About Sealant Flexibility
More
About Structural Adhesives
More
Noncorrosive Silicone Sealants
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Sealants that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Cannot Be Sold To | Choose a Color | Each | |
Dow Corning Silicone | |||||||||||||
| 737 | 3 | Tube | 5 min. | 24 hrs. | 300% | -25% to 25% | Soft (Durometer 30A) | -85° to 350° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Composites Composites to Glass Glass | __ | Clear | 0000000 | 000000 |
| 737 | 10.1 | Cartridge | 3 min. | 24 hrs. | 300% | -25% to 25% | Soft (Durometer 30A) | -85° to 350° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Composites Composites to Glass Glass | __ | 000000 | 00000 | |
Loctite® Silicone | |||||||||||||
| SI 5011 CL | 2.7 | Tube | 20 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 20A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | __ | Clear | 0000000 | 00000 |
| SI 5011 CL | 10.1 | Cartridge | 20 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 20A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | __ | Clear | 0000000 | 00000 |
| SI 5109 | 10.1 | Cartridge | 60 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 15A) | -75° to 600° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | __ | Red | 0000000 | 00000 |
Permatex Silicone | |||||||||||||
| 81173 | 12.9 | Cartridge | 30 min. | 24 hrs. | 350% | Not Rated | Soft (Durometer 15A) | -75° to 450° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | Black | 0000000 | 00000 |
| Primer for Dow Corning 737 and 739 Sealants (16 fl. oz. Bottle) | 0000000 | Each | 000000 |
Sealants
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi  | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | ||
Sika Sikaflex Hybrid Polymer | ||||||||||||||
| 505 UV | 10.1 | Cartridge | 30 min. | 7 days | 275% | Not Rated | 225 | Medium (Durometer 45A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Composites Composites to Glass Glass Masonry Wood Wood to Glass | White | 0000000 | 000000 | 00 |
Each | ||||||||||||||
| 1-11 | 12-Up | |||||||||||||
Hybrid Polymer | ||||||||||||||
| __ | 10.1 | Cartridge | 20 min. | 24 hrs. | 250% | -25% to 25% | 225 | Soft (Durometer 25A) | -75° to 250° | Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry | Clear | 0000000 | 00000 | 000000 |
Polyurethane | ||||||||||||||
| __ | 10.1 | Cartridge | 3 hrs. | 24 hrs. | 880% | -25% to 25% | 200 | Medium (Durometer 45A) | -20° to 150° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Rubber Rubber to Composites Asphalt Composites Masonry Wood | 0000000 | 0000 | 0000 | |
Structural Sealants
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
3M Hybrid Polymer | ||||||||||||
| 760 UV | 9.8 | Cartridge | 30 min. | 24 hrs. | 100% | Not Rated | Medium Hard (Durometer 55A) | -40° to 212° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | 00000000 | 000000 | |
| 760 UV | 20.3 | Sausage Pack | 30 min. | 24 hrs. | 100% | Not Rated | Medium Hard (Durometer 55A) | -40° to 212° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | 00000000 | 00000 | |
3M Polyurethane | ||||||||||||
| 540 | 20.3 | Sausage Pack | 90 min. | 24 hrs. | 600% | -25% to 25% | Medium Soft (Durometer 40A) | -40° to 190° | Metal Plastic Rubber Composites Wood | 00000000 | 00000 | |
| 551 | 20.3 | Sausage Pack | 180 min. | 24 hrs. | 600% | Not Rated | Medium (Durometer 45A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | White | 00000000 | 00000 |
| 560 | 20.3 | Sausage Pack | 60 min. | 24 hrs. | 300% | Not Rated | Medium Hard (Durometer 55A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | 00000000 | 00000 | |
Loctite® Hybrid Polymer | ||||||||||||
| 5510 | 10.1 | Cartridge | 24 hrs. | 7 days | 140% | Not Rated | Medium Soft (Durometer 44A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | Clear | 0000000 | 00000 |
| 5510 | 10.1 | Cartridge | 24 hrs. | 7 days | 140% | Not Rated | Medium Soft (Durometer 44A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | Gray | 00000000 | 00000 |
| 5510 | 10.1 | Cartridge | 24 hrs. | 7 days | 320% | Not Rated | Medium Soft (Durometer 35A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | White | 00000000 | 00000 |
Sika Sikaflex Polyurethane | ||||||||||||
| 1-A | 10.1 | Cartridge | 6 hrs. | 7 days | 550% | -35% to 35% | Medium Soft (Durometer 35A) | -40° to 170° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | 0000000 | 00000 | |
| 1-A | 20 | Sausage Pack | 6 hrs. | 7 days | 550% | -35% to 35% | Medium Soft (Durometer 35A) | -40° to 170° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | Limestone | 00000000 | 00000 |
| 15LM | 10.1 | Cartridge | 6 hrs. | 7 days | 700% | -50% to 100% | Soft (Durometer 20A) | -40° to 170° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | 00000000 | 00000 | |
| Primer for Sika Sikaflex Sealants (3.4-oz Bottle) | 0000000 | Each | 000000 |
All-Weather Application Structural Sealants
Apply these sealants in cold temperatures, on wet surfaces, and even through running water. They are structural sealants that combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
Polyether | ||||||||||||
| 5 fl. oz. | Tube | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | White | 000000 | 00000 |
| 10.1 fl. oz. | Cartridge | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 0000000 | 00000 | |
| 20 fl. oz. | Sausage Pack | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 00000 | |
| 28 fl. oz. | Cartridge | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 00000 | |
| 2 gal. | Pail | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 000000 | |
| 5 gal. | Pail | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 000000 | |
Self-Leveling Oil- and Fuel-Resistant Sealants
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint expansion/compression tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint expansion/compression tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Sealants that cannot be sold to California exceed local regulatory limits on VOC (volatile organic compounds).
