These non-sagging sealants will not drip while hardening on vertical and overhead surfaces. They’re thicker than most non-sagging sealants, so they can be used in vertical joints up to _1/2" wide.

Elongation indicates flexibility—the higher the values are, the more sealants can stretch. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone rubber, sealants are RTV (room-temperature vulcanizing).

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Elongation and joint expansion/compression tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint expansion/compression tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.

Tested to meet ASTM E595, a standard used by NASA, these sealants fill joints and seams while releasing almost no volatile emissions that could damage sensitive electronics, even in a vacuum. Made of silicone rubber, they’re RTV (room-temperature vulcanizing), so they’ll fully harden at room temperature.

Elongation indicates flexibility—the higher the value is, the more a sealant can stretch.

Impervious to the swelling effects of oils, fuels, and solvents, use this high-strength silicone rubber sealant to assemble and repair fuel systems and tanks. Silicone rubber forms a tough, rubbery, UV-resistant seal that remains flexible over time. It's non-sagging, so it won't drip from vertical and overhead surfaces. Also known as RTV (room-temperature vulcanizing).

Elongation and joint expansion/compression tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. This sealant is best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.

Keep out the elements by sealing roof joints. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish. They're good for use in environments with wide temperature fluctuation.

Apply these sealants on wet surfaces and in cold temperatures. They're non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.

Improve instant-bond adhesive performance on hard-to-bond slippery plastics.

Form seals that resist punctures, cuts, and abrasion to withstand heavy wear and tampering. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.

Apply these adhesives on two surfaces, air dry, and then bring together to bond.

Seal concrete joints in high-traffic areas—these sealants stand up to heavy wear and tear, such as steel wheel traffic. They're non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone rubber, sealants are RTV (room-temperature vulcanizing).

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.

Keep out the elements by sealing roof joints. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces. They are good for use in environments with wide temperature fluctuation.

Apply these sealants on wet surfaces and in cold temperatures. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain.

Seal concrete joints in high-traffic locations—these sealants stand up to heavy wear and tear, such as steel wheel traffic. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.

Form bonds with twice the strength of our other spray contact adhesives. Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to adhere.

Mix a small amount of water-based paint with this caulk to match the color of your surface. Caulk is non-sagging, so it won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement a sealant can sustain. This caulk is best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.

Spray these adhesive primers onto a mounting surface to quickly and smoothly apply signs, labels, and protective films. These primers float adhesive-backed sheets above a surface until you press them down, giving you time to position the sheet and remove any wrinkles. Since the sheet doesn’t stick right away, you can apply large sheets without needing a second pair of hands. These primers also work with non-adhesive films. Even in hot or cold temperatures, your sheet will stay put.

Clean the mounting surface with adhesive primer before applying a film, so no residue is trapped underneath. Use a smoothing tool (sold separately) to squeeze out air bubbles and excess fluid. Drying time depends on application—most decals and films will dry within 90 seconds, but 3D printer sheets should dry for 24 hours before printing.