Sealed Thrust Bearings | McMaster-Carr

Filter by

Bearing Seal Type

Sealed

System of Measurement

Shaft Diameter

For Load Direction

Combined Radial and Thrust

Combined Radial, Thrust, and Moment

Bearing Type

Mounted Bearing Type

Four-Bolt Flange Mount

Dynamic Thrust Load Capacity

Less than 10,000 lb.

10,000 lb. to 19,999 lb.

20,000 lb. to 99,999 lb.

Roller Bearing Type

Bearing Construction

Lubrication

Width

Static Thrust Load Capacity

Less than 10,000 lb.

20,000 lb. to 99,999 lb.

100,000 lb. to 199,999 lb.

Dynamic Radial Load Capacity

1,000 lb. to 9,999 lb.

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

Maximum Rotation Speed

For Housing ID

Static Radial Load Capacity

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

30,000 lb. to 99,999 lb.

100,000 lb. or greater

Shaft Mount Type

Clamp On

Press Fit

Set Screw

Export Control Classification Number (ECCN)

REACH

RoHS

Compliant with Exemptions

Not Compliant

DFARS Specialty Metals

Cage Material

Minimum Temperature

113 Products

About Ball and Roller Bearings

Sealed

Thick, tapered rollers stand up to extremely high thrust loads.

Sealed bearings have better dust resistance than open bearings, but retain more heat.

For technical drawings and 3-D models, click on a part number.

				Thrust Load Cap., lbs.
For Shaft Dia.	OD	Thick.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F		Each
Sealed
1 1/4"	2.29"	0.677"	Steel	12,000	34,100	10	Required	0° to 150°	00000000	000000
1 3/8"	2.398"	0.656"	Steel	14,500	42,000	10	Required	0° to 150°	00000000	00000
1 1/2"	2.705"	0.815"	Steel	20,300	58,000	10	Required	0° to 150°	00000000	00000
1 5/8"	2.98"	0.8438"	Steel	20,500	62,500	10	Required	0° to 150°	00000000	00000
1 13/16"	3.455"	0.99"	Steel	28,400	91,250	10	Required	0° to 150°	00000000	00000
2 1/16"	3.823"	1.121"	Steel	37,500	115,000	10	Required	0° to 150°	00000000	000000

High-Load Face-Mount Crossed-Roller Bearings

With thicker inner and outer raceways, these bearings can handle heavier loads than thin-profile crossed roller bearings. Mounting holes on the inner and outer rings allow for fastening onto hollow joints and shafts. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.

Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

For technical drawings and 3-D models, click on a part number.

				Combined Load Cap., lbs.
For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	Features		Each
Sealed
10	52	8	Steel	650	540	1,900	Lubricated	0° to 210°	Lubrication Groove, Two Lubrication Holes	0000000	0000000
20	70	12	Steel	1,700	1,850	1,300	Lubricated	0° to 210°	Lubrication Groove, Two Lubrication Holes	0000000	000000
25	80	12	Steel	1,900	2,350	1,100	Lubricated	0° to 210°	Lubrication Groove, Two Lubrication Holes	0000000	000000
35	95	15	Steel	3,850	4,650	900	Lubricated	0° to 210°	Lubrication Groove, Two Lubrication Holes	0000000	000000
55	120	15	Steel	4,500	6,200	650	Lubricated	0° to 210°	Lubrication Groove, Two Lubrication Holes	0000000	000000
80	165	22	Steel	11,400	16,100	450	Lubricated	0° to 210°	Lubrication Groove, Two Lubrication Holes	0000000	000000
90	210	25	Steel	16,500	24,200	400	Lubricated	0° to 210°	Lubrication Groove, Two Lubrication Holes	0000000	00000000
115	240	28	Steel	18,950	31,000	300	Lubricated	0° to 210°	Lubrication Groove, Two Lubrication Holes	0000000	00000000
160	295	35	Steel	23,350	38,850	350	Lubricated	0° to 175°	Lubrication Groove, Two Lubrication Holes	0000000	00000000
210	380	40	Steel	35,050	63,150	260	Lubricated	0° to 175°	Lubrication Groove, Two Lubrication Holes	0000000	00000000

Thin-Profile Crossed-Roller Bearings

For a more compact machine, these bearings have thinner inner and outer rings than high-load crossed-roller bearings. Route hydraulic lines, electrical wiring, and other components through the inside of the bearing. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.

Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

For technical drawings and 3-D models, click on a part number.

