These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Tested to meet ASTM E595, a standard used by NASA, these sealants fill joints and seams while releasing almost no volatile emissions that could damage sensitive electronics, even in a vacuum.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene.

Form bonds in 5 seconds or less.

Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

Form bonds without the strong odor of other instant-bond adhesives.

For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives.

These adhesives withstand temperatures up to 480° F.

These thin liquids, also known as super glue, flow into small gaps.

Bond plastics, porous materials, or dirty surfaces.

These super glues are blended with rubber for better impact and moisture resistance than other instant-bond adhesives.

For flexible bonds that resist cracking, these adhesives stay pliable.

For easy positioning, these adhesives begin to harden only when exposed to light.

For quick repairs, these epoxies begin to harden in 6 minutes or less.

Even when used under water, these adhesives maintain their strength.

These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.

For invisible bond lines, these adhesives dry clear.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.

Bond most materials without the strong odor of other epoxy adhesives.

With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.

Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.

With excellent shear strength, these acrylics form bonds at least 25% stronger than standard acrylic structural adhesives.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives.

Bond and repair nosing and stair treads with this thick, two-part epoxy.

Install building materials such as wood and drywall with these general purpose adhesives.

Apply this glue-like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape.

Attach EMI/RFI shields and gaskets to electronics housings—these rolls are loaded with conductive fibers.

Also known as Gorilla Glue, this glue expands to form stronger bonds than other glue.

The polyurethane glue in these cartridges has nearly twice the shear strength of other hot-melt adhesives.

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.