Filter by
Fastener Head Type
System of Measurement
Drive Style
Oval Head Profile
Material
Threading
Specifications Met
Thread Type
Finish
Thread Direction
Hardness
Thread Spacing
REACH
RoHS
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Thread Fit
Tensile Strength
About Rounded Head Screws
More
Metric Phillips Oval Head Screws
These screws have a decorative, domed head that sits above the surface when installed. They're angled under the head so they can be countersunk in a hole. Made from 18-8 stainless steel, they have good chemical resistance and are passivated for added protection against oxidation and corrosion. Screws may be mildly magnetic. Length is measured from the top of the bevel. DIN 966 is no longer an active specification and is superseded by ISO 7047. They are functionally equivalent with slight differences in head diameter and head height.
For technical drawings and 3-D models, click on a part number.
| Lg., mm | Threading | Head Dia., mm | Head Ht., mm | Oval Top Ht., mm | Drive Size | Tensile Strength, psi  | Specifications Met | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
M2.5 × 0.45 mm | ||||||||||
| 5 | Fully Threaded | 4.7 | 2.1 | 0.6 | No. 1 | 70,000 | DIN 966, ISO 7047 | 100 | 000000000 | 00000 |
| 6 | Fully Threaded | 4.7 | 2.1 | 0.6 | No. 1 | 70,000 | DIN 966, ISO 7047 | 100 | 000000000 | 00000 |
| 8 | Fully Threaded | 4.7 | 2.1 | 0.6 | No. 1 | 70,000 | DIN 966, ISO 7047 | 50 | 000000000 | 0000 |
| 10 | Fully Threaded | 4.7 | 2.1 | 0.6 | No. 1 | 70,000 | DIN 966, ISO 7047 | 50 | 000000000 | 0000 |
| 12 | Fully Threaded | 4.7 | 2.1 | 0.6 | No. 1 | 70,000 | DIN 966, ISO 7047 | 50 | 000000000 | 0000 |
M3 × 0.5 mm | ||||||||||
| 5 | Fully Threaded | 5.6 | 2.4 | 0.75 | No. 1 | 70,000 | DIN 966, ISO 7047 | 50 | 000000000 | 00000 |
| 6 | Fully Threaded | 5.6 | 2.4 | 0.75 | No. 1 | 70,000 | DIN 966, ISO 7047 | 100 | 000000000 | 0000 |
| 8 | Fully Threaded | 5.6 | 2.4 | 0.75 | No. 1 | 70,000 | DIN 966, ISO 7047 | 100 | 000000000 | 0000 |
| 10 | Fully Threaded | 5.6 | 2.4 | 0.75 | No. 1 | 70,000 | DIN 966, ISO 7047 | 100 | 000000000 | 0000 |
| 12 | Fully Threaded | 5.6 | 2.4 | 0.75 | No. 1 | 70,000 | DIN 966, ISO 7047 | 100 | 000000000 | 0000 |
| 16 | Fully Threaded | 5.6 | 2.4 | 0.75 | No. 1 | 70,000 | DIN 966, ISO 7047 | 100 | 000000000 | 0000 |
| 20 | Fully Threaded | 5.6 | 2.4 | 0.75 | No. 1 | 70,000 | DIN 966, ISO 7047 | 100 | 000000000 | 00000 |
M4 × 0.7 mm | ||||||||||
| 6 | Fully Threaded | 7.5 | 3.2 | 1 | No. 2 | 70,000 | DIN 966, ISO 7047 | 100 | 000000000 | 00000 |
| 8 | Fully Threaded | 7.5 | 3.2 | 1 | No. 2 | 70,000 | DIN 966, ISO 7047 | 100 | 000000000 | 0000 |
