McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    78 Products
    About Drill Bits
    industrial info icon

    Compare material, finish, length class, and decimal size equivalents.

    Carbide-Tipped Drill Bits for Masonry and Concrete

    Crush rather than cut material so bits don’t jam or overheat while drilling masonry and concrete. The ultra-hard carbide tip breaks masonry into pieces and the widely spaced flutes channel them out of the hole. These bits stay sharp, resisting wear and heat that will dull or break other bits.
    SDS-Max Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits for Masonry and Concrete, SDS-Max Shank for Hammer and Rotary Drilling.
    Image of Specification. SDS-Max Shank. Front orientation. SDS Max Shank.

    SDS-Max

    Shank

    The slotted shank is compatible with SDS-Max-drive rotary hammers. These bits use simultaneous rotary and hammering action to penetrate material. Also known as percussion or impact bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Specs. Met
    Mfr.
    Each
    Uncoated
     
    Standard Point
    3/8"
    		0.375"
    		10"4"ANSI B212.15Relton88705A1000000
    3/8"
    		0.375"
    		14"8"ANSI B212.15Relton88705A4200000
    3/8"
    		0.375"
    		18"12"ANSI B212.15Relton88705A4300000
    7/16"
    		0.4375"
    		14"8"ANSI B212.15Relton88705A4400000
    1/2"
    		0.5"
    		14"8"ANSI B212.15Relton88705A1100000
    1/2"
    		0.5"
    		18"12"ANSI B212.15Relton88705A200000
    1/2"
    		0.5"
    		22"16"ANSI B212.15Relton88705A1200000
    1/2"
    		0.5"
    		28"22"ANSI B212.15Relton88705A4500000
    9/16"
    		0.5625"
    		14"8"ANSI B212.15Relton88705A1300000
    11/16"
    		0.6875"
    		14"8"ANSI B212.15Relton88705A300000
     
    Multipoint
    5/8"
    		0.625"
    		14"8"ANSI B212.15Relton88705A1500000
    5/8"
    		0.625"
    		18"12"ANSI B212.15Relton88705A4600000
    5/8"
    		0.625"
    		22"16"ANSI B212.15Relton88705A1600000
    5/8"
    		0.625"
    		42"36"ANSI B212.15Relton88705A47000000
    3/4"
    		0.75"
    		14"8"ANSI B212.15Relton88705A1900000
    3/4"
    		0.75"
    		18"12"ANSI B212.15Relton88705A4800000
    3/4"
    		0.75"
    		22"16"ANSI B212.15Relton88705A2100000
    3/4"
    		0.75"
    		42"36"ANSI B212.15Relton88705A22000000
    3/4"
    		0.75"
    		54"48"ANSI B212.15Relton2630N17000000
    3/4"
    		0.75"
    		66"60"ANSI B212.15Relton2630N18000000
    7/8"
    		0.875"
    		14"8"ANSI B212.15Relton88705A2500000
    7/8"
    		0.875"
    		18"12"ANSI B212.15Relton88705A5100000
    7/8"
    		0.875"
    		22"16"ANSI B212.15Relton88705A2600000
    7/8"
    		0.875"
    		42"36"ANSI B212.15Relton88705A52000000
    1"
    		1"
    		14"8"ANSI B212.15Relton88705A2700000
    1"
    		1"
    		18"12"ANSI B212.15Relton88705A5300000
    1"
    		1"
    		22"16"ANSI B212.15Relton88705A28000000
    1"
    		1"
    		42"36"ANSI B212.15Relton88705A54000000
    1 1/8"
    		1.125"
    		14"8"ANSI B212.15Relton88705A3200000
    1 1/8"
    		1.125"
    		22"16"ANSI B212.15Relton88705A33000000
    1 1/8"
    		1.125"
    		42"36"ANSI B212.15Relton88705A55000000
    1 1/4"
    		1.25"
    		14"8"ANSI B212.15Relton88705A34000000
    1 1/4"
    		1.25"
    		22"16"ANSI B212.15Relton88705A35000000
    1 3/8"
    		1.375"
    		22"16"ANSI B212.15Relton88705A38000000
    1 1/2"
    		1.5"
    		22"16"ANSI B212.15Relton88705A41000000
    1 1/2"
    		1.5"
    		42"36"ANSI B212.15Relton88705A56000000
     

