DIN 964 Screws | McMaster-Carr

Filter by

System of Measurement

Metric

Thread Size

Fastener Head Type

Length

Drive Style

Material

Oval Head Profile

Head Diameter

Thread Pitch

Head Height

Countersink Angle

Thread Type

Threading

Thread Direction

Tensile Strength

30,000 psi to 99,999 psi

100,000 psi or greater

Tip Type

Thread Spacing

Performance

Sold As

DFARS Specialty Metals

Exempt

Not Compliant

Export Control Classification Number (ECCN)

EAR99

REACH

Compliant

RoHS

Compliant

Compliant with Exemptions

Oval Top Height

Thread Fit

48 Products

Performance

Conductive

Conduct electricity better than other screws

24 products

Nonmagnetic

Won't damage or interfere with electronics

24 products

Oval Head Profile

Standard

The most common head profile for oval head screws

24 products

Undercut

About 20% shorter than standard-profile heads

24 products

Stainless Steel Slotted Oval Head Screws

The most corrosion-resistant slotted oval head screws we offer. Made of stainless steel, they won't rust or corrode when exposed to moisture and chemicals. With only two contact points, the slotted drive is the most basic drive style. The slot can't withstand much torque, so it's best to hand-tighten them instead of using power tools.

Length is measured from the top of the bevel.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws resist rust.

Undercut—With a head that's about 20% shorter than standard-profile heads, these screws are ideal for fastening thin materials that have shallow countersunk holes. The reduced head height also gives space for more threading along the shaft, so short screws get a strong grip on thin material.

			Head, mm
	Lg., mm	Oval Head Profile	Dia.	Ht.	Oval Top Ht., mm	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M3 × 0.5 mm

				5	Undercut	5.60	2.40	0.75	Fully Threaded	100,000	DIN 964	100	000000000	00000


				6	Undercut	5.60	2.40	0.75	Fully Threaded	100,000	DIN 964	100	000000000	0000
				8	Undercut	5.60	2.40	0.75	Fully Threaded	100,000	DIN 964	100	000000000	0000
				10	Undercut	5.60	2.40	0.75	Fully Threaded	100,000	DIN 964	100	000000000	00000
				12	Undercut	5.60	2.40	0.75	Fully Threaded	100,000	DIN 964	100	000000000	00000




						M4 × 0.7 mm

						6	Undercut	7.50	3.20	1.00	Fully Threaded	100,000	DIN 964	100	000000000	0000


						8	Undercut	7.50	3.20	1.00	Fully Threaded	100,000	DIN 964	100	000000000	00000
						10	Undercut	7.50	3.20	1.00	Fully Threaded	100,000	DIN 964	100	000000000	00000
						12	Undercut	7.50	3.20	1.00	Fully Threaded	100,000	DIN 964	100	000000000	00000
						16	Undercut	7.50	3.20	1.00	Fully Threaded	100,000	DIN 964	100	000000000	00000




								M5 × 0.8 mm

								8	Undercut	9.20	3.75	1.25	Fully Threaded	100,000	DIN 964	50	000000000	0000


								10	Undercut	9.20	3.75	1.25	Fully Threaded	100,000	DIN 964	50	000000000	0000
								12	Undercut	9.20	3.75	1.25	Fully Threaded	100,000	DIN 964	50	000000000	00000
								16	Undercut	9.20	3.75	1.25	Fully Threaded	100,000	DIN 964	50	000000000	00000
								20	Undercut	9.20	3.75	1.25	Fully Threaded	100,000	DIN 964	50	000000000	00000




										M6 × 1 mm

										12	Undercut	11.00	4.50	1.50	Fully Threaded	100,000	DIN 964	50	000000000	00000


										16	Undercut	11.00	4.50	1.50	Fully Threaded	100,000	DIN 964	50	000000000	00000
										20	Undercut	11.00	4.50	1.50	Fully Threaded	100,000	DIN 964	50	000000000	00000
										25	Undercut	11.00	4.50	1.50	Fully Threaded	100,000	DIN 964	50	000000000	00000
										30	Undercut	11.00	4.50	1.50	Fully Threaded	100,000	DIN 964	50	000000000	00000




