Resistant to mold and mildew, these sealants are well suited to high-humidity environments.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start.

Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media.

Wind this multifilament cord into the grooves of tapered pipe threads to quickly create a seal.

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.

Thinner than potting compounds, these rigid and wear-resistant coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards.

This coating is formulated for use in sensitive applications such as manufacturing semiconductors.

No mixing required—these potting compounds come ready to apply.

Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.

The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

Make castings and fill voids with these two-part pourable epoxies.

For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers.

These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.

These gasket makers come in a tube.

Push the plunger to precisely dispense small amounts.

These gasket makers come in a tube.

Dispense a uniform bead when you press the nozzle.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These gasket makers combine oil resistance and the flexibility to accommodate movement.

These adhesives come in a can.

In or out of water, these sealants maintain their strength.

Create flexible seals that never fully harden.

Prevent threaded fasteners from loosening due to shock and vibration.

Withstand demanding, high-vibration applications such as motor and pump housings with these threadlockers.

These threadlockers meet NSF/ANSI 61 for drinking water.

These threadlockers develop usable strength within one hour. Because they harden quickly on most metals, they don't require a primer.

This thick paste withstands temperatures up to 650 °F.

Wrap this no-mess tape around threaded fasteners up to 30 days before installation.

Use these threadlockers for threaded fasteners that require occasional fine-tuning, such as set screws.

Fill gaps up to 0.01" to secure unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies.

Fill gaps up to 0.02" to secure worn unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies.