Cheese Screws | McMaster-Carr

Filter by

System of Measurement

Thread Size

Length

Head Diameter

Drive Style

Rounded Head Style

Fastener Head Type

Head Height

Thread Pitch

Material

Threading

Tip Type

Specifications Met

Thread Spacing

Thread Type

Thread Fit

Thread Direction

Rounded Head Profile

Finish

Drive Size

Tensile Strength

30,000 psi to 99,999 psi

100,000 psi or greater

Not Rated

DFARS Specialty Metals

Compliant

Exempt

Not Compliant

Export Control Classification Number (ECCN)

Hardness

REACH

RoHS

Compliant with Exemptions

Forward

How can we improve?

366 Products

Performance

Corrosion Resistant

Stay strong when exposed to moisture, chemicals, and harsh weather

242 products

Chemical Resistant

Maintain their strength when exposed to most chemicals

46 products

Drive Style

Phillips

A common drive style that aligns easily with drivers

30 products

Slotted

A simple yet effective drive style for light duty tasks

336 products

Stainless Steel Cheese Head Slotted Screws

These slotted cheese head screws won't rust or corrode from moisture and chemicals. They have a narrow profile, so they sneak past flanges and raised surfaces without snagging. With only two contact points, the slotted drive can't withstand much torque, so it's best to hand-tighten them.

Length is measured from under the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these screws won't degrade when exposed to harsh weather, salt water, and most chemicals.

		Head, mm
	Lg., mm	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M0.5 × 0.125 mm

				2	0.81	0.51	Fully Threaded	70,000	NAS721CE50-080	1	000000000	000000


				3	0.81	0.51	Fully Threaded	70,000	NAS721CE50-120	1	000000000	00000




						M0.8 × 0.2 mm

						2	1.27	0.76	Fully Threaded	70,000	NAS721CE80-080	1	000000000	0000


						3	1.27	0.76	Fully Threaded	70,000	NAS721CE80-120	1	000000000	0000




								M0.9 × 0.225 mm

								2	1.4	0.86	Fully Threaded	70,000	NAS721CE90-080	1	000000000	0000


								3	1.4	0.86	Fully Threaded	70,000	NAS721CE90-120	1	000000000	0000




										M1 × 0.25 mm

										2	2	0.7	Fully Threaded	70,000	DIN 84, ISO 1207	5	000000000	0000


										3	2	0.7	Fully Threaded	70,000	DIN 84, ISO 1207	5	000000000	00000
										4	2	0.7	Fully Threaded	70,000	DIN 84, ISO 1207	5	000000000	00000
										5	2	0.7	Fully Threaded	70,000	DIN 84, ISO 1207	5	000000000	0000
										6	2	0.7	Fully Threaded	70,000	DIN 84, ISO 1207	5	000000000	0000
										8	2	0.7	Fully Threaded	70,000	DIN 84, ISO 1207	5	000000000	0000
										10	2	0.7	Fully Threaded	70,000	DIN 84, ISO 1207	5	000000000	0000




												M1.2 × 0.25 mm

												2	2.3	0.8	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	00000


												3	2.3	0.8	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
												4	2.3	0.8	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
												5	2.3	0.8	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	00000
												6	2.3	0.8	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	00000
												8	2.3	0.8	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	00000
												10	2.3	0.8	Fully Threaded	70,000	DIN 84, ISO 1207	5	000000000	0000




												M1.4 × 0.3 mm

		2										2.6	0.9	Fully Threaded	70,000	DIN 84, ISO 1207	5	000000000	00000


		3	2.6									0.9	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
		4	2.6									0.9	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
		5	2.6									0.9	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
		6	2.6									0.9	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
		8	2.6									0.9	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
		10	2.6									0.9	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
		12	2.6									0.9	Fully Threaded	70,000	DIN 84, ISO 1207	25	000000000	00000




				M1.6 × 0.35 mm

				2	3							1	Fully Threaded	70,000	DIN 84, ISO 1207	5	000000000	0000


				3	3							1	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
				4	3							1	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
				5	3	1						Fully Threaded	70,000	DIN 84, ISO 1207	25	000000000	0000
				6	3	1	Fully Threaded					70,000	DIN 84, ISO 1207	25	000000000	0000
				8	3	1	Fully Threaded					70,000	DIN 84, ISO 1207	10	000000000	0000
				10	3	1	Fully Threaded					70,000	DIN 84, ISO 1207	25	000000000	0000
				12	3	1	Fully Threaded					70,000	DIN 84, ISO 1207	25	000000000	0000
				16	3	1	Fully Threaded					70,000	DIN 84, ISO 1207	25	000000000	00000