| 10 | Fully Threaded | 7.5 | 3.2 | 1 | No. 2 | 70,000 | DIN 966, ISO 7047 | 100 | 000000000 | 00000 |
| 12 | Fully Threaded | 7.5 | 3.2 | 1 | No. 2 | 70,000 | DIN 966, ISO 7047 | 100 | 000000000 | 00000 |
| 16 | Fully Threaded | 7.5 | 3.2 | 1 | No. 2 | 70,000 | DIN 966, ISO 7047 | 100 | 000000000 | 00000 |
| 20 | Fully Threaded | 7.5 | 3.2 | 1 | No. 2 | 70,000 | DIN 966, ISO 7047 | 100 | 000000000 | 00000 |
| 25 | Fully Threaded | 7.5 | 3.2 | 1 | No. 2 | 70,000 | DIN 966, ISO 7047 | 50 | 000000000 | 00000 |
| 30 | Fully Threaded | 7.5 | 3.2 | 1 | No. 2 | 70,000 | DIN 966, ISO 7047 | 25 | 000000000 | 0000 |
M5 × 0.8 mm | ||||||||||
| 8 | Fully Threaded | 9.2 | 3.75 | 1.25 | No. 2 | 70,000 | DIN 966, ISO 7047 | 100 | 000000000 | 00000 |
| 10 | Fully Threaded | 9.2 | 3.75 | 1.25 | No. 2 | 70,000 | DIN 966, ISO 7047 | 100 | 000000000 | 00000 |
| 12 | Fully Threaded | 9.2 | 3.75 | 1.25 | No. 2 | 70,000 | DIN 966, ISO 7047 | 50 | 000000000 | 00000 |
| 16 | Fully Threaded | 9.2 | 3.75 | 1.25 | No. 2 | 70,000 | DIN 966, ISO 7047 | 50 | 000000000 | 00000 |
| 20 | Fully Threaded | 9.2 | 3.75 | 1.25 | No. 2 | 70,000 | DIN 966, ISO 7047 | 50 | 000000000 | 00000 |
| 25 | Fully Threaded | 9.2 | 3.75 | 1.25 | No. 2 | 70,000 | DIN 966, ISO 7047 | 50 | 000000000 | 00000 |
| 30 | Fully Threaded | 9.2 | 3.75 | 1.25 | No. 2 | 70,000 | DIN 966, ISO 7047 | 25 | 000000000 | 0000 |
| 35 | Fully Threaded | 9.2 | 3.75 | 1.25 | No. 2 | 70,000 | DIN 966, ISO 7047 | 25 | 000000000 | 00000 |
M6 × 1 mm | ||||||||||
| 10 | Fully Threaded | 11 | 4.5 | 1.5 | No. 3 | 70,000 | DIN 966, ISO 7047 | 50 | 000000000 | 00000 |
| 12 | Fully Threaded | 11 | 4.5 | 1.5 | No. 3 | 70,000 | DIN 966, ISO 7047 | 50 | 000000000 | 00000 |
| 16 | Fully Threaded | 11 | 4.5 | 1.5 | No. 3 | 70,000 | DIN 966, ISO 7047 | 50 | 000000000 | 00000 |
| 20 | Fully Threaded | 11 | 4.5 | 1.5 | No. 3 | 70,000 | DIN 966, ISO 7047 | 25 | 000000000 | 00000 |
| 25 | Fully Threaded | 11 | 4.5 | 1.5 | No. 3 | 70,000 | DIN 966, ISO 7047 | 25 | 000000000 | 00000 |
| 30 | Fully Threaded | 11 | 4.5 | 1.5 | No. 3 | 70,000 | DIN 966, ISO 7047 | 25 | 000000000 | 0000 |
| 35 | Fully Threaded | 11 | 4.5 | 1.5 | No. 3 | 70,000 | DIN 966, ISO 7047 | 25 | 000000000 | 0000 |
M8 × 1.25 mm | ||||||||||
| 16 | Fully Threaded | 14.5 | 6 | 2 | No. 3 | 70,000 | DIN 966, ISO 7047 | 10 | 000000000 | 0000 |
| 20 | Fully Threaded | 14.5 | 6 | 2 | No. 4 | 70,000 | DIN 966, ISO 7047 | 25 | 000000000 | 00000 |
| 25 | Fully Threaded | 14.5 | 6 | 2 | No. 4 | 70,000 | DIN 966, ISO 7047 | 25 | 000000000 | 00000 |
| 30 | Fully Threaded | 14.5 | 6 | 2 | No. 4 | 70,000 | DIN 966, ISO 7047 | 10 | 000000000 | 00000 |