaded | Coarse | 50,000 | 95435A596 | 00000 | ||
10-32 | |||||||||
| 1/4" | 5/16" | 0.19" | Fully Threaded | Fine | 50,000 | 95435A617 | 00000 | ||
| 3/8" | 5/16" | 0.19" | Fully Threaded | Fine | 50,000 | 95435A615 | 00000 | ||
| 1/2" | 5/16" | 0.19" | Fully Threaded | Fine | 50,000 | 95435A621 | 00000 | ||
| 5/8" | 5/16" | 0.19" | Fully Threaded | Fine | 50,000 | 95435A627 | 00000 | ||
| 3/4" | 5/16" | 0.19" | Fully Threaded | Fine | 50,000 | 95435A633 | 00000 | ||
| 1" | 5/16" | 0.19" | Fully Threaded | Fine | 50,000 | 95435A639 | 00000 | ||
| 1 1/4" | 5/16" | 0.19" | Partially Threaded | Fine | 50,000 | 95435A645 | 00000 | ||
| 1 1/2" | 5/16" | 0.19" | Partially Threaded | Fine | 50,000 | 95435A651 | 00000 | ||
1/4"-20 | |||||||||
| 1/4" | 3/8" | 1/4" | Fully Threaded | Coarse | 50,000 | 95435A735 | 00000 | ||
| 3/8" | 3/8" | 1/4" | Fully Threaded | Coarse | 50,000 | 95435A737 | 00000 | ||
| 1/2" | 3/8" | 1/4" | Fully Threaded | Coarse | 50,000 | 95435A743 | 00000 | ||
| 5/8" | 3/8" | 1/4" | Fully Threaded | Coarse | 50,000 | 95435A749 | 00000 | ||
| 3/4" | 3/8" | 1/4" | Fully Threaded | Coarse | 50,000 | 95435A755 | 00000 | ||
| 7/8" | 3/8" | 1/4" | Fully Threaded | Coarse | 50,000 | 95435A757 | 00000 | ||
| 1" | 3/8" | 1/4" | Fully Threaded | Coarse | 50,000 | 95435A761 | 00000 | ||
| 1 1/8" | 3/8" | 1/4" | Fully Threaded | Coarse | 50,000 | 95435A765 | 00000 | ||
| 1 1/4" | 3/8" | 1/4" | Partially Threaded | Coarse | 50,000 | 95435A767 | 00000 | ||
| 1 1/2" | 3/8" | 1/4" | Partially Threaded | Coarse | 50,000 | 95435A773 | 00000 | ||
| 2" | 3/8" | 1/4" | Partially Threaded | Coarse | 50,000 | 95435A775 | 00000 | ||
5/16"-18 | |||||||||
| 1/2" | 15/32" | 5/16" | Fully Threaded | Coarse | 50,000 | 95435A814 | 00000 | ||
| 5/8" | 15/32" | 5/16" | Fully Threaded | Coarse | 50,000 | 95435A816 | 00000 | ||
| 3/4" | 15/32" | 5/16" | Fully Threaded | Coarse | 50,000 | 95435A818 | 00000 | ||
| 7/8" | 15/32" | 5/16" | Fully Threaded | Coarse | 50,000 | 95435A821 | 00000 | ||
| 1" | 15/32" | 5/16" | Fully Threaded | Coarse | 50,000 | 95435A823 | 00000 | ||
| 1 1/4" | 15/32" | 5/16" | Fully Threaded | Coarse | 50,000 | 95435A826 | 00000 | ||
| 1 1/2" | 15/32" | 5/16" | Partially Threaded | Coarse | 50,000 | 95435A828 | 00000 | ||
| 2" | 15/32" | 5/16" | Partially Threaded | Coarse | 50,000 | 95435A832 | 00000 | ||
3/8"-16 | |||||||||
| 3/4" | 9/16" | 3/8" | Fully Threaded | Coarse | 50,000 | 95435A918 | 00000 | ||
| 7/8" | 9/16" | 3/8" | Fully Threaded | Coarse | 50,000 | 95435A921 | 00000 | ||
