About Structural Adhesives
More
About Sealant Flexibility
More
Noncorrosive Silicone Sealants
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Sealants that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Cannot Be Sold To | Color | Each | |
Permatex Silicone | |||||||||||||
| 81173 | 12.9 | Cartridge | 30 min. | 24 hrs. | 350% | Not Rated | Soft (Durometer 18A) | -75° to 450° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | Black | 0000000 | 000000 |
Gasket Maker Sealants in Cartridges
Use cartridges with a standard caulk gun for quick and easy dispensing. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets.
Permatex gasket maker is RTV (room temperature vulcanizing).
| Manufacturer Model Number | Container Size, fl. oz. | Max. Gap Size Filled | Begins to Harden, min. | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use On | Each | |
Permatex Gasket Maker Sealants | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 80628 | 12.9 | 0.25" | 60 | 24 | -65° to 400° | Blue | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Glass, Wood | 0000000 | 000000 |
Flexible Gasket Maker Sealants in Cartridges
Make gaskets that accommodate movement. Use cartridges with a standard caulk gun for quick and easy dispensing. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets.
Loctite® 598™ and Permatex 24105 are RTV (room temperature vulcanizing).
| Manufacturer Model Number | Container Size | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use On | Each | |
Permatex Gasket Maker Sealants | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 24105 | 13 oz. | 0.25" | 2 hrs. | 24 | -65° to 400° | Black | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 000000 |
Flexible Gasket Maker Sealants in Nozzle-Top Cans
Make gaskets that accommodate movement. Press the nozzle to dispense a uniform bead. Gasket maker is used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and makes it easy to form irregular-shaped gaskets. It is RTV (room temperature vulcanizing).
| Manufacturer Model Number | Container Size | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use On | Each | |
Permatex Gasket Maker Sealants | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 85080 | 9.5 oz. | 0.25" | 2 hrs. | 24 | -65° to 400° | Black | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 000000 |
Fast-Hardening Gasket Maker Sealants in Nozzle-Top Cans
The thick consistency of these gasket makers creates a seal right away even before they harden. This means you can safely return your application to normal operation in just one minute. Press the nozzle to dispense a uniform bead. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets. All are RTV (room temperature vulcanizing).
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model Number | Net Weight, oz. | Max. Gap Size Filled | Begins to Harden, min. | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use On | Each | |
Permatex Gasket Maker Sealants | |||||||||
| 25224 | 7 | 0.25" | 5 | 24 | -75° to 450° | Black | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Glass, Wood | 00000000 | 000000 |
| 85224 | 7 1/2 | 0.25" | 5 | 24 | -75° to 450° | Black | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Glass, Wood | 00000000 | 00000 |
High-Temperature Gasket Maker Sealants in Nozzle-Top Cans
Create gaskets that withstand temperatures up to 600° F. Press the nozzle to dispense a uniform bead. Gasket maker is used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and they make it easy to form irregular-shaped gaskets. It is RTV (room temperature vulcanizing).
| Manufacturer Model Number | Container Net Weight, oz. | Max. Gap Size Filled | Begins to Harden, min. | Reaches Full Strength, hrs. | Temp. Range, °F | Color | Specifications Met | For Use On | Each | |
Permatex Gasket Maker Sealants | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 85915 | 7.25 | 0.25" | 60 | 24 | -65° to 600° | Red | MIL-A-46106 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Glass, Wood | 0000000 | 000000 |
High-Temperature Gasket Maker Sealants in Cartridges
Create gaskets that withstand temperatures up to 600° F. Use cartridges with a standard caulk gun for quick and easy dispensing. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets. They are RTV (room temperature vulcanizing).
| Manufacturer Model Number | Container Size, fl. oz. | Max. Gap Size Filled | Begins to Harden, min. | Reaches Full Strength, hrs. | Temp. Range, °F | Color | Specifications Met | For Use On | Each | |
Permatex Gasket Maker Sealants | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 81409 | 11 | 0.25" | 60 | 24 | -65° to 600° | Red | MIL-A-46106 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Glass, Wood | 0000000 | 000000 |
Flexible High-Temperature Gasket Maker Sealants
This gasket maker combines the ability to withstand temperatures up to 600° F with the flexibility to accommodate movement. It is used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets. It is RTV (room temperature vulcanizing).
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model Number | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden, min. | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use On | Each | |
Permatex Gasket Maker Sealants | ||||||||||
| 81878 | 3 | Tube | 0.25" | 60 | 24 | -65° to 600° | Copper | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Glass, Wood | 00000000 | 000000 |
Oil-Resistant Gasket Maker Sealants
Form gaskets that won't degrade in the presence of oils. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets. They are RTV (room temperature vulcanizing).
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model Number | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use On | Each | |
Permatex Gasket Maker Sealants | ||||||||||
| 81724 | 3.35 | Tube | 0.25" | 2 hrs. | 24 | -65° to 400° | Blue | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Glass, Wood | 0000000 | 000000 |
Oil-Resistant Gasket Maker Sealants in Cartridges
Form gaskets that won't degrade in the presence of oils. Use cartridges with a standard caulk gun for quick and easy dispensing. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets. They are RTV (room temperature vulcanizing).
| Manufacturer Model Number | Container Size, fl. oz. | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use On | Each | |
Permatex Gasket Maker Sealants | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 81725 | 13 | 0.25" | 2 hrs. | 24 | -65° to 400° | Blue | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Glass, Wood | 0000000 | 000000 |
Threadlocker Gel
This gel clings to fasteners to prevent drips. It begins to harden once coated surfaces are threaded together and exposure to air is blocked.
Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes, and cadmium and zinc coatings.
Threadlockers in sticks dispense with a twist.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Temp. Range, °F | For Max. Thread Dia. | Consistency | Viscosity, cP | Breakaway Torque, in.-lbs. | Color | Each | |
Medium Locking Strength | ||||||||||||
Permatex Threadlockers | ||||||||||||
| 24010 | 0.35 | Stick | 15 min. | 24 hrs. | -65° to 300° | 1" | Gel | 200,000 | 115 | Blue | 0000000 | 000000 |
High Locking Strength | ||||||||||||
Permatex Threadlockers | ||||||||||||
| 27010 | 0.35 | Stick | 15 min. | 24 hrs. | -65° to 300° | 1" | Gel | 240,000 | 175 | Red | 0000000 | 00000 |