About Set Screws
More
Metric Alloy Steel Cup-Point Set Screws

These alloy steel set screws have a thin edge that digs into hard surfaces for a secure hold. Length listed is the overall length.
Metric 18-8 Stainless Steel Cup-Point Set Screws

18-8 stainless steel set screws are chemical resistant and may be mildly magnetic. They have a thin edge that digs into the contact surface for a secure hold. Length listed is the overall length.
Lg., mm | Drive Size, mm | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||
---|---|---|---|---|---|---|
M1.6 × 0.35 mm | ||||||
2.5 | 0.7 | Not Rated | DIN 916, ISO 4029 | 5 | 000000000 | 00000 |
3 | 0.7 | Not Rated | DIN 916, ISO 4029 | 10 | 000000000 | 0000 |
4 | 0.7 | Not Rated | DIN 916, ISO 4029 | 10 | 000000000 | 0000 |
5 | 0.7 | Not Rated | DIN 916, ISO 4029 | 10 | 000000000 | 00000 |
6 | 0.7 | Not Rated | DIN 916, ISO 4029 | 10 | 000000000 | 0000 |
Metric 18-8 Stainless Steel Flat-Tip Set Screws

18-8 stainless steel set screws are chemical resistant and may be mildly magnetic. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage. Length listed is the overall length.
Lg., mm | Drive Size, mm | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||
---|---|---|---|---|---|---|
M1.4 × 0.3 mm | ||||||
5 | 0.7 | Not Rated | DIN 913, ISO 4026 | 5 | 000000000 | 000000 |
M1.6 × 0.35 mm | ||||||
2 | 0.7 | Not Rated | DIN 913, ISO 4026 | 50 | 000000000 | 00000 |
2.5 | 0.7 | Not Rated | DIN 913, ISO 4026 | 25 | 000000000 | 00000 |
3 | 0.7 | Not Rated | DIN 913, ISO 4026 | 25 | 000000000 | 0000 |
4 | 0.7 | Not Rated | DIN 913, ISO 4026 | 25 | 000000000 | 00000 |
5 | 0.7 | Not Rated | DIN 913, ISO 4026 | 25 | 000000000 | 00000 |
6 | 0.7 | Not Rated | DIN 913, ISO 4026 | 25 | 000000000 | 00000 |
Metric Alloy Steel Flat-Tip Set Screws

These set screws have a tip that makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage. Length listed is the overall length.
Static-Control Precise-Control Screwdriver Sets






The handle on these assorted ESD-safe screwdrivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. They meet IEC 61340-5-1 requirements for protecting electronic devices from electrostatic discharge. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.
Warning: Because the handle conducts electricity, screwdrivers must not come in contact with sources of electrical power.
Number of Pieces | Includes | Material | Handle Material | Surface Resistivity, ohms-cm. | Each | |
7 | 0.7 mm Hex Screwdriver—4 23/32" O'all Lg. 0.9 mm Hex Screwdriver—4 23/32" O'all Lg. 1.3 mm Hex Screwdriver—4 23/32" O'all Lg. 1.5 mm Hex Screwdriver—5 23/32" O'all Lg. 2 mm Hex Screwdriver—5 23/32" O'all Lg. 2.5 mm Hex Screwdriver—6 11/16" O'all Lg. 3 mm Hex Screwdriver—6 11/16" O'all Lg. | Chrome-Plated Steel | Plastic | 106-109 | 0000000 | 000000 |
50 | Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 0.031", 0.039", 0.047", 0.059", 0.079", 0.098", 0.118", 0.138", 0.157" Hex Screwdrivers (Inch): 1/16", 3/32", 7/64", 1/8" Hex Screwdrivers (Metric): 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20 Nutdrivers: (Metric) 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm; (Inch): 1/8", 5/32", 3/16", 1/4" 5 3/4" Lg. Chip Lifter | Chrome-Plated Steel | Plastic | 106-109 | 0000000 | 000000 |