| 1" | 9/16" | 3/8" | Fully Threaded | Coarse | 50,000 | 95435A923 | 00000 | ||
| 1 1/4" | 9/16" | 3/8" | Fully Threaded | Coarse | 50,000 | 95435A926 | 00000 | ||
| 1 1/2" | 9/16" | 3/8" | Fully Threaded | Coarse | 50,000 | 95435A928 | 00000 | ||
1/2"-13 | |||||||||
| 1" | 3/4" | 1/2" | Fully Threaded | Coarse | 50,000 | 95435A951 | 00000 | ||
| 1 1/4" | 3/4" | 1/2" | Fully Threaded | Coarse | 50,000 | 95435A953 | 00000 | ||
| 1 1/2" | 3/4" | 1/2" | Fully Threaded | Coarse | 50,000 | 95435A955 | 00000 | ||
| 2" | 3/4" | 1/2" | Fully Threaded | Coarse | 50,000 | 95435A958 | 00000 | ||
| 3" | 3/4" | 1/2" | Fully Threaded | Coarse | 50,000 | 95435A965 | 00000 | ||
M3 × 0.5 mm | |||||||||
| 10 mm | 5.7 mm | 2.9 mm | Fully Threaded | Coarse | 50,000 | 95435A971 | 0000 | ||
| 20 mm | 5.7 mm | 2.9 mm | Fully Threaded | Coarse | 50,000 | 95435A972 | 0000 | ||
| 30 mm | 5.7 mm | 2.9 mm | Fully Threaded | Coarse | 50,000 | 95435A973 | 0000 | ||
M4 × 0.7 mm | |||||||||
| 10 mm | 7.2 mm | 3.9 mm | Fully Threaded | Coarse | 50,000 | 95435A974 | 0000 | ||
| 20 mm | 7.2 mm | 3.9 mm | Fully Threaded | Coarse | 50,000 | 95435A975 | 0000 | ||
| 30 mm | 7.2 mm | 3.9 mm | Fully Threaded | Coarse | 50,000 | 95435A976 | 0000 | ||
M5 × 0.8 mm | |||||||||
| 10 mm | 8.7 mm | 4.9 mm | Fully Threaded | Coarse | 50,000 | 95435A977 | 0000 | ||
| 20 mm | 8.7 mm | 4.9 mm | Fully Threaded | Coarse | 50,000 | 95435A978 | 0000 | ||
| 30 mm | 8.7 mm | 4.9 mm | Fully Threaded | Coarse | 50,000 | 95435A979 | 0000 | ||
M6 × 1 mm | |||||||||
| 10 mm | 10 mm | 5.9 mm | Fully Threaded | Coarse | 50,000 | 95435A981 | 0000 | ||
| 16 mm | 10 mm | 5.9 mm | Fully Threaded | Coarse | 50,000 | 95435A982 | 0000 | ||
| 20 mm | 10 mm | 5.9 mm | Fully Threaded | Coarse | 50,000 | 95435A983 | 0000 | ||
| 40 mm | 10 mm | 5.9 mm | Fully Threaded | Coarse | 50,000 | 95435A984 | 0000 | ||
Titanium Phillips Flat Head Screws
 |
The best of both worlds, these titanium screws are lightweight like aluminum and resist corrosion better than stainless steel. They have a Phillips drive with a cross-shaped opening in which a driver fits snugly for easy alignment. With four contact points, they withstand more torque than slotted drives, but drivers slip when you apply too much force.
Length is measured from the top of the head.
Lightweight Ultra-Corrosion-Resistant Grade 2 Titanium—These screws stand up to strong acids and other harsh chemicals. They're often used in chemical-processing and water-treatment facilities.
Standard Profile—Standard-profile heads are the most common choice for flat head screws.
