Filter by
Manufacturer Model Name
For Use On
Container Type
Manufacturer
Type
Cure Type
Reaches Full Strength
Unit Price
Material
Mix Ratio
Formulation
Begins to Harden
Maximum Temperature
Color
Consistency
Adhesive Type
Shear Strength
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Minimum Temperature
REACH
RoHS
Approximate Linear Coverage @ Bead Diameter
Elongation
Fitting Connection
Manufacturer Model Number
About Structural Adhesives
More
Toughened Acrylic Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
MA310 bonds dissimilar materials.
Plexus Adhesives

Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
MA310 | 31500 | 1.58 | Cartridge | 15 min. | 24 hrs. | 3,000 | 15 | 1:1 | Thick Liquid (55,000 cP) | -65° to 250° | Light Yellow | Metal, Metal to Plastic, Plastic, Plastic to Composites, Plastic to Masonry, Composites, Masonry, Wood | 00000000 | 000000 |