				Combined Load Cap., lbs.
For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	Features		Each
Sealed
50	66	8	Steel	1,100	1,600	700	Lubricated	0° to 175°	Four Lubrication Holes	0000000	0000000
60	76	8	Steel	1,250	1,950	500	Lubricated	0° to 175°	Lubrication Groove, Lubrication Hole	0000000	000000
70	86	8	Steel	1,300	2,200	510	Lubricated	0° to 175°	Four Lubrication Holes	0000000	000000
80	96	8	Steel	1,400	2,500	460	Lubricated	0° to 175°	Four Lubrication Holes	0000000	000000
90	106	8	Steel	1,500	2,750	375	Lubricated	0° to 175°	Lubrication Groove, Lubrication Hole	0000000	000000
100	116	8	Steel	1,600	3,100	350	Lubricated	0° to 175°	Lubrication Groove, Lubrication Hole	0000000	000000
110	126	8	Steel	1,650	3,350	300	Lubricated	0° to 175°	Lubrication Groove, Lubrication Hole	0000000	000000
120	136	8	Steel	1,750	3,700	275	Lubricated	0° to 175°	Lubrication Groove, Lubrication Hole	0000000	000000
130	146	8	Steel	1,750	3,950	290	Lubricated	0° to 175°	Four Lubrication Holes	0000000	000000
140	156	8	Steel	1,850	4,250	270	Lubricated	0° to 175°	Four Lubrication Holes	0000000	000000
150	166	8	Steel	1,950	4,600	250	Lubricated	0° to 175°	Four Lubrication Holes	0000000	000000
160	186	13	Steel	5,200	10,050	230	Lubricated	0° to 175°	Four Lubrication Holes	0000000	000000
170	196	13	Steel	5,250	10,400	220	Lubricated	0° to 175°	Four Lubrication Holes	0000000	000000
180	206	13	Steel	5,500	11,150	205	Lubricated	0° to 175°	Four Lubrication Holes	0000000	000000
190	216	13	Steel	5,550	11,550	195	Lubricated	0° to 175°	Four Lubrication Holes	0000000	000000
200	226	13	Steel	5,800	12,250	175	Lubricated	0° to 175°	Lubrication Groove, Lubrication Hole	0000000	00000000

High-Load Crossed-Roller Bearings

The thicker inner and outer raceways on these bearings can handle heavier loads than the thin-profile crossed-roller bearings. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.

Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

For technical drawings and 3-D models, click on a part number.

				Combined Load Cap., lbs.
For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	Features		Each
Sealed
20	36	8	Steel	650	540	2,100	Lubricated	0° to 245°	Lubrication Groove, Two Lubrication Holes	0000000	0000000
30	55	10	Steel	1,700	1,850	1,400	Lubricated	0° to 245°	Lubrication Groove, Two Lubrication Holes	0000000	000000
40	65	10	Steel	1,900	2,350	1,100	Lubricated	0° to 245°	Lubrication Groove, Two Lubrication Holes	0000000	000000
50	80	13	Steel	3,850	4,600	900	Lubricated	0° to 210°	Lubrication Groove, Two Lubrication Holes	0000000	000000
60	90	13	Steel	4,200	5,400	800	Lubricated	0° to 210°	Lubrication Groove, Two Lubrication Holes	0000000	000000
70	100	13	Steel	4,500	6,200	700	Lubricated	0° to 210°	Lubrication Groove, Two Lubrication Holes	0000000	000000
80	120	16	Steel	7,200	9,700	600	Lubricated	0° to 210°	Lubrication Groove, Two Lubrication Holes	0000000	000000
90	130	16	Steel	7,400	10,500	540	Lubricated	0° to 245°	Lubrication Groove, Two Lubrication Holes	0000000	000000
100	150	20	Steel	11,400	16,200	480	Lubricated	0° to 245°	Lubrication Groove, Two Lubrication Holes	0000000	000000
110	160	20	Steel	11,750	17,400	440	Lubricated	0° to 245°	Lubrication Groove, Two Lubrication Holes	0000000	000000
120	180	25	Steel	16,500	24,250	400	Lubricated	0° to 245°	Lubrication Groove, Two Lubrication Holes	0000000	000000
200	260	25	Steel	20,700	37,950	260	Lubricated	0° to 245°	Lubrication Groove, Two Lubrication Holes	0000000	00000000

Angular-Contact Thrust Ball Bearings

Sealed

Single-row bearings handle thrust loads on one side. For applications with thrust loads on both sides, mount them in pairs.