						M2 × 0.4 mm

						3	3.8	1.3	Fully Threaded			70,000	DIN 84, ISO 1207	100	000000000	00000


						4	3.8	1.3	Fully Threaded			70,000	DIN 84, ISO 1207	100	000000000	0000
						5	3.8	1.3	Fully Threaded			70,000	DIN 84, ISO 1207	100	000000000	00000
						6	3.8	1.3	Fully Threaded			70,000	DIN 84, ISO 1207	100	000000000	0000
						8	3.8	1.3	Fully Threaded			70,000	DIN 84, ISO 1207	100	000000000	0000
						10	3.8	1.3	Fully Threaded			70,000	DIN 84, ISO 1207	100	000000000	0000
						12	3.8	1.3	Fully Threaded			70,000	DIN 84, ISO 1207	100	000000000	0000
						14	3.8	1.3	Fully Threaded			70,000	DIN 84, ISO 1207	100	000000000	0000
						16	3.8	1.3	Fully Threaded			70,000	DIN 84, ISO 1207	100	000000000	0000
						20	3.8	1.3	Fully Threaded			70,000	DIN 84, ISO 1207	100	000000000	0000
						25	3.8	1.3	Fully Threaded			70,000	DIN 84, ISO 1207	50	000000000	00000




								M2.5 × 0.45 mm

								3	4.5	1.6	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000


								4	4.5	1.6	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	0000
								5	4.5	1.6	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	0000
								6	4.5	1.6	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	0000
								8	4.5	1.6	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	0000
								10	4.5	1.6	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000
12								4.5	1.6	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	0000
14	4.5							1.6	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	0000
16	4.5							1.6	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000
20	4.5							1.6	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000
25	4.5							1.6	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000


30	4.5							1.6	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000




								M3 × 0.5 mm

								4	4	1.9	Fully Threaded	70,000	DIN 920	25	000000000	00000


		4	5.5					2	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000
		5	4					1.9	Fully Threaded	70,000	DIN 920	25	000000000	00000
		5	5.5					2	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	0000
		6	4					1.9	Fully Threaded	70,000	DIN 920	25	000000000	00000
		6	5.5					2	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	0000
		8	4					1.9	Fully Threaded	70,000	DIN 920	10	000000000	0000
		8	5.5					2	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	0000
		10	4					1.9	Partially Threaded	70,000	DIN 920	10	000000000	0000
		10	5.5					2	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000
		12	4					1.9	Partially Threaded	70,000	DIN 920	10	000000000	0000


		12	5.5					2	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000
		14	5.5					2	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000
		16	4					1.9	Partially Threaded	70,000	DIN 920	10	000000000	0000
		16	5.5					2	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000
		20	5.5	2				Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000
		25	5.5	2	Fully Threaded			70,000	DIN 84, ISO 1207	100	000000000	00000
		30	5.5	2	Fully Threaded			70,000	DIN 84, ISO 1207	100	000000000	00000
		35	5.5	2	Fully Threaded			70,000	DIN 84, ISO 1207	100	000000000	00000
		40	5.5	2	Fully Threaded			70,000	DIN 84, ISO 1207	50	000000000	00000
		45	5.5	2	Fully Threaded			70,000	DIN 84, ISO 1207	50	000000000	00000


		50	5.5	2	Fully Threaded			70,000	DIN 84, ISO 1207	25	000000000	0000




				M3.5 × 0.6 mm

				6	6			2.4	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	0000


				8	6			2.4	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000
				10	6			2.4	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	0000
				12	6	2.4		Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000
				16	6	2.4	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	0000
				20	6	2.4	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000
				25	6	2.4	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000
				40	6	2.4	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000