    Dust-Collecting Carbide-Tipped Drill Bits for Masonry and Concrete

    Connect these hollow bits to a vacuum system, and they'll suck up dust while drilling. Use them to meet OSHA standards for silica dust exposure when drilling in concrete, brick, and other powdery masonry material. These bits are especially useful for cutting holes for adhesive anchors—you don't need to clean out the hole before installing. They have a titanium nitride (TiN)-coated carbide tip that resists wear and heat to stay sharp.
    SDS-Max Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Contains Inset. Drill Bits. Dust-Collecting Carbide-Tipped Drill Bits for Masonry and Concrete, SDS-Max Shank for Hammer and Rotary Drilling.
    Image of Specification. SDS-Max Shank. Front orientation. SDS Max Shank.

    SDS-Max

    Shank

    The slotted shank is compatible with SDS-Max-drive rotary hammers. These bits use simultaneous rotary and hammering action to penetrate material. Also known as percussion or impact bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    For Vacuum
    Hose ID
    Mfr.
    Each
    Titanium Nitride (TiN) Coated
     
    Standard Point
    3/4"
    		0.75"
    		21"12 1/2"1 3/8"Bosch2656N10000000
    13/16"
    		0.8125"
    		25"15"1 3/8"Bosch2656N3000000
    7/8"
    		0.875"
    		25"15"1 3/8"Bosch2656N2000000
    1"
    		1"
    		27"17 1/2"1 3/8"Bosch2656N4000000
    1 1/8"
    		1.125"
    		29"20"1 3/8"Bosch2656N5000000
    1 3/8"
    		1.375"
    		35"25"1 3/8"Bosch2656N6000000
     

    Drill Bit Shank Adapters for Rotary Hammers

    Image of Product. For SDS-Plus-Shank Drill Bits and SDS Max Shanks. Front orientation. Drill Bit Shank Adapters. Drill Bit Shank Adapters for Rotary Hammers, For SDS-plus-Shank Drill Bits, SDS Max Shank.
    Image of Product. For Spline-Shank Drill Bits and SDS Max Shanks. Front orientation. Drill Bit Shank Adapters. Drill Bit Shank Adapters for Rotary Hammers, For Spline-Shank Drill Bits, SDS Max Shank.

    For SDS-Plus-Shank Drill

    Bits and SDS Max Shanks

    For Spline-Shank Drill

    Bits and SDS Max Shanks

    Adapt your rotary hammer to fit a variety of masonry drill bit shank types. Made of steel, these adapters withstand the repeated high-impact loads of hammer drilling. Adapters for tapered round bits include a bit removal tool for easy bit changes.
    For Drill Bit
    Shank Type
    Shank
    Type
    Overall
    Lg.
    Material
    Each
    SDS Plus
    		SDS Max8"Steel
    		89385A320000000
    Spline
    		SDS Max10 3/4"Steel
    		89385A34000000

    Carbide-Tipped Core Drill Bits for Masonry and Concrete

    Remove a core of material with these hollow bits to make larger holes than fluted masonry bits. They're often used for installing pipe and conduit through brick and concrete. The carbide tip resists wear and heat to stay sharp.
    SDS-Max Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Core Drill Bits for Masonry and Concrete, SDS-Max Shank for Hammer and Rotary Drilling.
    Image of Specification. SDS-Max Shank. Front orientation. SDS Max Shank.

    SDS-Max

    Shank

    The slotted shank is compatible with SDS-Max-drive rotary hammers. These bits use simultaneous rotary and hammering action to penetrate material. Also known as percussion or impact bits.
    Pilot Drills—Cut a groove before drilling to make starting the hole easier.
    Drill Bits
    Pilot Drills
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Specs. Met
    Includes
    Mfr.
    Each
    Each
    Uncoated
     
