JCIS 10-70 Screws | McMaster-Carr

Filter by

System of Measurement

Thread Size

Length

Head Height

Head Diameter

Drive Style

Fastener Head Type

Flat Head Profile

Rounded Head Style

Thread Pitch

Thread Type

Countersink Angle

Threading

Specifications Met

Federal Specification

Thread Spacing

Finish

Material

Tip Type

Thread Direction

Hardness

Thread Fit

DFARS Specialty Metals

Exempt

REACH

Not Compliant

Export Control Classification Number (ECCN)

RoHS

Drive Size

25 Products

JIS Steel Flat Head Screws

These screws are manufactured to meet Japanese Industrial Standards. Similar in appearance to Phillips, the JIS drive has a shallower opening with sharper angles and straighter internal walls. This lets them withstand more torque while preventing the driver from slipping and damaging the drive. Tighten them only with a JIS driver to avoid stripping the drive. Some JIS screws are marked with a dot near the drive for quick identification.

Length is measured from the top of the head.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

				Head, mm
	Lg., mm	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				M1.6 × 0.35 mm

				2	90°	Standard	2.4	0.5	Fully Threaded	60,000	JCIS 10-70	25	000000000	00000


				3	90°	Standard	2.4	0.5	Fully Threaded	60,000	JCIS 10-70	25	000000000	0000
				4	90°	Standard	2.4	0.5	Fully Threaded	60,000	JCIS 10-70	25	000000000	0000
				5	90°	Standard	2.4	0.5	Fully Threaded	60,000	JCIS 10-70	25	000000000	0000
				6	90°	Standard	2.4	0.5	Fully Threaded	60,000	JCIS 10-70	25	000000000	0000




						M1.7 × 0.35 mm

						2	90°	Standard	2.5	0.5	Fully Threaded	60,000	JCIS 10-70	25	000000000	0000


						3	90°	Standard	2.5	0.5	Fully Threaded	60,000	JCIS 10-70	25	000000000	0000
						4	90°	Standard	2.5	0.5	Fully Threaded	60,000	JCIS 10-70	25	000000000	0000
						5	90°	Standard	2.5	0.5	Fully Threaded	60,000	JCIS 10-70	25	000000000	0000
						6	90°	Standard	2.5	0.5	Fully Threaded	60,000	JCIS 10-70	25	000000000	0000




								M2 × 0.4 mm

								3	90°	Standard	3	0.6	Fully Threaded	60,000	JCIS 10-70	25	000000000	0000


								4	90°	Standard	3	0.6	Fully Threaded	60,000	JCIS 10-70	25	000000000	0000
								5	90°	Standard	3	0.6	Fully Threaded	60,000	JCIS 10-70	25	000000000	0000
								6	90°	Standard	3	0.6	Fully Threaded	60,000	JCIS 10-70	25	000000000	0000
								8	90°	Standard	3	0.6	Fully Threaded	60,000	JCIS 10-70	25	000000000	0000

JIS Steel Pan Head Screws

Length is measured from under the head.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

		Head, mm
	Lg., mm	Dia.	Ht.	Threading	Tensile Strength	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				M1.6 × 0.35 mm

				2	2.3	0.5	Fully Threaded	Not Rated	JCIS 10-70	25	000000000	00000


				3	2.3	0.5	Fully Threaded	Not Rated	JCIS 10-70	25	000000000	0000
				4	2.3	0.5	Fully Threaded	Not Rated	JCIS 10-70	25	000000000	0000
				5	2.3	0.5	Fully Threaded	Not Rated	JCIS 10-70	25	000000000	0000
				6	2.3	0.5	Fully Threaded	Not Rated	JCIS 10-70	25	000000000	0000




						M1.7 × 0.35 mm

						2	2.5	0.5	Fully Threaded	Not Rated	JCIS 10-70	25	000000000	0000


						3	2.5	0.5	Fully Threaded	Not Rated	JCIS 10-70	25	000000000	0000
						4	2.5	0.5	Fully Threaded	Not Rated	JCIS 10-70	25	000000000	0000
						5	2.5	0.5	Fully Threaded	Not Rated	JCIS 10-70	25	000000000	0000
						6	2.5	0.5	Fully Threaded	Not Rated	JCIS 10-70	25	000000000	0000