						M4 × 0.7 mm

						4	5.5	2.5	Fully Threaded	70,000	DIN 920	10	000000000	0000


						4	7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	0000
						5	7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000
						6	5.5	2.5	Fully Threaded	70,000	DIN 920	10	000000000	0000
						6	7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000
						8	5.5	2.5	Fully Threaded	70,000	DIN 920	10	000000000	0000
						8	7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000
						10	5.5	2.5	Fully Threaded	70,000	DIN 920	10	000000000	0000
10						7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	0000
12	5.5					2.5	Fully Threaded	70,000	DIN 920	10	000000000	0000
12	7					2.6	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000


14	7					2.6	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000
16	5.5					2.5	Partially Threaded	70,000	DIN 920	10	000000000	0000
16	7					2.6	Fully Threaded	70,000	DIN 84, ISO 1207	100	000000000	00000
18	7					2.6	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000
20	7					2.6	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	0000
25	7					2.6	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000
30	7					2.6	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	0000
35	7					2.6	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	0000
40	7					2.6	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	0000
45	7					2.6	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000


50	7					2.6	Fully Threaded	70,000	DIN 84, ISO 1207	25	000000000	0000
60	7					2.6	Fully Threaded	70,000	DIN 84, ISO 1207	25	000000000	00000
70	7					2.6	Fully Threaded	70,000	DIN 84, ISO 1207	25	000000000	00000
80	7					2.6	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000




						M5 × 0.8 mm

						5	6.5	2.8	Fully Threaded	70,000	DIN 920	10	000000000	0000


						6	6.5	2.8	Fully Threaded	70,000	DIN 920	10	000000000	0000
						6	8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000
						8	6.5	2.8	Fully Threaded	70,000	DIN 920	10	000000000	0000
						8	8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	0000
		10				6.5	2.8	Fully Threaded	70,000	DIN 920	10	000000000	00000
		10	8.5			3.3	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	0000
		12	6.5			2.8	Fully Threaded	70,000	DIN 920	10	000000000	00000
		12	8.5			3.3	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	0000
		14	8.5			3.3	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000
		16	6.5			2.8	Partially Threaded	70,000	DIN 920	10	000000000	0000


		16	8.5			3.3	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000
		18	8.5			3.3	Fully Threaded	70,000	DIN 84, ISO 1207	25	000000000	00000
		20	6.5			2.8	Partially Threaded	70,000	DIN 920	10	000000000	0000
		20	8.5			3.3	Fully Threaded	70,000	DIN 84, ISO 1207	25	000000000	0000
		25	8.5			3.3	Fully Threaded	70,000	DIN 84, ISO 1207	25	000000000	0000
		30	8.5			3.3	Fully Threaded	70,000	DIN 84, ISO 1207	25	000000000	0000
		35	8.5			3.3	Fully Threaded	70,000	DIN 84, ISO 1207	25	000000000	00000
		40	8.5			3.3	Fully Threaded	70,000	DIN 84, ISO 1207	25	000000000	00000
		45	8.5	3.3		Fully Threaded	70,000	DIN 84, ISO 1207	25	000000000	00000
		50	8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000


		60	8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
		70	8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
		80	8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000




				M6 × 1 mm

				8	8	3.3	Fully Threaded	70,000	DIN 920	10	000000000	00000


				8	10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000
				10	8	3.3	Fully Threaded	70,000	DIN 920	10	000000000	00000
				10	10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000
				12	10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000
				16	10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000
				20	10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000
				25	10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	50	000000000	00000
				30	10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	25	000000000	0000
				35	10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	25	000000000	00000
				40	10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	25	000000000	00000


				45	10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	25	000000000	00000
				50	10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
				60	10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
				70	10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	00000




						M8 × 1.25 mm

12	13					5	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000


16	13					5	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
20	13					5	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
25	13					5	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	0000
30	13					5	Fully Threaded	70,000	DIN 84, ISO 1207	10	000000000	00000
40	13					5	Fully Threaded	70,000	DIN 84, ISO 1207	5	000000000	00000


Highly Corrosion-Resistant 316 Stainless Steel







								M1.6 × 0.35 mm

								3	3	1	Fully Threaded	100,000	DIN 84	50	000000000	00000


								4	3	1	Fully Threaded	100,000	DIN 84	50	000000000	00000
								5	3	1	Fully Threaded	100,000	DIN 84	50	000000000	00000
								6	3	1	Fully Threaded	100,000	DIN 84	50	000000000	00000
								8	3	1	Fully Threaded	100,000	DIN 84	50	000000000	00000
								10	3	1	Fully Threaded	100,000	DIN 84	50	000000000	00000
								12	3	1	Fully Threaded	100,000	DIN 84	50	000000000	00000