Head | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Countersink Angle | Flat Head Profile | Dia. | Ht. | Threading | Tensile Strength, psi | Specs. Met | Pkg. Qty. | Pkg. | |||
Lightweight Ultra-Corrosion-Resistant Grade 2 Titanium | ||||||||||||
4-40 | ||||||||||||
| 1/4" | 82° | Standard | 0.212" | 0.067" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A400 | 00000 | ||
| 3/8" | 82° | Standard | 0.212" | 0.067" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A405 | 0000 | ||
| 1/2" | 82° | Standard | 0.212" | 0.067" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A410 | 0000 | ||
6-32 | ||||||||||||
| 1/4" | 82° | Standard | 0.262" | 0.083" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A541 | 0000 | ||
| 3/8" | 82° | Standard | 0.262" | 0.083" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A546 | 0000 | ||
| 1/2" | 82° | Standard | 0.262" | 0.083" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A548 | 0000 | ||
| 3/4" | 82° | Standard | 0.262" | 0.083" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A551 | 0000 | ||
8-32 | ||||||||||||
| 3/8" | 82° | Standard | 0.312" | 0.1" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A592 | 0000 | ||
| 1/2" | 82° | Standard | 0.312" | 0.1" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A594 | 0000 | ||
| 1" | 82° | Standard | 0.312" | 0.1" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A599 | 0000 | ||
10-24 | ||||||||||||
| 1/2" | 82° | Standard | 0.362" | 0.116" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A815 | 0000 | ||
| 3/4" | 82° | Standard | 0.362" | 0.116" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A820 | 0000 | ||
| 1" | 82° | Standard | 0.362" | 0.116" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A825 | 0000 | ||
| 1 1/2" | 82° | Standard | 0.362" | 0.116" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A835 | 0000 | ||
1/4"-20 | ||||||||||||
| 1/2" | 82° | Standard | 0.477" | 0.153" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A910 | 0000 | ||
| 3/4" | 82° | Standard | 0.477" | 0.153" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A915 | 0000 | ||
| 1" | 82° | Standard | 0.477" | 0.153" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A920 | 0000 | ||
| 1 1/2" | 82° | Standard | 0.477" | 0.153" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A930 | 0000 | ||
| 2" | 82° | Standard | 0.477" | 0.153" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90233A935 | 0000 | ||
M3 × 0.5 mm | ||||||||||||
| 5 mm | 90° | Standard | 6.02 mm | 2.1 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A001 | 0000 | ||
| 6 mm | 90° | Standard | 6.02 mm | 2.1 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A002 | 0000 | ||
| 8 mm | 90° | Standard | 6.02 mm | 2.1 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A003 | 0000 | ||
| 10 mm | 90° | Standard | 6.02 mm | 2.1 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A004 | 0000 | ||
| 12 mm | 90° | Standard | 6.02 mm | 2.1 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A005 | 0000 | ||
M4 × 0.7 mm | ||||||||||||
| 6 mm | 90° | Standard | 9.03 mm | 2.6 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A006 | 0000 | ||
| 8 mm | 90° | Standard | 9.03 mm | 2.6 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A007 | 0000 | ||
| 10 mm | 90° | Standard | 9.03 mm | 2.6 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A008 | 00000 | ||
| 12 mm | 90° | Standard | 9.03 mm | 2.6 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A009 | 00000 | ||
| 16 mm | 90° | Standard | 9.03 mm | 2.6 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A010 | 00000 | ||
M5 × 0.8 mm | ||||||||||||
| 8 mm | 90° | Standard | 9.95 mm | 3.2 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A011 | 00000 | ||
| 10 mm | 90° | Standard | 9.95 mm | 3.2 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A012 | 00000 | ||
| 12 mm | 90° | Standard | 9.95 mm | 3.2 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A013 | 00000 | ||
| 16 mm | 90° | Standard | 9.95 mm | 3.2 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A014 | 00000 | ||
| 20 mm | 90° | Standard | 9.95 mm | 3.2 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A015 | 00000 | ||
M6 × 1 mm | ||||||||||||
| 12 mm | 90° | Standard | 12.06 mm | 3.5 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A016 | 00000 | ||
| 16 mm | 90° | Standard | 12.06 mm | 3.5 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A017 | 00000 | ||
| 20 mm | 90° | Standard | 12.06 mm | 3.5 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A018 | 00000 | ||
| 25 mm | 90° | Standard | 12.06 mm | 3.5 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A019 | 00000 | ||
| 30 mm | 90° | Standard | 12.06 mm | 3.5 mm | Fully Threaded | 40,000 | ISO 7046-2 | 5 | 91307A021 | 00000 | ||
Titanium Pan Head Phillips Screws
 |
The best of both worlds, these Grade 2 titanium screws are lightweight like aluminum and more corrosion resistant than stainless steel. They stand up to salt water, strong acids, and harsh chemicals, so they're often used in chemical-processing and water-treatment facilities. Pan heads have a moderate height and width profile, offering a middle ground between narrower button heads and wider truss heads. The Phillips drive easily aligns with drivers and withstands more torque than slotted drives, but drivers slip when you apply too much force.