												M8 × 1.25 mm

												16	Undercut	14.50	6.00	2.00	Fully Threaded	100,000	DIN 964	25	000000000	00000


20												Undercut	14.50	6.00	2.00	Fully Threaded	100,000	DIN 964	25	000000000	00000
25	Undercut											14.50	6.00	2.00	Fully Threaded	100,000	DIN 964	25	000000000	00000
30	Undercut											14.50	6.00	2.00	Fully Threaded	100,000	DIN 964	10	000000000	0000

Brass Slotted Oval Head Screws

These brass screws have a shiny look and won't rust in damp environments. They're also conductive and nonmagnetic, making them useful for electrical applications. With only two contact points, the slotted drive is the most basic drive style. The slot can't withstand much torque, so it's best to hand-tighten them instead of using power tools.

Length is measured from the top of the bevel.

Standard—Standard-profile heads are the most common choice for oval head screws.

			Head, mm
	Lg., mm	Oval Head Profile	Dia.	Ht.	Oval Top Ht., mm	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
Brass







				M3 × 0.5 mm

				5	Standard	5.60	2.40	0.75	Fully Threaded	50,000	DIN 964, ISO 2010	100	000000000	000000


				6	Standard	5.60	2.40	0.75	Fully Threaded	50,000	DIN 964, ISO 2010	100	000000000	00000
				8	Standard	5.60	2.40	0.75	Fully Threaded	50,000	DIN 964, ISO 2010	100	000000000	00000
				10	Standard	5.60	2.40	0.75	Fully Threaded	50,000	DIN 964, ISO 2010	100	000000000	00000
				12	Standard	5.60	2.40	0.75	Fully Threaded	50,000	DIN 964, ISO 2010	100	000000000	00000




						M4 × 0.7 mm

						6	Standard	7.50	3.20	1.00	Fully Threaded	50,000	DIN 964, ISO 2010	100	000000000	00000


						8	Standard	7.50	3.20	1.00	Fully Threaded	50,000	DIN 964, ISO 2010	100	000000000	00000
						10	Standard	7.50	3.20	1.00	Fully Threaded	50,000	DIN 964, ISO 2010	100	000000000	00000
						12	Standard	7.50	3.20	1.00	Fully Threaded	50,000	DIN 964, ISO 2010	50	000000000	0000
						16	Standard	7.50	3.20	1.00	Fully Threaded	50,000	DIN 964, ISO 2010	50	000000000	0000




								M5 × 0.8 mm

								8	Standard	9.20	3.75	1.25	Fully Threaded	50,000	DIN 964, ISO 2010	50	000000000	0000


								10	Standard	9.20	3.75	1.25	Fully Threaded	50,000	DIN 964, ISO 2010	50	000000000	0000
								12	Standard	9.20	3.75	1.25	Fully Threaded	50,000	DIN 964, ISO 2010	50	000000000	00000
								16	Standard	9.20	3.75	1.25	Fully Threaded	50,000	DIN 964, ISO 2010	50	000000000	00000
								20	Standard	9.20	3.75	1.25	Fully Threaded	50,000	DIN 964, ISO 2010	25	000000000	0000




										M6 × 1 mm

										12	Standard	11.00	4.50	1.50	Fully Threaded	50,000	DIN 964, ISO 2010	25	000000000	0000


										16	Standard	11.00	4.50	1.50	Fully Threaded	50,000	DIN 964, ISO 2010	25	000000000	0000
										20	Standard	11.00	4.50	1.50	Fully Threaded	50,000	DIN 964, ISO 2010	25	000000000	00000
										25	Standard	11.00	4.50	1.50	Fully Threaded	50,000	DIN 964, ISO 2010	25	000000000	00000
										30	Standard	11.00	4.50	1.50	Fully Threaded	50,000	DIN 964, ISO 2010	25	000000000	00000




												M8 × 1.25 mm

												16	Standard	14.50	6.00	2.00	Fully Threaded	50,000	DIN 964, ISO 2010	10	000000000	0000


20												Standard	14.50	6.00	2.00	Fully Threaded	50,000	DIN 964, ISO 2010	10	000000000	0000
25	Standard											14.50	6.00	2.00	Fully Threaded	50,000	DIN 964, ISO 2010	10	000000000	00000
30	Standard											14.50	6.00	2.00	Fully Threaded	50,000	DIN 964, ISO 2010	10	000000000	00000