										M2 × 0.4 mm

										3	3.8	1.3	Fully Threaded	100,000	DIN 84	100	000000000	00000


		4	3.8							1.3	Fully Threaded	100,000	DIN 84, ISO 1207	100	000000000	00000
		5	3.8							1.3	Fully Threaded	100,000	DIN 84, ISO 1207	100	000000000	0000
		6	3.8							1.3	Fully Threaded	100,000	DIN 84, ISO 1207	100	000000000	0000
		8	3.8							1.3	Fully Threaded	100,000	DIN 84, ISO 1207	100	000000000	00000
		10	3.8							1.3	Fully Threaded	100,000	DIN 84, ISO 1207	100	000000000	00000




										M2.5 × 0.45 mm

										4	4.5	1.6	Fully Threaded	100,000	DIN 84	100	000000000	00000


										5	4.5	1.6	Fully Threaded	100,000	DIN 84	100	000000000	00000
										6	4.5	1.6	Fully Threaded	100,000	DIN 84	100	000000000	00000
										8	4.5	1.6	Fully Threaded	100,000	DIN 84	100	000000000	00000
										10	4.5	1.6	Fully Threaded	100,000	DIN 84	100	000000000	00000




												M3 × 0.5 mm

				5	5.5							2	Fully Threaded	100,000	DIN 84, ISO 1207	100	000000000	00000


				6	5.5							2	Fully Threaded	100,000	DIN 84, ISO 1207	50	000000000	00000
				8	5.5							2	Fully Threaded	100,000	DIN 84, ISO 1207	100	000000000	00000
				10	5.5							2	Fully Threaded	100,000	DIN 84, ISO 1207	100	000000000	00000
				12	5.5							2	Fully Threaded	100,000	DIN 84, ISO 1207	50	000000000	0000
				20	5.5							2	Fully Threaded	100,000	DIN 84, ISO 1207	50	000000000	00000




												M3.5 × 0.6 mm

5	6											2.4	Fully Threaded	100,000	DIN 84, ISO 1207	25	000000000	0000


6	6											2.4	Fully Threaded	100,000	DIN 84, ISO 1207	25	000000000	0000
8	6					2.4						Fully Threaded	100,000	DIN 84, ISO 1207	25	000000000	0000
10	6					2.4	Fully Threaded					100,000	DIN 84, ISO 1207	25	000000000	0000




						M4 × 0.7 mm

						5	7					2.6	Fully Threaded	100,000	DIN 84, ISO 1207	25	000000000	0000


						6	7					2.6	Fully Threaded	100,000	DIN 84, ISO 1207	50	000000000	00000
						8	7					2.6	Fully Threaded	100,000	DIN 84, ISO 1207	50	000000000	00000
						10	7					2.6	Fully Threaded	100,000	DIN 84, ISO 1207	50	000000000	0000
						12	7					2.6	Fully Threaded	100,000	DIN 84, ISO 1207	50	000000000	00000
						16	7					2.6	Fully Threaded	100,000	DIN 84, ISO 1207	25	000000000	0000




								M5 × 0.8 mm

								8	8.5			3.3	Fully Threaded	100,000	DIN 84, ISO 1207	25	000000000	0000


								10	8.5			3.3	Fully Threaded	100,000	DIN 84, ISO 1207	25	000000000	0000
								12	8.5			3.3	Fully Threaded	100,000	DIN 84, ISO 1207	25	000000000	00000
								16	8.5			3.3	Fully Threaded	100,000	DIN 84, ISO 1207	25	000000000	0000
								20	8.5			3.3	Fully Threaded	100,000	DIN 84	25	000000000	00000
		30						8.5	3.3			Fully Threaded	100,000	DIN 84, ISO 1207	25	000000000	00000