Length is measured from under the head.
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Threading | Tensile Strength, psi | Specs. Met | Pkg. Qty. | Pkg. | |||
Lightweight Ultra-Corrosion-Resistant Grade 2 Titanium | ||||||||||
4-40 | ||||||||||
| 3/16" | 0.219" | 0.075" | Fully Threaded | 40,000 | ASME B18.6.3 | 5 | 90234A165 | 000000 | ||
| 1/4" | 0.219" | 0.08" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A170 | 0000 | ||
| 3/8" | 0.219" | 0.08" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A175 | 0000 | ||
| 1/2" | 0.219" | 0.08" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A180 | 0000 | ||
6-32 | ||||||||||
| 1/4" | 0.27" | 0.097" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A200 | 0000 | ||
| 3/8" | 0.27" | 0.097" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A205 | 0000 | ||
| 1/2" | 0.27" | 0.097" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A210 | 0000 | ||
| 3/4" | 0.27" | 0.097" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A215 | 0000 | ||
8-32 | ||||||||||
| 1/4" | 0.322" | 0.11" | Fully Threaded | 40,000 | ASME B18.6.3 | 5 | 90234A290 | 00000 | ||
| 3/8" | 0.322" | 0.11" | Fully Threaded | 40,000 | ASME B18.6.3 | 5 | 90234A292 | 00000 | ||
| 1/2" | 0.322" | 0.115" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A294 | 0000 | ||
| 3/4" | 0.322" | 0.11" | Fully Threaded | 40,000 | ASME B18.6.3 | 5 | 90234A296 | 00000 | ||
| 1" | 0.322" | 0.115" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A299 | 0000 | ||
| 1 1/2" | 0.322" | 0.115" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A300 | 0000 | ||
10-24 | ||||||||||
| 1" | 0.373" | 0.133" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A425 | 0000 | ||
| 1 1/2" | 0.373" | 0.133" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A426 | 0000 | ||
10-32 | ||||||||||
| 3/8" | 0.373" | 0.128" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A440 | 0000 | ||
| 1/2" | 0.373" | 0.128" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A442 | 0000 | ||
| 3/4" | 0.373" | 0.128" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A444 | 0000 | ||
| 1" | 0.373" | 0.128" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A446 | 0000 | ||
1/4"-20 | ||||||||||
| 1/2" | 0.492" | 0.175" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A910 | 0000 | ||
| 3/4" | 0.492" | 0.175" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A915 | 0000 | ||
| 1" | 0.492" | 0.175" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A920 | 0000 | ||
| 1 1/2" | 0.492" | 0.175" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A930 | 0000 | ||
| 2" | 0.492" | 0.175" | Fully Threaded | 40,000 | ASME B18.6.3 | 1 | 90234A935 | 00000 | ||
M3 × 0.5 mm | ||||||||||
