These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

This sealant includes a material certificate with traceable lot number, test report, and product shelf life.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Thinner than non-sagging sealants, this sealant flows easily into cracks and has a smooth finish.

Make temporary waterproof seals that peel off when no longer needed.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Adjust air-flow for precise control and smooth material flow—these guns have a built-in pressure regulator with a control knob.

These flexible extensions add length and bend 180° to get into hard-to-reach areas.

Minimize mess and waste—when you release the handle on these guns, the rod retracts a bit to stop flow automatically.

Create a slippery surface that keeps sealant from smearing or widening when smoothed.

Use color to identify water, gas, and chemical connections.

Wind this multifilament cord into the grooves of tapered pipe threads to quickly create a seal.

Completely free of oil and chemically inert, these sealants are safe to use with wet and dry oxygen systems.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

Remaining pliable over time, these high-temperature sealants protect against leaks caused by vibration and pressure—they naturally fill voids before leaks can develop.

Much thicker than sealants for fine threads, these sealants bridge the gaps between coarse threads.

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start.

Apply this thread sealant stick without a mess.

Formulated to flow into small spaces, use these sealants between fine threads.

Seal joints and gaps in concrete.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

The textured finish matches concrete surfaces.

Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing.

Make seals that support glass under heavy loads in equipment and buildings.

Seal glass windows in metal and wood fire-rated doors.

Apply remover to debond sealant from surfaces and clean it off of work areas and tools.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Seal metal-to-metal joints in ductwork.

Repair worn and torn rubber parts. These two-part fillers are self leveling and form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps.

Spray these surface fillers on molded plastic parts that have surface blemishes, scratches, and mold lines. Use with ABS, polystyrene, and glass-filled nylon.

For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.

Stop leaks in metal tanks and equipment without draining the contents. Until a permanent repair can be made, rub these sticks into the leak to form a temporary seal.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.

Repair stripped threads on female connections, such as oil pans, valve covers, and distributor caps.

Cut rope to the length you need, pack it in cracks up to 1" wide, and heat with a propane torch.

Fill and conceal small cracks, nail holes, and blemishes. Compounds are ready to use.

Spray these compounds onto drywall to create an orange-peel texture that covers stains, patches, and chips. The nozzle adjusts from a light to heavy spray.

Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.

Mend rips, tears, and holes on vinyl surfaces, such as awnings and upholstery, with these flexible, waterproof surface fillers.

Press these putty-like fillers into cracks in wood up to 1/8" wide.

An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.

Repair small leaks and cracks in coolant tanks for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems.

Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.

Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.

Able to withstand temperatures up to 2300° F, these ceramic surface fillers are often used as thermal insulation on brick, mortar, burner blocks, furnace holders, and thermocouples.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Used for brick, block, and stone laying as well as for repairing masonry, mortar mixes consist of fine sand and masonry cement.