								M6 × 1 mm

								8	10			3.9	Fully Threaded	100,000	DIN 84, ISO 1207	10	000000000	0000


								10	10			3.9	Fully Threaded	100,000	DIN 84, ISO 1207	25	000000000	00000
								12	10			3.9	Fully Threaded	100,000	DIN 84, ISO 1207	10	000000000	0000
								16	10			3.9	Fully Threaded	100,000	DIN 84, ISO 1207	10	000000000	0000
								20	10			3.9	Fully Threaded	100,000	DIN 84	25	000000000	00000
								25	10			3.9	Fully Threaded	100,000	DIN 84	25	000000000	00000

Stainless Steel Cheese Head Phillips Screws

Our most corrosion-resistant cheese head Phillips screws. They have a narrow profile, so they sneak past flanges and raised surfaces without snagging. The Phillips drive easily aligns with drivers and withstands more torque than slotted drives, but drivers slip when you apply too much force.

Length is measured from under the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.

		Head, mm
	Lg., mm	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M2 × 0.4 mm

				3	3.8	1.4	Fully Threaded	100,000	ISO 7048	50	000000000	00000


				4	3.8	1.4	Fully Threaded	100,000	ISO 7048	50	000000000	00000
				5	3.8	1.4	Fully Threaded	100,000	ISO 7048	50	000000000	0000
				6	3.8	1.4	Fully Threaded	100,000	ISO 7048	50	000000000	00000
				8	3.8	1.4	Fully Threaded	100,000	ISO 7048	100	000000000	0000




						M2.5 × 0.45 mm

						4	4.5	1.8	Fully Threaded	100,000	ISO 7048	50	000000000	00000


						6	4.5	1.8	Fully Threaded	100,000	ISO 7048	50	000000000	00000
						8	4.5	1.8	Fully Threaded	100,000	ISO 7048	50	000000000	00000
						10	4.5	1.8	Fully Threaded	100,000	ISO 7048	50	000000000	00000




								M3 × 0.5 mm

								4	5.5	2	Fully Threaded	100,000	ISO 7048	50	000000000	00000


								5	5.5	2	Fully Threaded	100,000	ISO 7048	100	000000000	00000
								6	5.5	2	Fully Threaded	100,000	ISO 7048	50	000000000	00000
								8	5.5	2	Fully Threaded	100,000	ISO 7048	50	000000000	00000
								10	5.5	2	Fully Threaded	100,000	ISO 7048	50	000000000	00000
								12	5.5	2	Fully Threaded	100,000	ISO 7048	50	000000000	00000




										M4 × 0.7 mm

										6	7	2.6	Fully Threaded	100,000	ISO 7048	25	000000000	00000


										8	7	2.6	Fully Threaded	100,000	ISO 7048	25	000000000	0000
										10	7	2.6	Fully Threaded	100,000	ISO 7048	25	000000000	00000
										12	7	2.6	Fully Threaded	100,000	ISO 7048	25	000000000	00000
										16	7	2.6	Fully Threaded	100,000	ISO 7048	25	000000000	00000




												M5 × 0.8 mm

												8	8.5	3.3	Fully Threaded	100,000	ISO 7048	25	000000000	00000


10												8.5	3.3	Fully Threaded	100,000	ISO 7048	25	000000000	00000
12	8.5											3.3	Fully Threaded	100,000	ISO 7048	10	000000000	0000
16	8.5											3.3	Fully Threaded	100,000	ISO 7048	10	000000000	0000
20	8.5											3.3	Fully Threaded	100,000	ISO 7048	10	000000000	0000




		M6 × 1 mm

		8	10									3.9	Fully Threaded	100,000	ISO 7048	10	000000000	0000


		10	10									3.9	Fully Threaded	100,000	ISO 7048	10	000000000	0000
		12	10									3.9	Fully Threaded	100,000	ISO 7048	10	000000000	0000
		16	10									3.9	Fully Threaded	100,000	ISO 7048	10	000000000	0000
		20	10									3.9	Fully Threaded	100,000	ISO 7048	10	000000000	0000

Steel Cheese Head Slotted Screws

One of the narrowest rounded head styles, the cheese head fits into tight spaces, such as crowded electrical panels. With only two contact points, the slotted drive can't withstand much torque, so it's best to hand-tighten them.

