Stick these gaskets around door and vent cutouts, or replace worn seals to maintain your enclosure's NEMA rating. The adhesive backing holds them in place.

Bonds to itself for a permanent, watertight seal. This tape has no adhesive, so it won't dry out and crack, which can cause standard tape to fail over time. The rubber backing molds to irregular surfaces and withstands demanding conditions, making this tape a good choice for patching and sealing anything from roofs to pipes.

These coatings protect circuit boards and other electronics from moisture, dust, and static. They’re thinner than potting compounds, so they flow into the smallest contours of your components to cover them completely. Apply these coatings without needing a potting box or other container. You can remove them if necessary.

Often used to create gaskets in ovens and applications where fire is a concern, these gasket makers meet UL 94 V-0 for flame retardance and withstand temperatures up to 500° F. They replace rubber and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets. Push the plunger to precisely dispense small amounts.

Rated UL 94 for flame retardance, these epoxies self-extinguish within 10 seconds. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Protect circuit boards and other electronics from fire and heat. These self-extinguishing compounds meet UL 94V-0 for flame retardance and withstand temperatures up to nearly 400° F. Use them to shield components from dust, moisture, chemicals, mechanical shock, and vibration. Since they’re epoxies, they won’t break down from chemicals or moisture. They’re also excellent electrical insulators. These compounds have the consistency of honey once they’re mixed, so they seep into crevices to encase intricate components.

Hide proprietary information on electrical components while also protecting them from moisture, dust, and static. All it takes is a single thin layer of these black coatings. They’re often used to protect custom parts while prototyping. Place them under a UV curing lamp to fully harden them in just 5 seconds. Made of urethane rubber, they resist chemicals and scratches and won’t crack in low temperatures. That means they’re great for harsh environments. These coatings meet UL 94 V-0 for flame retardance.

These coatings are thinner than potting compounds, so they flow into the smallest contours to cover your parts completely. They also don’t require a potting box or other container. Dispense these coatings with a gun (sold separately).

Even in furnace-like heat, these coatings protect your electronics from moisture, dust, and static. They withstand temperatures up to 270° higher than standard silicone rubber coatings while remaining flexible enough to not crack and peel from vibration. Whether your circuit board is in a hot, humid shop or inside heavy machinery that heats up and vibrates, these coatings keep it protected. Made of silicone, they won’t cloud from humidity.

They’re thinner than potting compounds, so they flow into the smallest contours of your components to cover them completely. Simply spray these coatings on your device without needing a potting box or other container. They contain a UV indicator, so you can use a blacklight to check if they’ve been applied evenly. You can remove these coatings if necessary.

These coatings are IPC certified for use with circuit boards. For flame retardance, they meet UL 94 V-0.

Protect LEDs, solar cells, and fiber optics with a coating that’s clear enough to see through. These coatings let optimal light pass through and repel dust and moisture, so they won’t distort your view of what’s underneath. Made of silicone rubber, they won’t cloud in hot, humid environments. That means they’re great for use outdoors, such as on signs and instrumentation panels. These coatings are thinner than potting compounds, flowing into the smallest contours on your device to cover it completely. Silicone rubber conformal coatings are the most flexible kind of conformal coating, so they won’t crack or peel from vibration. To protect sensitive equipment, these coatings also prevent static discharge.

Simply spray these coatings on your device without needing a potting box or other container. Since they cure at room temperature, you won’t need UV lights or cure ovens either. You can remove them if necessary.

These coatings are IPC certified for use with circuit boards. They also meet UL 94 V-0 for flame retardance.