Double-row bearings handle thrust loads in both directions.

Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.

For technical drawings and 3-D models, click on a part number.

					Combined Load Cap., lbs.
Bearing Trade Number	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Contact Angle	Temp. Range, °F	ABEC Rating	Specifications Met		Each
Single Row
Sealed
7200-2RS	10	30	9	Steel	1,150	580	15,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7201-2RS	12	32	10	Steel	1,650	790	14,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7202-2RS	15	35	11	Steel	1,850	1,000	24,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7203-2RS	17	40	12	Steel	2,350	1,250	11,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7204-2RS	20	47	14	Steel	3,100	1,750	9,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7205-2RS	25	52	15	Steel	3,400	2,000	8,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7206-2RS	30	62	16	Steel	4,850	3,150	6,300	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7207-2RS	35	72	17	Steel	6,250	4,250	5,600	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7208-2RS	40	80	18	Steel	7,600	5,250	5,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7302-2RS	15	42	13	Steel	3,150	1,600	11,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7303-2RS	17	47	14	Steel	3,950	2,000	13,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7304-2RS	20	52	15	Steel	4,550	2,450	8,500	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7305-2RS	25	62	17	Steel	6,250	3,600	7,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7306-2RS	30	72	19	Steel	7,650	4,950	6,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7308-2RS	40	90	23	Steel	11,900	7,750	4,500	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
Double Row
Sealed
3200-2RS	10	30	14	Steel	1,700	960	17,000	Lubricated	30°	-40° to 210°	ABEC-1	__	00000000	000000
3201-2RS	12	32	15.9	Steel	2,250	1,250	15,000	Lubricated	30°	-40° to 210°	ABEC-1	__	00000000	000000
3202-2RS	15	35	15.9	Steel	2,500	1,500	14,000	Lubricated	30°	-40° to 210°	ABEC-1	__	00000000	000000
3203-2RS	17	40	17.5	Steel	3,200	1,950	12,000	Lubricated	30°	-40° to 210°	ABEC-1	__	00000000	00000
3204-2RS	20	47	20.6	Steel	4,450	2,650	10,000	Lubricated	30°	-40° to 210°	ABEC-3	__	00000000	000000
3205-2RS	25	52	20.6	Steel	4,850	3,200	8,500	Lubricated	30°	-40° to 210°	ABEC-3	__	00000000	000000
3206-2RS	30	62	23.8	Steel	6,700	4,550	7,500	Lubricated	30°	-40° to 210°	ABEC-3	__	00000000	000000
3207-2RS	35	72	27	Steel	8,950	6,250	6,300	Lubricated	30°	-40° to 210°	ABEC-3	__	00000000	000000
3208-2RS	40	80	30.2	Steel	10,600	7,600	5,600	Lubricated	30°	-40° to 210°	ABEC-3	__	00000000	000000
3210-2RS	50	90	30.2	Steel	11,400	8,750	4,800	Lubricated	30°	-40° to 210°	ABEC-3	__	00000000	000000
3303-2RS	17	47	22.2	Steel	4,850	2,850	11,000	Lubricated	30°	-40° to 210°	ABEC-1	__	00000000	000000
3304-2RS	20	52	22.2	Steel	5,300	2,250	9,000	Lubricated	30°	-40° to 210°	ABEC-3	__	00000000	000000
3305-2RS	25	62	25.4	Steel	7,150	4,550	7,500	Lubricated	30°	-40° to 210°	ABEC-3	__	00000000	000000

High-Speed Angular-Contact Thrust Ball Bearings

Sealed

An ABEC-7 rating means these bearings are made to some of the tightest tolerances, so they operate at the highest speeds.

Sealed bearings block out dust and other contaminants better than open bearings, but retain the most heat.

For technical drawings and 3-D models, click on a part number.