Length is measured from under the head.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

		Head, mm
	Lg., mm	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				M1.6 × 0.35 mm

				2	3	1	Fully Threaded	60,000	DIN 84, ISO 1207	10	000000000	00000


				3	3	1	Fully Threaded	60,000	DIN 84, ISO 1207	10	000000000	0000
				4	3	1	Fully Threaded	60,000	DIN 84, ISO 1207	10	000000000	0000
				5	3	1	Fully Threaded	60,000	DIN 84, ISO 1207	10	000000000	0000
				6	3	1	Fully Threaded	60,000	DIN 84, ISO 1207	10	000000000	0000
				8	3	1	Fully Threaded	60,000	DIN 84, ISO 1207	10	000000000	0000




						M2 × 0.4 mm

						3	3.8	1.3	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000


						4	3.8	1.3	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000
						5	3.8	1.3	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000
						6	3.8	1.3	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000
						8	3.8	1.3	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000
						10	3.8	1.3	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000
						12	3.8	1.3	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000




								M2.5 × 0.45 mm

								3	4.5	1.6	Fully Threaded	60,000	DIN 84, ISO 1207	50	000000000	00000


								4	4.5	1.6	Fully Threaded	60,000	DIN 84, ISO 1207	50	000000000	0000
								5	4.5	1.6	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000
								6	4.5	1.6	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000
								8	4.5	1.6	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000
								10	4.5	1.6	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000
								12	4.5	1.6	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000




										M3 × 0.5 mm

										3	4	2	Fully Threaded	60,000	DIN 920	100	000000000	00000


										4	4	2	Fully Threaded	60,000	DIN 920	100	000000000	00000
										4	5.5	2	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000
										5	4	2	Fully Threaded	60,000	DIN 920	100	000000000	00000
										5	5.5	2	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000
										6	4	2	Fully Threaded	60,000	DIN 920	100	000000000	00000
										6	5.5	2	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000
										8	4	2	Fully Threaded	60,000	DIN 920	100	000000000	00000
										8	5.5	2	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000
10										4	2	Partially Threaded	60,000	DIN 920	100	000000000	00000
10	5.5									2	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000


12	4									2	Partially Threaded	60,000	DIN 920	100	000000000	00000
12	5.5	2								Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000
16	4	2	Partially Threaded							60,000	DIN 920	100	000000000	00000
16	5.5	2	Fully Threaded							60,000	DIN 84, ISO 1207	100	000000000	0000
20	5.5	2	Fully Threaded							60,000	DIN 84, ISO 1207	100	000000000	0000
25	5.5	2	Fully Threaded							60,000	DIN 84, ISO 1207	100	000000000	0000




		M4 × 0.7 mm

		5	7							2.6	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000


		6	5.5							2.6	Fully Threaded	60,000	DIN 920	100	000000000	00000
		6	7	2.6						Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	0000
		8	5.5	2.6	Fully Threaded					60,000	DIN 920	100	000000000	00000
		8	7	2.6	Fully Threaded					60,000	DIN 84, ISO 1207	100	000000000	0000
		10	5.5	2.6	Fully Threaded					60,000	DIN 920	100	000000000	00000
		10	7	2.6	Fully Threaded					60,000	DIN 84, ISO 1207	100	000000000	0000
		12	5.5	2.6	Fully Threaded					60,000	DIN 920	100	000000000	00000
		12	7	2.6	Fully Threaded					60,000	DIN 84, ISO 1207	100	000000000	0000
		16	5.5	2.6	Partially Threaded					60,000	DIN 920	100	000000000	00000
		16	7	2.6	Fully Threaded					60,000	DIN 84, ISO 1207	100	000000000	0000


		20	7	2.6	Fully Threaded					60,000	DIN 84, ISO 1207	100	000000000	0000
		25	7	2.6	Fully Threaded					60,000	DIN 84, ISO 1207	100	000000000	0000
		30	7	2.6	Fully Threaded					60,000	DIN 84, ISO 1207	100	000000000	0000
		35	7	2.6	Fully Threaded					60,000	DIN 84, ISO 1207	100	000000000	0000
		40	7	2.6	Fully Threaded	60,000				DIN 84, ISO 1207	50	000000000	00000