    Standard Point
    1 3/4"
    		1.75"
    		22"17"ANSI B212.15Core Ejector Key, Pilot DrillBosch88865A22000000088865A97000000
    2"
    		2"
    		12"7"ANSI B212.15Core Ejector Key, Pilot DrillBosch88865A6300000088865A9700000
    2"
    		2"
    		22"17"ANSI B212.15Core Ejector Key, Pilot DrillBosch88865A6400000088865A9700000
    2 5/8"
    		2.625"
    		12"7"ANSI B212.15Core Ejector Key, Pilot DrillBosch88865A2300000088865A9700000
    2 5/8"
    		2.625"
    		22"17"ANSI B212.15Core Ejector Key, Pilot DrillBosch88865A2400000088865A9700000
    3 1/4"
    		3.25"
    		12"7"ANSI B212.15Core Ejector Key, Pilot DrillBosch88865A2500000088865A9700000
    3 1/4"
    		3.25"
    		22"17"ANSI B212.15Core Ejector Key, Pilot DrillBosch88865A2600000088865A9700000
    3 9/16"
    		3.5625"
    		12"7"ANSI B212.15Core Ejector Key, Pilot DrillBosch88865A7900000088865A9700000
    4"
    		4"
    		22"17"ANSI B212.15Core Ejector Key, Pilot DrillBosch88865A7600000088865A9700000
    5"
    		5"
    		22"17"ANSI B212.15Core Ejector Key, Pilot DrillBosch88865A7400000088865A9700000
     

    Changeable-Size Carbide-Tipped Core Drill Bits for Masonry and Concrete

    Instead of investing in multiple bits, change the bit body to drill a different-sized hole. These hollow bits remove a large core of material from concrete, brick, and masonry for installing pipe and conduit. The carbide tip resists wear and heat to stay sharp. Bits include a pilot drill to make starting holes easier.
    SDS-Max Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Changeable-Size Carbide-Tipped Core Drill Bits for Masonry and Concrete, SDS-Max Shank for Hammer and Rotary Drilling.
    Image of Specification. SDS-Max Shank. Front orientation. SDS Max Shank.

    SDS-Max

    Shank

    The slotted shank is compatible with SDS-Max-drive rotary hammers. These bits use simultaneous rotary and hammering action to penetrate material. Also known as percussion or impact bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Specs. Met
    Includes
    Mfr.
    Each
    Uncoated
     
    Standard Point
    1 1/2"
    		1.5"
    		17"12"ANSI B212.15Pilot DrillTru-Cut3084A9140000000
    1 3/4"
    		1.75"
    		17"12"ANSI B212.15Pilot DrillTru-Cut3084A915000000
    2"
    		2"
    		17"12"ANSI B212.15Pilot DrillTru-Cut3084A916000000
    2 1/2"
    		2.5"
    		17"12"ANSI B212.15Pilot DrillTru-Cut3084A917000000
    3"
    		3"
    		17"12"ANSI B212.15Pilot DrillTru-Cut3084A918000000
    3 1/2"
    		3.5"
    		17"12"ANSI B212.15Pilot DrillTru-Cut3084A919000000
    4"
    		4"
    		17"12"ANSI B212.15Pilot DrillTru-Cut3084A921000000
    4 1/2"
    		4.5"
    		17"12"ANSI B212.15Pilot DrillTru-Cut3084A922000000
    5"
    		5"
    		17"12"ANSI B212.15Pilot DrillTru-Cut3084A923000000
     
    Accessories and Replacements for Drill Bits
    Changeable Bit Bodies
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Component
    Specs. Met
    Each
    Uncoated Carbide-Tipped Steel
    1 1/2"
    		1.5"
    		5"Bit BodyANSI B212.153084A430000000
    1 3/4"
    		1.75"
    		5"Bit BodyANSI B212.153084A44000000
    2"
    		2"
    		5"Bit BodyANSI B212.153084A45000000
    2 1/2"
    		2.5"
    		5"Bit BodyANSI B212.153084A46000000
    3"
    		3"
    		5"Bit BodyANSI B212.153084A47000000
    3 1/2"
    		3.5"
    		5"Bit BodyANSI B212.153084A48000000
    4"
    		4"
    		5"Bit BodyANSI B212.153084A49000000
    4 1/2"
    		4.5"
    		5"Bit BodyANSI B212.153084A56000000
    5"
    		5"
    		5"Bit BodyANSI B212.153084A57000000
     
    Extensions, Replacement Shanks and Replacement Pilot Drills
    Each
    6" Overall Length Extension3084A59000000
    12" Overall Length Extension3084A6300000
    18" Overall Length Extension3084A64000000
    SDS-Max Shank3084A12100000
    Pilot Drill for Changeable-Size Masonry Core Drill Bit3084A5800000
    back to top