					Combined Load Cap., lbs.
Bearing Trade Number	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Contact Angle	Temp. Range, °F	ABEC Rating		Each
Single Row
Sealed
7006	30	55	13	Steel	3,550	2,300	27,100	Lubricated	15°	0° to 230°	ABEC-7	0000000	0000000
7007	35	62	14	Steel	4,500	3,050	23,800	Lubricated	15°	0° to 230°	ABEC-7	0000000	000000
7008	40	68	15	Steel	4,850	3,550	21,300	Lubricated	15°	0° to 230°	ABEC-7	0000000	000000
7009	45	75	16	Steel	5,750	4,300	19,200	Lubricated	15°	0° to 230°	ABEC-7	0000000	000000
7010	50	80	16	Steel	6,100	4,900	17,700	Lubricated	15°	0° to 230°	ABEC-7	0000000	000000
7011	55	90	18	Steel	8,050	6,400	15,900	Lubricated	15°	0° to 230°	ABEC-7	0000000	00000000
7012	60	95	18	Steel	8,300	6,850	14,900	Lubricated	15°	0° to 230°	ABEC-7	0000000	00000000
7013	65	100	18	Steel	8,750	7,750	14,000	Lubricated	15°	0° to 230°	ABEC-7	0000000	00000000

Mounted Roller Bearings with Four-Bolt Flange

The tapered rollers in these bearings support large shafts at high static loads. Seals block out dust and contaminants.

For technical drawings and 3-D models, click on a part number.

	Overall				Mounting		Radial Load Cap., lbs.
For Shaft Dia.	Ht.	Lg.	Wd.	Flange Thick.	Hole Dia.	Hole Ctr.-to-Ctr.	Dynamic	Static	Dynamic Thrust Load Cap., lbs.	Max. Speed, rpm	Temp. Range, °F	Alignment Style	Lubrication		Each
Sealed Tapered-Roller Bearings
Steel Bearings with Cast Iron Housing—Shaft Mount Type: Set Screw
1 1/4"	3 3/4"	3 3/4"	2 13/16"	1"	3/8"	2 7/8"	3,800	15,700	2,000	4,400	-60° to 250°	Fixed Alignment	Lubricated	0000000	0000000
1 1/2"	5 3/8"	5 3/8"	3 1/2"	1 3/16"	1/2"	4 1/8"	7,850	33,000	2,550	3,300	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
1 3/4"	5 5/8"	5 5/8"	3 5/8"	1 3/16"	1/2"	4 3/8"	10,300	43,000	2,550	3,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
2"	5 5/8"	5 5/8"	3 5/8"	1 3/16"	1/2"	4 3/8"	10,300	43,000	2,550	3,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
2 1/2"	6 7/8"	6 7/8"	4 3/16"	1 1/2"	5/8"	5 3/8"	11,600	54,000	3,450	2,400	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
3"	7 3/4"	7 3/4"	4 11/16"	1 5/8"	3/4"	6"	12,300	61,000	5,150	2,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
3 1/2"	9 1/4"	9 1/4"	5 1/4"	1 7/8"	3/4"	7"	19,600	108,000	5,150	1,600	-60° to 250°	Fixed Alignment	Lubricated	0000000	00000000
4"	10 1/4"	10 1/4"	6 1/2"	2 1/8"	7/8"	7 3/4"	26,900	154,000	6,900	1,500	-60° to 250°	Fixed Alignment	Lubricated	0000000	00000000
35mm	4 5/8"	4 5/8"	3 1/16"	1 1/16"	1/2"	3 1/2"	6,100	26,000	2,550	3,800	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
50mm	5 5/8"	5 5/8"	3 5/8"	1 3/16"	1/2"	4 3/8"	10,300	43,000	2,550	3,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000

Mounted Roller Bearings

Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.

Sealed bearings block out dust and contaminants.

For technical drawings and 3-D models, click on a part number.

