We will reply to your message within an hour.
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.
A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.
Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.
Mix a small amount of water-based paint with this caulk to match the color of your surface.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.
The textured finish matches concrete surfaces.
Designed for use on ovens and kilns, these sealants form a durable, rock-hard seal after firing.
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater.
Prepare joints and surfaces to ensure proper sealant adhesion.
Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.
These coatings are used in enclosed, high-traffic spaces. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.
Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.
Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.
Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.
Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.
Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.
Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.
Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water.
Hold back standing water. These coatings soak into the top layer of masonry to create a thick, waterproof seal rated up to 15 psi.
Made from silicone, these coatings are more durable than acrylic coatings for roofs and have better resistance to pooling water. They reflect up to 90% of the sun's rays to reduce cooling costs.
Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal.
This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.
Match the manufacturers' color of your forklift, lift truck, or pallet truck to cover scratches and wear.
Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.
Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.
Enhance, renew, and protect surfaces.
This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.
Create a washable writing surface.
Make items stand out under emergency lighting or in low-light environments.
Make your surface magnetic with this paint.
Made of rubber and iron oxide, these sheets can be cut with scissors to create custom-shaped nonmetallic, nonmagnetic surface that magnets will stick to.
Eliminate paint splatter clean-up—drops dry to a powder as they fall from ceilings 10 feet and higher.
Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.
Prepare metal, wood, and concrete for paint. Primers adhere to underlying surfaces to create a base layer that bonds well with paint for a long-lasting finish.
Use these primers in enclosed occupied areas, such as hospitals, schools, and offices. They cover stains and prepare your surface, extending the life of paint and coatings.
Also known as block filler, these primers fill cracks and smooth surface irregularities. Use them to prepare concrete floors to extend the life of paint and coatings.
Use these primers on metal surfaces in enclosed occupied areas, such as hospitals, schools, and offices. They have excellent resistance to moisture and corrosion and bond well to metal to extend the life of paint and coatings.
Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.
Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.
These patching compounds are the most flexible and watertight we offer.
Reinforce hot- and cold-applied asphalt patching compounds and coatings with this flexible fabric.
Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls.
Fill cracks in horizontal, vertical, and overhead concrete surfaces.
Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.
Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.
Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.
Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.
For use when thickness will be less than 2", sand mixes consist of cement and sand.
For use when thickness will be more than 2", concrete mixes consist of cement, sand, and gravel.
Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.
Used for brick, block, and stone laying as well as for repairing masonry, mortar mixes consist of fine sand and masonry cement.
Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring.
Use cartridges with a standard caulk gun for quick and easy dispensing.
These adhesives come in a tube.
Bond glass and stone to drywall, treated lumber, and subfloors.
These kits include adhesives, applicators, and mixer nozzles.
Permanently set threaded rods, studs, and rebar in concrete.
When concrete is saturated or submerged in water, use these adhesives to form strong bonds.
These adhesives maintain their strength at temperatures up to 250° F.