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Cannot Be Sold To | Each | |
Buna-N | |||||||||||||
| 4 | Tube | 10 min. | 24 hrs. | 1,000% | Not Rated | Not Rated | Soft (Durometer 25A) | -30° to 300° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | 0000000 | 00000 | |
| 10.3 | Cartridge | 10 min. | 24 hrs. | 600% | Not Rated | Not Rated | Soft (Durometer 30A) | -30° to 300° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | 0000000 | 0000 | |
Epoxy Structural Adhesives
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP110, 14310, 14260, and 305-1/2 bond dissimilar materials.
305-1/2 and 310A/B are solvent-free.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| 305-1/2 | 1.69 | Cartridge | 60 min. | 48 hrs. | 2,240 | 84 | 1:1 | Thick Liquid (23,250 cP) | -30° to 250° | Blue | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Composites, Glass, Wood, Wood to Glass | 00000000 | 000000 |
Epoxy Structural Adhesives for Harsh Environments
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions. Epoxies are the strongest structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
Adhesives | |||||||||||||
| 1.69 fl. oz. | Cartridge | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (7,000 cP) | -50° to 350° | Amber | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Rubber, Rubber to Composites, Composites | 000000 | 000000 |
Epoxy Structural Adhesives for Hard-to-Bond Materials
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives. They bond dissimilar materials. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| 1.69 | Cartridge | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (9,000 cP) | -50° to 350° | Amber | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Ceramic, Composites, Glass, Wood, Wood to Glass | 000000 | 000000 |
| 48 | Bottle | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (9,000 cP) | -50° to 350° | Amber | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Ceramic, Composites, Glass, Wood, Wood to Glass | 000000 | 000000 |
Urethane Structural Adhesives
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
The size listed is the combined total of the two parts. Dispense adhesives in 10.1 fl. oz. cartridges with a standard caulk gun.
5570 is also known as silane modified polymer.
Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| 5570 | 10.1 | Cartridge | 30 min. | 7 days | 400 | Not Rated | Paste (Not Rated) | -40° to 200° | White | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Glass, Rubber to Masonry, Composites, Glass, Masonry, Wood, Wood to Glass | 00000000 | 000000 |
Mfr. Model | Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| Plastic Bonder | 50139 | 0.85 | Syringe | 15 min. | 30 min. | 1,000 | Not Rated | 1:1 | Thick Liquid (50,000 cP) | -20° to 250° | Black | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry, Wood | 000000 | 00000 |
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Pkg. Qty. | Pkg. | |
| 0.1 oz. | One-Time-Use Packet | 8 min. | 18 hrs. | 400 | Not Rated | 1:1 | Thick Liquid (4,000 cP) | -40° to 150° | Clear | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Composites, Glass | 10 | 0000000 | 000000 |
High-Strength Urethane Structural Adhesives
With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives. Urethanes are the most flexible adhesives, so they bond dissimilar materials and damp vibration.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| DP620NS | 1.64 | Cartridge | 20 min. | 48 hrs. | 1,700 | 30 | 1:1 | Thick Liquid (4,360 cP) | -60° to 250° | Black | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Rubber, Rubber to Composites, Composites, Wood | 00000000 | 000000 |
| DP640 | 1.64 | Cartridge | 40 min. | 7 days | 1,960 | 64 | 1:1 | Thick Liquid (30,000 cP) | -65° to 250° | Brown | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry, Wood | 0000000 | 00000 |
Mfr. Model | Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| Dev-Thane 5 | 14503 | 1.69 | Cartridge | 45 min. | 4 hrs. | 1,840 | 65 | 1:1 | Thick Liquid (45,000 cP) | -40° to 200° | Gray | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Plastic to Masonry, Rubber, Rubber to Composites, Masonry, Wood | 00000000 | 000000 |
Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| 1.65 | Syringe | 4 min. | 24 hrs. | 2,050 | 65 | 1:1 | Thick Liquid (30,000 cP) | -45° to 250° | Black | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Composites, Glass | 0000000 | 000000 |
| 1.65 | Syringe | 60 sec. | 24 hrs. | 1,950 | 65 | 1:1 | Thick Liquid (30,000 cP) | -45° to 250° | Black | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Composites, Glass | 0000000 | 00000 |
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Pkg. Qty. | Pkg. | |
| 0.1 | One-Time-Use Packet | 3 min. | 24 hrs. | 1,715 | 62 | 1.28:1 | Thick Liquid (10,000 cP) | -40° to 170° | Beige | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Composites, Glass | 10 | 0000000 | 000000 |
| 0.1 | One-Time-Use Packet | 5 min. | 24 hrs. | 2,280 | 10 | 1.33:1 | Thick Liquid (11,000 cP) | -40° to 200° | Beige | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Rubber, Rubber to Composites, Composites | 10 | 0000000 | 00000 |
| Each | ||
| Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
| Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
| Mixer Nozzle for 1.69 fl. oz. Devcon Cartridges | 00000000 | 0000 |
| Replacement Plunger for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000 |
| Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |
| Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000000 |
| Dispensing Gun for 1.69 fl. oz. Devcon Cartridges | 00000000 | 00000 |
Acrylic Structural Adhesives
Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts.
Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Adhesives with Mixer Nozzle | ||||||||||||
| 1.69 | Cartridge | 5 min. | 24 hrs. | 3,200 | 7 | 1:1 | Thick Liquid (64,000 cP) | -40° to 250° | Light Green | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry | 000000 | 000000 |
| 13.5 | Cartridge | 5 min. | 24 hrs. | 3,200 | 7 | 1:1 | Thick Liquid (64,000 cP) | -40° to 250° | Light Green | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry | 000000 | 00000 |
Instant-Bond Adhesives for Hard-to-Bond Materials
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives, also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
| 422 | 1 | Bottle | 0.008" | 30 sec. | 24 hrs. | Thick Liquid (2,250 cP) | -65° to 180° | Clear | Composites, Metal, Metal to Composites, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Composites, Plastic to Rubber, Rubber, Rubber to Composites | 00000000 | 000000 |
Construction Adhesives for Dissimilar Materials
Bond stone and glass to drywall, treated lumber, and subfloors with these adhesives.
Non-sag adhesives won't drip from vertical and overhead surfaces.
Adhesives that cannot be sold to the regions listed are restricted by labeling and reporting requirements in Canada, and by local regulatory limits on VOCs (volatile organic compounds) in the states listed.
Container | Strength | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in | Peel, lbs./in. wd. | Consistency | Temp. Range, °F | For Use Outdoors | For Joining | Cannot Be Sold To | Choose a Color | Each | |
Adhesives | ||||||||||||||
| 3.7 | Tube | 10 ft. @ 1/4" bead | 4 min. | 72 hrs. | 200 | 45 | Paste | -40° to 150° | No | Ceramic, Composites, Glass, Masonry, Metal, Metal to Composites, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Composites, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber, Rubber to Composites, Rubber to Glass, Rubber to Masonry, Wood, Wood to Glass | CA, CO, CT, DE, MD, RI, Canada | Clear | 0000000 | 00000 |
| 3.7 | Tube | 10 ft. @ 1/4" bead | 4 min. | 72 hrs. | 200 | 45 | Paste | -40° to 150° | Yes | Ceramic, Composites, Glass, Masonry, Metal, Metal to Composites, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Composites, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber, Rubber to Composites, Rubber to Glass, Rubber to Masonry, Wood, Wood to Glass | CA, CO, CT, DE, MD, RI, Canada | Clear | 0000000 | 00000 |
| 10.2 | Cartridge | 30 ft. @ 1/4" bead | 4 min. | 72 hrs. | 200 | 45 | Thick Liquid | -40° to 150° | No | Ceramic, Composites, Glass, Masonry, Metal, Metal to Composites, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Composites, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber, Rubber to Composites, Rubber to Glass, Rubber to Masonry, Wood, Wood to Glass | CA, CO, CT, DE, MD, RI, Canada | Black | 0000000 | 00000 |
| 10.2 | Cartridge | 30 ft. @ 1/4" bead | 4 min. | 72 hrs. | 200 | 45 | Paste | -40° to 150° | No | Ceramic, Composites, Glass, Masonry, Metal, Metal to Composites, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Composites, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber, Rubber to Composites, Rubber to Glass, Rubber to Masonry, Wood, Wood to Glass | CA, CO, CT, DE, MD, RI, Canada | Clear | 0000000 | 00000 |
| 10.2 | Cartridge | 30 ft. @ 1/4" bead | 4 min. | 72 hrs. | 200 | 45 | Paste | -40° to 150° | Yes | Ceramic, Composites, Glass, Masonry, Metal, Metal to Composites, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Composites, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber, Rubber to Composites, Rubber to Glass, Rubber to Masonry, Wood, Wood to Glass | CA, CO, CT, DE, MD, RI, Canada | Clear | 0000000 | 00000 |
Non-Sag Adhesives | ||||||||||||||
| 10.2 | Cartridge | 30 ft. @ 1/4" bead | 4 min. | 72 hrs. | 200 | 45 | Paste | -40° to 150° | No | Ceramic, Composites, Glass, Masonry, Metal, Metal to Composites, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Composites, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber, Rubber to Composites, Rubber to Glass, Rubber to Masonry, Wood, Wood to Glass | CA, CO, CT, DE, MD, RI, Canada | 000000 | 00000 | |