Pins on either side of the base lock these bulbs into sockets.

Offset pins on the base lock these bulbs into sockets. One pin is slightly higher on the base than the other pin.

Commonly used in signs, instruments, indicators, and flashlights.

Fit these bulbs in tight spaces such as signs, control panels, indicators, and flashlights.

These miniature bulbs are sized to fit older telephone switchboards, signs, instruments, and indicators.

Bulbs have two filaments, which operate at different brightness levels.

Pins on the base lock these bulbs into sockets to withstand vibration. They're often used in machines and elevators.

Rated IP65, these lights are sealed to protect against light washdowns from a garden hose. They have a height-adjustable stand and light heads that pivot up and down to direct light where it's needed.

These IP67 rated lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes. They're compact for easy transport to job sites with no electrical power.

Hang these lights where you need them on the job site.

All of these flashlights stand up to wet environments.

Small enough to fit in your pocket.

Small enough to keep in your shirt pocket, these penlights are rated for use in environments where hazardous material is present.

In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. They're rated for use in environments where hazardous material is present.

The smooth stainless steel surface allows for easy cleaning.

Gooseneck arms can be repositioned faster and more easily than articulating arms.

Pivot the head to cast a narrow beam of light to exactly where it's needed.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.

These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights.

Illuminate inline flow sights to inspect the color, clarity, and flow of liquids in food and beverage, brewery, chemical, and pharmaceutical processing lines.

A sealed head and switch keeps these lights shining in wet environments. They swing out from the wall and adjust horizontally and vertically to illuminate loading dock and trailers.

These lights cycle through three different flashing patterns.

The pad below the base absorbs shock and vibration.

These strobe lights flash multiple times per cycle, making them easier to spot than standard strobe lights.

Easier to spot than other strobe lights, these lights emit bursts of five flashes per cycle.

A series of four flashes per cycle makes these lights more visible than other strobe lights.

As small as a hockey puck and compatible with standard 12-volt vehicle plugs, these strobe lights are inconspicuous when not in use and quick to connect.

A series of four flashes per cycle makes these lights more visible than other strobe lights.

Set these portable lights wherever you need a signal light—they don't need to be wired or plugged in.

The buzzer warns workers of hazards even when they’re outside a direct line of sight.

When motion is detected from both directions at a two-way corner, these lights flash to alert personnel and prevent collisions.

Use these fixtures to mark vehicle sides and avoid misjudging clearance.

Add these lights to a forklift to improve safety. They contain a turn light, brake light, and backup light.