				M5 × 0.8 mm

				6	8.5	3.3	Fully Threaded			60,000	DIN 84, ISO 1207	100	000000000	0000


				8	8.5	3.3	Fully Threaded			60,000	DIN 84, ISO 1207	100	000000000	00000
				10	8.5	3.3	Fully Threaded			60,000	DIN 84, ISO 1207	100	000000000	00000
				12	8.5	3.3	Fully Threaded			60,000	DIN 84, ISO 1207	100	000000000	00000
				16	8.5	3.3	Fully Threaded			60,000	DIN 84, ISO 1207	100	000000000	00000
				20	8.5	3.3	Fully Threaded			60,000	DIN 84, ISO 1207	100	000000000	00000
				25	8.5	3.3	Fully Threaded			60,000	DIN 84, ISO 1207	100	000000000	00000
				30	8.5	3.3	Fully Threaded	60,000		DIN 84, ISO 1207	100	000000000	00000
				35	8.5	3.3	Fully Threaded	60,000	DIN 84, ISO 1207	50	000000000	0000
				40	8.5	3.3	Fully Threaded	60,000	DIN 84, ISO 1207	25	000000000	0000




						M6 × 1 mm

						8	10	3.9	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	00000


						10	10	3.9	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	00000
						12	10	3.9	Fully Threaded	60,000	DIN 84, ISO 1207	100	000000000	00000
						16	10	3.9	Fully Threaded	60,000	DIN 84, ISO 1207	50	000000000	0000
						20	10	3.9	Fully Threaded	60,000	DIN 84, ISO 1207	50	000000000	0000
						25	10	3.9	Fully Threaded	60,000	DIN 84, ISO 1207	50	000000000	00000
						30	10	3.9	Fully Threaded	60,000	DIN 84, ISO 1207	25	000000000	0000
						35	10	3.9	Fully Threaded	60,000	DIN 84, ISO 1207	25	000000000	0000
						40	10	3.9	Fully Threaded	60,000	DIN 84, ISO 1207	25	000000000	0000

Plastic Cheese Head Slotted Screws

Combine the lightweight and nonconductive properties of plastic with a narrow cheese head that fits into tight spaces. These screws are a good choice to attach panels and covers to electronics and to secure objects in crowded electrical enclosures. With only two contact points, the slotted drive can't withstand much torque, so it's best to hand-tighten them.

Length is measured from under the head.

Nylon—The most common plastic rounded head screws, these are good for general purpose fastening. Slippery and abrasion resistant, they thread in smoothly and stand up to daily wear and tear. Nylon will swell and weaken when exposed to moisture, so these screws are best for dry environments.

			Head, mm
	Lg., mm	Threading	Dia.	Ht.	Tensile Strength	Temp. Range, ° F	Choose a Color	Pkg. Qty.		Pkg.
Nylon







				M2 × 0.4 mm

				8	Fully Threaded	3.8	1.3	Not Rated	-40 to 185	Black , Off-White	100	000000000	000000


				10	Fully Threaded	3.8	1.3	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
				12	Fully Threaded	3.8	1.3	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
				16	Fully Threaded	3.8	1.3	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000




						M3 × 0.5 mm

						5	Fully Threaded	5.5	2	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000


						6	Fully Threaded	5.5	2	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
						8	Fully Threaded	5.5	2	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
						10	Fully Threaded	5.5	2	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
						12	Fully Threaded	5.5	2	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
						16	Fully Threaded	5.5	2	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
						20	Fully Threaded	5.5	2	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
						25	Fully Threaded	5.5	2	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
						30	Fully Threaded	5.5	2	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000




								M4 × 0.7 mm

								6	Fully Threaded	7	2.6	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000


								8	Fully Threaded	7	2.6	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
								10	Fully Threaded	7	2.6	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
								12	Fully Threaded	7	2.6	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
								16	Fully Threaded	7	2.6	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
								20	Fully Threaded	7	2.6	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
								25	Fully Threaded	7	2.6	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
								30	Fully Threaded	7	2.6	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
								35	Fully Threaded	7	2.6	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000




										M5 × 0.8 mm

										8	Fully Threaded	8.5	3.3	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000


										10	Fully Threaded	8.5	3.3	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
										12	Fully Threaded	8.5	3.3	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
										16	Fully Threaded	8.5	3.3	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
										20	Fully Threaded	8.5	3.3	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
										25	Fully Threaded	8.5	3.3	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
										30	Fully Threaded	8.5	3.3	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
40										Fully Threaded	8.5	3.3	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000