| 5 mm | 5.6 mm | 2.33 mm | Fully Threaded | 40,000 | ISO 7045 | 10 | 90234A304 | 00000 | ||
| 6 mm | 5.6 mm | 2.33 mm | Fully Threaded | 40,000 | ISO 7045 | 10 | 90234A305 | 00000 | ||
| 8 mm | 5.6 mm | 2.33 mm | Fully Threaded | 40,000 | ISO 7045 | 10 | 90234A306 | 00000 | ||
| 10 mm | 5.6 mm | 2.33 mm | Fully Threaded | 40,000 | ISO 7045 | 10 | 90234A307 | 00000 | ||
| 12 mm | 5.6 mm | 2.33 mm | Fully Threaded | 40,000 | ISO 7045 | 10 | 90234A308 | 00000 | ||
M4 × 0.7 mm | ||||||||||
| 6 mm | 8 mm | 3.01 mm | Fully Threaded | 40,000 | ISO 7045 | 10 | 90234A322 | 00000 | ||
| 8 mm | 8 mm | 3.01 mm | Fully Threaded | 40,000 | ISO 7045 | 10 | 90234A323 | 00000 | ||
| 10 mm | 8 mm | 3.01 mm | Fully Threaded | 40,000 | ISO 7045 | 10 | 90234A324 | 00000 | ||
| 12 mm | 8 mm | 3.01 mm | Fully Threaded | 40,000 | ISO 7045 | 10 | 90234A325 | 00000 | ||
| 16 mm | 8 mm | 3.01 mm | Fully Threaded | 40,000 | ISO 7045 | 10 | 90234A327 | 00000 | ||
M5 × 0.8 mm | ||||||||||
| 8 mm | 9.5 mm | 3.61 mm | Fully Threaded | 40,000 | ISO 7045 | 10 | 90234A342 | 00000 | ||
| 10 mm | 9.5 mm | 3.61 mm | Fully Threaded | 40,000 | ISO 7045 | 10 | 90234A343 | 00000 | ||
| 12 mm | 9.5 mm | 3.61 mm | Fully Threaded | 40,000 | ISO 7045 | 10 | 90234A344 | 00000 | ||
| 16 mm | 9.5 mm | 3.61 mm | Fully Threaded | 40,000 | ISO 7045 | 5 | 90234A346 | 0000 | ||
| 20 mm | 9.5 mm | 3.61 mm | Fully Threaded | 40,000 | ISO 7045 | 5 | 90234A348 | 00000 | ||
M6 × 1 mm | ||||||||||
| 10 mm | 12 mm | 4.45 mm | Fully Threaded | 40,000 | ISO 7045 | 5 | 90234A362 | 00000 | ||
| 12 mm | 12 mm | 4.45 mm | Fully Threaded | 40,000 | ISO 7045 | 5 | 90234A363 | 00000 | ||
| 16 mm | 12 mm | 4.45 mm | Fully Threaded | 40,000 | ISO 7045 | 5 | 90234A365 | 00000 | ||
| 20 mm | 12 mm | 4.45 mm | Fully Threaded | 40,000 | ISO 7045 | 5 | 90234A367 | 00000 | ||
| 25 mm | 12 mm | 4.45 mm | Fully Threaded | 40,000 | ISO 7045 | 5 | 90234A369 | 00000 | ||
Twist-Resistant Rivet Nuts
 |
 |
Ideal for parts that require frequent maintenance or disassembly, these rivet nuts won't spin out when you tighten or loosen a screw. Their ribbed body digs into material to prevent twisting.
Install these nuts in a drilled or punched round hole using a rivet nut tool. Thread the rivet nut onto the mandrel, then grip the tool body with a wrench as you twist the tightening nut with a ratchet. Choose an air- or battery-powered tool for fast installation or to easily switch between many different nut sizes. Length is measured from under the flange.
Ultra-Corrosion-Resistant Lightweight Grade 2 Titanium—Originally designed for Formula 1 race cars, these rivet nuts are 40% lighter than steel nuts yet strong enough for the highest stress applications. They resist everything from salt water to harsh acids.
