These seals have a metal case that creates a tight seal when mating with smooth surfaces.

Also known as grease seals, these are designed to retain thick lubricant at low pressure. They have a light grip on the shaft that creates less friction than spring-loaded seals.

Commonly used in mixing and grinding equipment, conveyors, and construction machinery, these two-part seals withstand exposure to abrasive material.

The slippery PTFE surface of these seals allows rod motion up to seven times faster than our other rod seals.

PTFE gives these seals a slippery surface that allows rod speeds more than two times faster than our other piston seals.

Rated for pressure up to 10,000 psi, these seals withstand the highest pressure of our piston seals.

Made from PTFE, these wear rings have a slippery surface that allows rods to move at least three times faster than nylon wear rings.

Softer than standard Buna-N O-rings for a better seal in low-pressure applications.

When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements. These resist grease, hydraulic oils, and motor oil.

Also known as Quattro Seals and X-rings, these X-profile O-rings have four points of contact for a better seal in dynamic applications than round-profile O-rings. They also require less compression to make a seal, so they offer a longer service life.

These O-rings have eight points of contact for a better seal in dynamic applications than X-profile O-rings, plus they have eight grooves that hold lubricant to reduce friction and wear for a longer service life.

These Buna-N O-rings are made and bagged in an ISO Class 7 (Fed. Std. 10,000) clean room.

In addition to resisting chemicals, such as benzene, butyl alcohol, and ethylene glycol, these Viton® fluoroelastomer ETP O-rings resist steam.

Unlike silicone, the Viton® fluoroelastomer core will continue to ward of chemicals should the FEP casing wear away.

Able to bounce back after repeated compression, these Kalrez 7075 O-rings last longer than other Kalrez O-rings when exposed to repeated heating/cooling cycles.

Made of Kalrez 6230, these O-rings are for use when high purity is essential, such as with food and semiconductors.

These square-profile O-rings have flat edges on all four sides, so they cover more surface than round-profile O-rings for a better seal in static applications, such as hose, pipe, and faucet connections.

These O-rings withstand higher temperatures than standard EPDM O-rings.

When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements.

These O-rings also resist ammonia, ethylene glycol, and isopropyl alcohol.

This cord stock is softer and creates a better seal in low-pressure applications than standard Buna-N cord stock.

The X shape of this cord stock provides four points of contact for a better seal in dynamic applications than round profile. It also requires less compression to make a seal, so it offers a longer service life.

More chemical resistant than standard Viton® fluoroelastomer, this cord stock is made of Grade ETP Viton® fluoroelastomer. It resists harsh chemicals, such as calcium hydroxide, methyl ethyl ketone (MEK), and nitric and phosphoric acids.

Use neoprene cord stock to make O-rings for applications that come into contact with water.

Softer than standard Buna-N O-rings for a better seal in low-pressure applications.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.