Use these corrosion-resistant fittings in a low-pressure pipe line.

Unlike other stainless steel fittings, these are made in the U.S.A. for superior quality. As another marker of quality, they come with a certificate with a traceable lot number and test report that guarantees material composition.

Use these heavy duty, corrosion-resistant fittings in high-pressure flow applications.

Choose these fittings when you want the same high-quality found in our low-pressure pipe fittings, but need more strength to handle higher pressures.

Typically used with standard-wall and low-pressure stainless steel unthreaded pipe fittings.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Use these heavy duty forged flanges for high-pressure applications.

Also known as Schedule 40, this steel pipe is designed for low-pressure applications.

These fittings can stand up to high-pressure applications. Use them in noncorrosive environments.

A galvanized finish gives these fittings better corrosion resistance than our plain steel high-pressure fittings. Also known as Pressure Class 3000 fittings.

Typically used with medium-pressure iron and steel threaded pipe fittings. Also known as Schedule 80.

The strongest steel fittings we offer, these can withstand extreme-pressure applications.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Even in temperatures as low as -46°, these A350 LF2 steel flanges won’t become brittle, so they absorb impact better than other low-pressure steel flanges.

With thicker, stronger walls than our standard-wall butt-weld pipe fittings, these fittings stand up to your high strength applications.

Typically used with thick-wall and high-pressure iron and steel unthreaded pipe fittings. Also known as Schedule 80.

Typically used with low-pressure brass and bronze threaded pipe fittings.

Typically used with low-pressure brass and bronze threaded pipe fittings.

Typically used with medium-pressure brass and bronze threaded pipe fittings.

Typically used with low-pressure aluminum threaded pipe fittings.

Typically used with high-pressure aluminum threaded pipe fittings.

Use these unthreaded flanges in low-pressure applications. Also known as Pressure Class 125 flanges.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Thick walls give these Schedule 80 fittings excellent strength.

Also called close nipples, these Schedule 40 nipples are threaded on both ends to the center.

Also known as instrumentation fittings, these are made to tighter tolerances than standard compression fittings. They are compatible with Parker CPI fittings.

The flared end of the fitting nests inside the fitting body, providing extra support to the tubing. Fittings are also known as inverted 45° flared fittings.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°.

Individually bagged to prevent contamination, these fittings are suitable for applications that require a high level of cleanliness.

A PTFE seal on the tube end of these fittings allows for an extra-strong connection in high-vibration applications.

Save time installing sleeves and nuts—these sets come oriented in the correct direction and order on a dispenser.

These fittings have the highest pressure rating of all the Yor-Lok tube fittings we offer.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included.

Instead of a metal sleeve (ferrule), these fittings have a rubber sleeve that cushions tubing and absorbs vibration to maintain a tight seal, even when connected to large pumps.

The flat face of the fitting connects to a tube adapter so you can slide the tubing and fitting sideways to disconnect in cramped spaces. They are also known zero-clearance fittings.

Create access points in ultra-high-vacuum lines or chambers by bolting two same-size flanges together with a copper gasket between them. The flanges’ sharp edges dig into the copper gasket and form an extremely tight seal, which means they handle higher vacuum pressures than other high-vacuum fittings with rubber gaskets.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on steel tubing that is flared to 37°.

Also known as JIS (Japanese Industrial Standard) fittings.

Thicker walls make these fittings—sometimes called flareless or bite fittings—withstand about twice as much pressure as standard compression fittings, so they’re good for hydraulic power applications.

These fittings have two sleeves for extra gripping power. They bite into steel tubing as you tighten the nut to form a strong seal.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight seal on tubing that is flared to 37°.

With the best corrosion resistance of any metal fitting we offer, these Hastelloy fittings will stand up to aggressive chemicals and are resistant to pitting and stress cracking. Also known as instrumentation fittings, they include a nut with two sleeves.