Rivet Nuts | Wrench-Driven Tools | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flange | |||||||||||||
Thread Size | Drill Bit Size | For Material Thk. | Body Dia. | Lg. | Installed Lg. | Dia. | Thk. | Each | Each | ||||
Ultra-Corrosion-Resistant Lightweight Grade 2 Titanium | |||||||||||||
| 10-32 | 19/64" | 0.039" to 0.098" | 0.276" | 0.492" | 0.276" | 0.394" | 0.039" | 90597A140 | 00000 | 96349A203 | 000000 | ||
| 1/4"-20 | 25/64" | 0.020" to 0.118" | 0.354" | 0.63" | 0.374" | 0.472" | 0.047" | 90597A150 | 00000 | 96349A305 | 00000 | ||
| M5 x 0.8 mm | 7 mm | 1 mm to 2.5 mm | 7 mm | 12.5 mm | 7 mm | 10 mm | 1 mm | 90597A110 | 0000 | 96349A713 | 00000 | ||
| M6 x 1 mm | 9 mm | 0.5 mm to 3 mm | 9 mm | 16 mm | 9.5 mm | 12 mm | 1.2 mm | 90597A120 | 00000 | 96349A764 | 00000 | ||
| M8 x 1.25 mm | 11 mm | 1 mm to 3 mm | 11 mm | 17 mm | 9.5 mm | 14 mm | 1.3 mm | 90597A130 | 00000 | 96349A815 | 00000 | ||
Titanium Hex-Drive Shoulder Screws
 |
The best of both worlds, these titanium screws are lightweight like aluminum and corrosion resistant like 316 stainless steel.
Lightweight Ultra-Corrosion-Resistant Grade 2 Titanium—Stand up to strong acids and other harsh chemicals in environments such as chemical processing and water-treatment facilities.
Head | Certificate | Each | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shoulder Lg. | Thread Size | Thread Lg. | Dia. | Ht. | Drive Size | Tensile Strength, psi | Specs. Met | Type | Form | 1-4 | 5-Up | |||
Lightweight Ultra-Corrosion-Resistant Grade 2 Titanium | ||||||||||||||
1/8" Diameter Shoulder (-0.004" to -0.002" Tolerance) | ||||||||||||||
| 1/8" | 4-40 | 5/32" | 1/4" | 1/8" | 5/64" | 40,000 | — | — | — | 98256A101 | 000000 | 000000 | ||
| 3/16" | 4-40 | 5/32" | 1/4" | 1/8" | 5/64" | 40,000 | — | — | — | 98256A102 | 00000 | 00000 | ||
| 1/4" | 4-40 | 5/32" | 1/4" | 1/8" | 5/64" | 40,000 | — | — | — | 98256A103 | 00000 | 00000 | ||
| 5/16" | 4-40 | 5/32" | 1/4" | 1/8" | 5/64" | 40,000 | — | — | — | 98256A104 | 00000 | 00000 | ||
| 3/8" | 4-40 | 5/32" | 1/4" | 1/8" | 5/64" | 40,000 | — | — | — | 98256A105 | 00000 | 00000 | ||
| 1/2" | 4-40 | 5/32" | 1/4" | 1/8" | 5/64" | 40,000 | — | — | — | 98256A106 | 00000 | 00000 | ||
3/16" Diameter Shoulder (-0.004" to -0.002" Tolerance) | ||||||||||||||
| 1/8" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 40,000 | — | — | — | 98256A201 | 00000 | 00000 | ||
| 3/16" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 40,000 | — | — | — | 98256A202 | 00000 | 00000 | ||
| 1/4" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 40,000 | — | — | — | 98256A203 | 00000 | 00000 | ||
| 5/16" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 40,000 | — | Material Certificate | Digital | 98256A204 | 00000 | 00000 | ||
| 3/8" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 40,000 | — | — | — | 98256A205 | 00000 | 00000 | ||
| 1/2" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 40,000 | — | — | — | 98256A206 | 00000 | 00000 | ||
| 3/4" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 40,000 | — | — | — | 98256A207 | 00000 | 00000 | ||
| 1" | 8-32 | 3/16" | 5/16" | 5/32" | 3/32" | 40,000 | — | — | — | 98256A208 | 00000 | 00000 | ||
