Filter by
System of Measurement
Fastener Head Type
Material
Drive Style
Oval Head Profile
Specifications Met
Threading
Hardness
Thread Spacing
Thread Type
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
Tensile Strength
Thread Fit
Thread Direction
About Rounded Head Screws
More
Metric Brass Slotted Oval Head Screws
Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance. These screws have a decorative, domed head that sits above the surface when installed. They’re angled under the head so they can be countersunk in a hole. Length is measured from the top of the bevel.
For technical drawings and 3-D models, click on a part number.
| Lg., mm | Threading | Head Dia., mm | Head Ht., mm | Oval Top Ht., mm | Tensile Strength, psi  | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||||
|---|---|---|---|---|---|---|---|---|---|
M3 × 0.5 mm | |||||||||
| 5 | Fully Threaded | 5.60 | 2.40 | 0.75 | 50,000 | DIN 964, ISO 2010 | 100 | 000000000 | 000000 |
| 6 | Fully Threaded | 5.60 | 2.40 | 0.75 | 50,000 | DIN 964, ISO 2010 | 100 | 000000000 | 00000 |
| 8 | Fully Threaded | 5.60 | 2.40 | 0.75 | 50,000 | DIN 964, ISO 2010 | 100 | 000000000 | 00000 |
| 10 | Fully Threaded | 5.60 | 2.40 | 0.75 | 50,000 | DIN 964, ISO 2010 | 100 | 000000000 | 00000 |
| 12 | Fully Threaded | 5.60 | 2.40 | 0.75 | 50,000 | DIN 964, ISO 2010 | 100 | 000000000 | 00000 |
M4 × 0.7 mm | |||||||||
| 6 | Fully Threaded | 7.50 | 3.20 | 1.00 | 50,000 | DIN 964, ISO 2010 | 100 | 000000000 | 00000 |
| 8 | Fully Threaded | 7.50 | 3.20 | 1.00 | 50,000 | DIN 964, ISO 2010 | 100 | 000000000 | 00000 |
| 10 | Fully Threaded | 7.50 | 3.20 | 1.00 | 50,000 | DIN 964, ISO 2010 | 100 | 000000000 | 00000 |
| 12 | Fully Threaded | 7.50 | 3.20 | 1.00 | 50,000 | DIN 964, ISO 2010 | 50 | 000000000 | 0000 |
| 16 | Fully Threaded | 7.50 | 3.20 | 1.00 | 50,000 | DIN 964, ISO 2010 | 50 | 000000000 | 0000 |
M5 × 0.8 mm | |||||||||
| 8 | Fully Threaded | 9.20 | 3.75 | 1.25 | 50,000 | DIN 964, ISO 2010 | 50 | 000000000 | 0000 |
| 10 | Fully Threaded | 9.20 | 3.75 | 1.25 | 50,000 | DIN 964, ISO 2010 | 50 | 000000000 | 0000 |
| 12 | Fully Threaded | 9.20 | 3.75 | 1.25 | 50,000 | DIN 964, ISO 2010 | 50 | 000000000 | 00000 |
| 16 | Fully Threaded | 9.20 | 3.75 | 1.25 | 50,000 | DIN 964, ISO 2010 | 50 | 000000000 | 00000 |
| 20 | Fully Threaded | 9.20 | 3.75 | 1.25 | 50,000 | DIN 964, ISO 2010 | 25 | 000000000 | 0000 |
M6 × 1 mm | |||||||||
| 12 | Fully Threaded | 11.00 | 4.50 | 1.50 | 50,000 | DIN 964, ISO 2010 | 25 | 000000000 | 0000 |
| 16 | Fully Threaded | 11.00 | 4.50 | 1.50 | 50,000 | DIN 964, ISO 2010 | 25 | 000000000 | 0000 |
| 20 | Fully Threaded | 11.00 | 4.50 | 1.50 | 50,000 | DIN 964, ISO 2010 | 25 | 000000000 | 00000 |
| 25 | Fully Threaded | 11.00 | 4.50 | 1.50 | 50,000 | DIN 964, ISO 2010 | 25 | 000000000 | 00000 |
| 30 | Fully Threaded | 11.00 | 4.50 | 1.50 | 50,000 | DIN 964, ISO 2010 | 25 | 000000000 | 00000 |
M8 × 1.25 mm | |||||||||
| 16 | Fully Threaded | 14.50 | 6.00 | 2.00 | 50,000 | DIN 964, ISO 2010 | 10 | 000000000 | 0000 |
| 20 | Fully Threaded | 14.50 | 6.00 | 2.00 | 50,000 | DIN 964, ISO 2010 | 10 | 000000000 | 0000 |
| 25 | Fully Threaded | 14.50 | 6.00 | 2.00 | 50,000 | DIN 964, ISO 2010 | 10 | 000000000 | 00000 |
| 30 | Fully Threaded | 14.50 | 6.00 | 2.00 | 50,000 | DIN 964, ISO 2010 | 10 | 000000000 | 00000 |