		M6 × 1 mm

		8	Fully Threaded							10	3.9	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000


		10	Fully Threaded							10	3.9	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
		12	Fully Threaded							10	3.9	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
		16	Fully Threaded							10	3.9	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
		20	Fully Threaded							10	3.9	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
		25	Fully Threaded							10	3.9	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
		30	Fully Threaded							10	3.9	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
		35	Fully Threaded							10	3.9	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
		40	Fully Threaded							10	3.9	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
		45	Fully Threaded	10						3.9	Not Rated	-40 to 185	Black , Off-White	100	000000000	00000
		50	Fully Threaded	10	3.9					Not Rated	-40 to 185	Black , Off-White	100	000000000	00000




				M8 × 1.25 mm

				16	Fully Threaded					13	5	Not Rated	-40 to 185	Black , Off-White	25	000000000	00000


				20	Fully Threaded					13	5	Not Rated	-40 to 185	Black , Off-White	25	000000000	00000
				25	Fully Threaded					13	5	Not Rated	-40 to 185	Black , Off-White	25	000000000	00000
				30	Fully Threaded					13	5	Not Rated	-40 to 185	Black , Off-White	25	000000000	00000
				50	Fully Threaded					13	5	Not Rated	-40 to 185	Black , Off-White	25	000000000	00000

Extended-Tip Stainless Steel Cheese Head Slotted Screws

Guide screws into holes while keeping them straight and aligned when fastening in corrosive environments. Like a dowel pin, the tip on the shaft also fits into mating holes to keep parts aligned or hold them together, such as on shafts and other moving parts. With a narrow profile, the head sneaks past nearby flanges and raised surfaces without snagging. With only two contact points, the slotted drive can't withstand much torque, so it's best to hand-tighten them. Also known as full dog point screws.

Length is measured from under the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.

		Head, mm		Tip, mm
	Lg., mm	Dia.	Ht.	Dia.	Lg.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M3 × 0.5 mm

				4	4	1.9	2	2.5	Fully Threaded	90,000	DIN 922	1	000000000	00000




						M4 × 0.7 mm

						6	5.5	2.5	2.8	4	Fully Threaded	90,000	DIN 922	1	000000000	0000




								M5 × 0.8 mm

								6	6.5	2.8	3.5	4	Fully Threaded	90,000	DIN 922	1	000000000	0000




										M6 × 1 mm

										10	8	3.3	4.5	4	Fully Threaded	90,000	DIN 922	1	000000000	0000




												M8 × 1.25 mm

												10	10	4	6	6	Fully Threaded	90,000	DIN 922	1	000000000	0000




														M10 × 1.5 mm

														16	13	4.8	7.5	10	Fully Threaded	90,000	DIN 922	1	000000000	0000

Extended-Tip Steel Cheese Head Slotted Screws

The tip of these screws guides them into holes, keeping the screw straight and aligned. Like a dowel pin, you can also fit the tip into mating holes to hold parts together, such as on shafts and other moving parts. With a narrow profile, the head sneaks past flanges and raised surfaces without snagging. With only two contact points, the slotted drive can't withstand much torque, so it's best to hand-tighten them. Also known as full dog point screws.

Length is measured from under the head.

Black-Oxide Steel—Typically chosen for their appearance, these screws have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

		Head, mm		Tip, mm
	Lg., mm	Dia.	Ht.	Dia.	Lg.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
Black-Oxide Steel







				M3 × 0.5 mm

				4	4	2	2	2.5	Fully Threaded	60,000	DIN 922	1	000000000	00000




						M4 × 0.7 mm

						6	5.5	2.6	2.8	4	Fully Threaded	60,000	DIN 922	1	000000000	0000




								M5 × 0.8 mm

								6	6.5	2.8	3.5	4	Fully Threaded	60,000	DIN 922	1	000000000	0000




										M6 × 1 mm

										10	8	3.3	4.5	4	Fully Threaded	60,000	DIN 922	1	000000000	0000




												M8 × 1.25 mm

												10	10	4	6	6	Fully Threaded	60,000	DIN 922	1	000000000	0000




														M10 × 1.5 mm

														16	13	4.8	7.5	10	Fully Threaded	60,000	DIN 922	1	000000000	0000