McMaster-Carr logo
    Filter by
    Color
    Manufacturer Model Number
    Locking Strength
    Container Type
    Consistency
    Removal Method
    Clarity
    Minimum Temperature
    Mixing Required
    Begins to Harden
    Breakaway Torque
    Cure Type
    For Maximum Thread Diameter
    Formulation
    Maximum Temperature
    Reaches Full Strength
    Container Net Weight
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    1 Product

    Gel Threadlockers

    Image of Product. Front orientation. Threadlockers. Gel Threadlockers, Stick.

    Stick

    With a slower flow than liquids, gel threadlockers cling to fasteners for more controlled application and less mess. They begin to harden when you thread coated surfaces together, blocking exposure to air.
    Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes; and cadmium and zinc coatings.
    High Locking Strength—Keep fasteners firmly in place in motors, pumps, and other applications subjected to heavy shock and vibration. Breaking the bond of these threadlockers requires a propane torch, heat gun, or induction heater. As a result, they shouldn't be used in setups that you disassemble often.
    Container
    Mfr. Model
    No.
    Net Wt.,
    oz.
    Type
    Begins to
    Harden, min.
    Color
    Breakaway
    Torque,
    in·lbf
    Temp. Range,
    ° F
    Consistency
    Viscosity,
    cP
    Reaches Full
    Strength, hr.
    Each
    High Locking Strength
     
    Permatex
    270100.35Stick15Red175-65 to 300Gel240,000240000000000000
    Threadlocker Gel Permatex 27010, 0.35 oz. Stick
    EachDelivers tomorrow
    Closing Icon
     
    back to top