1/4" Diameter Shoulder (-0.004" to -0.002" Tolerance) | ||||||||||||||
| 1/4" | 10-24 | 3/8" | 3/8" | 3/16" | 1/8" | 40,000 | ASME B18.3 | — | — | 98256A301 | 00000 | 00000 | ||
| 3/8" | 10-24 | 3/8" | 3/8" | 3/16" | 1/8" | 40,000 | ASME B18.3 | — | — | 98256A302 | 00000 | 00000 | ||
| 1/2" | 10-24 | 3/8" | 3/8" | 3/16" | 1/8" | 40,000 | ASME B18.3 | — | — | 98256A303 | 00000 | 00000 | ||
| 3/4" | 10-24 | 3/8" | 3/8" | 3/16" | 1/8" | 40,000 | ASME B18.3 | — | — | 98256A304 | 00000 | 00000 | ||
| 1" | 10-24 | 3/8" | 3/8" | 3/16" | 1/8" | 40,000 | ASME B18.3 | — | — | 98256A305 | 00000 | 00000 | ||
Threaded Rods
 |
Titanium
Lg., ft. | Tensile Strength, psi | Hardness | Specs. Met | Each | |||
|---|---|---|---|---|---|---|---|
Ultra-Corrosion-Resistant Lightweight Grade 2 Titanium | |||||||
8-32 | |||||||
| 1 | 50,000 | Rockwell B80 | ASTM B348 | 96095A145 | 000000 | ||
| 3 | 50,000 | Rockwell B80 | ASTM B348 | 96095A120 | 000000 | ||
10-24 | |||||||
| 1 | 50,000 | Rockwell B80 | ASTM B348 | 96095A150 | 00000 | ||
| 3 | 50,000 | Rockwell B80 | ASTM B348 | 96095A125 | 000000 | ||
1/4"-20 | |||||||
| 1 | 50,000 | Rockwell B80 | ASTM B348 | 96095A155 | 00000 | ||
| 3 | 50,000 | Rockwell B80 | ASTM B348 | 96095A130 | 000000 | ||
5/16"-18 | |||||||
| 1 | 50,000 | Rockwell B80 | ASTM B348 | 96095A160 | 00000 | ||
| 3 | 50,000 | Rockwell B80 | ASTM B348 | 96095A135 | 000000 | ||
3/8"-16 | |||||||
| 1 | 50,000 | Rockwell B80 | ASTM B348 | 96095A165 | 00000 | ||
| 3 | 50,000 | Rockwell B80 | ASTM B348 | 96095A140 | 000000 | ||
Weld Nuts
 |
 |
Add permanent threads to thin metal with our go-to weld nuts. Unlike press-fit and rivet nuts, these nuts fuse to the base metal, so they won’t twist and pull out. Three evenly spaced projections concentrate heat away from the threads to prevent them from deforming and create consistent welds. All have a collar pilot that guides the nut into the hole, holds it in place while welding, and protects the threads from weld spatter. You can also install them on thick pieces of metal.
Grade 2 Titanium—The best choice when you need a high strength-to-weight ratio, these nuts are 40% lighter than steel nuts. They’re also our most corrosion-resistant weld nuts, standing up to salt water, strong acids, and other harsh chemicals. Weld them to titanium surfaces.
Collar | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Wd. | Ht. | Dia. | Ht. | For Hole Dia. | Specs. Met | Each | |||
Grade 2 Titanium | ||||||||||
| 10-24 | 1/2" | 3/16" | 13/32" | 0.04" | 13/32" | ASME B1.1 | 93382A110 | 000000 | ||
| 1/4"-20 | 1/2" | 3/16" | 13/32" | 0.047" | 13/32" | ASME B1.1 | 93382A120 | 00000 | ||
| 5/16"-18 | 9/16" | 7/32" | 15/32" | 0.047" | 15/32" | ASME B1.1 | 93382A130 | 00000 | ||
| 3/8"-16 | 5/8" | 1/4" | 17/32" | 0.047" | 17/32" | ASME B1.1 | 93382A140 | 00000 | ||
| 1/2"-13 | 13/16" | 3/8" | 23/32" | 0.063" | 23/32" | ASME B1.1 | 93382A150 | 00000 | ||
| M6 × 1 mm | 11 mm | 4.3 mm | 8 mm | 0.75 mm | 8 mm | DIN 929 | 93382A160 | 00000 | ||
| M8 × 1.25 mm | 14 mm | 5.6 mm | 10.5 mm | 0.9 mm | 10.5 mm | DIN 929 | 93382A170 | 00000 | ||
| M10 × 1.5 mm | 17 mm | 6.9 mm | 12.5 mm | 1.15 mm | 12.5 mm | DIN 929 | 93382A180 | 00000 | ||