Sealed Tapered-Roller Bearings

Sealed Tapered-Roller Bearing

		Overall			Mounting			Radial Load Cap., lbs.
For Shaft Dia.	Center Ht.	Ht.	Lg.	Wd.	Hole Lg.	Hole Wd.	Hole Ctr.-to-Ctr.	Dynamic	Static	Dynamic Thrust Load Cap., lbs.	Max. Speed, rpm	Temp. Range, °F	Alignment Style	Lubrication		Each
Steel Bearings with Cast Iron Housing—Shaft Mount Type: Set Screw
1 1/4"	1 1/2"	3"	6"	2 3/4"	19/32"	9/16"	4 25/32"	3,800	15,700	2,000	4,400	-60° to 250°	Fixed Alignment	Lubricated	0000000	0000000
1 3/8"	1 7/8"	3 3/4"	7 3/8"	3"	3/4"	5/8"	5 3/4"	6,100	26,000	2,550	3,800	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
1 1/2"	2 1/8"	4 1/4"	7 7/8"	3 3/8"	3/4"	5/8"	6 1/4"	7,850	33,000	2,550	3,300	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
1 5/8"	2 1/8"	4 1/4"	7 7/8"	3 3/8"	3/4"	5/8"	6 1/4"	7,850	33,000	2,550	3,300	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
1 3/4"	2 1/4"	4 1/2"	8 7/8"	3 1/2"	7/8"	3/4"	7"	10,300	43,000	2,550	3,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
2"	2 1/4"	4 1/2"	8 7/8"	3 1/2"	7/8"	3/4"	7"	10,300	43,000	2,550	3,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
2 1/4"	2 3/4"	5 23/32"	10 1/2"	4"	7/8"	3/4"	8 1/2"	11,600	54,000	3,450	2,400	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
2 1/2"	2 3/4"	5 23/32"	10 1/2"	4"	7/8"	3/4"	8 1/2"	11,600	54,000	3,450	2,400	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
2 3/4"	3 1/8"	6 1/4"	12"	4 1/2"	1"	27/32"	9 1/2"	12,300	61,000	5,150	2,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
3"	3 1/8"	6 1/4"	12"	4 1/2"	1"	27/32"	9 1/2"	12,300	61,000	5,150	2,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
3 1/2"	3 3/4"	7 1/2"	14"	5"	1 3/16"	1"	11"	19,600	108,000	5,150	1,600	-60° to 250°	Fixed Alignment	Lubricated	0000000	00000000
4"	4 1/4"	8 1/2"	15 1/4"	6 1/4"	1 1/8"	7/8"	12 1/2"	26,900	154,000	6,900	1,500	-60° to 250°	Fixed Alignment	Lubricated	0000000	00000000
35mm	1 7/8"	3 3/4"	7 3/8"	3"	3/4"	5/8"	5 3/4"	6,100	26,000	2,550	3,800	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
40mm	2 1/8"	4 1/4"	7 7/8"	3 3/8"	3/4"	5/8"	6 1/4"	7,850	33,000	2,550	3,300	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000
50mm	2 1/4"	4 1/2"	8 7/8"	3 1/2"	7/8"	3/4"	7"	10,300	43,000	2,550	3,000	-60° to 250°	Fixed Alignment	Lubricated	0000000	000000

Easy-Install Mounted Cylindrical-Roller Bearings

Clamp-On Shaft Mount

A split housing means you can remove the top half of these bearings to inspect or repair shafts and components. This reduces downtime and minimizes the risk of damaging surrounding components.

Bearings for combined radial and thrust loads anchor the shaft in position and absorb the thrust load. However, they are not designed to handle your shaft expanding and contracting. They’re typically mounted near the drive side of an assembly.

For technical drawings and 3-D models, click on a part number.

Mounted Bearings
		Overall			Mounting		Radial Load Cap., lbs.		Thrust Load Cap., lbs.								Replacement Bearings
For Shaft Dia.	Center Ht.	Ht.	Lg.	Wd.	Hole Dia.	Hole Ctr.-to-Ctr.	Dynamic	Static	Dynamic	Static	Max. Speed, rpm	Temp. Range, °F	Alignment Style	Lubrication		Each		Each
Sealed Steel Bearings with Iron Housing—Shaft Mount Type: Clamp On
For Combined Radial and Thrust Load Direction
1 15/16"	2 3/4"	6 1/4"	10 5/8"	2 3/8"	5/8"	8 7/8"	18,290	22,490	280	280	5,420	35° to 210°	Self Aligning	Required	0000000	000000000	0000000	0000000
2 3/16"	3 5/32"	7"	11"	2 3/4"	3/4"	9 1/2"	20,250	24,850	350	350	4,460	35° to 210°	Self Aligning	Required	0000000	00000000	0000000	000000
2 7/16"	3 5/32"	7"	11"	2 3/4"	3/4"	9 1/2"	20,250	24,850	350	350	4,460	35° to 210°	Self Aligning	Required	0000000	00000000	0000000	000000
2 15/16"	3 3/4"	7 7/8"	13"	3"	3/4"	11"	29,840	40,070	430	430	3,750	35° to 210°	Self Aligning	Required	0000000	00000000	0000000	00000000

Email Us

About Ball and Roller Bearings

Tapered-Roller Thrust Bearings

High-Load Face-Mount Crossed-Roller Bearings

Thin-Profile Crossed-Roller Bearings

High-Load Crossed-Roller Bearings

Angular-Contact Thrust Ball Bearings

High-Speed Angular-Contact Thrust Ball Bearings

Mounted Roller Bearings with Four-Bolt Flange

Mounted Roller Bearings

Easy-Install Mounted Cylindrical-Roller Bearings