Illuminate entryways and walkways at night—these lights shine when they detect motion. Powered by the sun, they can be installed where you don’t have access to electricity. They dim at night when no motion is detected to save battery. All meet IP65 and are sealed against dust and moisture, so they’ll stand up to wet weather.

For best performance, position the solar panel in full sunlight and avoid shaded areas.

These lights can also be set to turn on at dusk and run for 6 or 8 hrs. Style A operate continuously at 10% brightness. Styles B-E operate continuously at full brightness.

Styles D and E include a cord to install the solar panel where there is sunlight. Style D are ideal for cold climates because their insulated battery charges at temperatures as low as 0° F. The solar panel can also mount directly to the light when space is tight.

Startle intruders and draw attention to activity in remote areas without access to power—these solar-powered lights shine bright when motion is detected. They charge during the day, and the battery lasts all night with typical activity. If triggered continuously, these lights reduce brightness to last six hours on a full charge. Rated for use in wet locations, they hold up in rain and humidity.

Mount these lights about 8 ft. high on exterior walls. For maximum sunlight exposure, place the solar panel on a roof or wall.

Lights with two heads can also be set to turn on at dusk and run continuously for up to six hours, even if no motion is detected. They include a stake for installing the solar panel in the ground.

Illuminate paths, driveways, and other areas that don’t have a power source without running wires underground. Install these lights in a sunny area, and a solar panel on the top will keep their battery charged. They turn on automatically at dusk and off at dawn. Rated IP65, these lights are sealed against dust and moisture, so they’ll stand up to sprinklers and wet weather. Install them into concrete with the included anchors. To avoid dark spots, space these lights no more than 12 ft. apart.

Mount these lights on a pole to illuminate pedestrian areas such as streets and walkways. No need for timers—a sensor automatically turns the light on at dusk and off at dawn. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other technologies. They produce a neutral white light. All include hardware for mounting to poles with 1 5/8" and 2 3/8" OD.

Point these lights toward paths, doorways, and other dark areas. Since they run on batteries, you can skip the hassle of running wires. They only turn on when they sense motion, so the batteries last longer than they do in lights that are always on. These lights are rated IP06—they’re sealed for protection from wet weather.

See what’s happening outside your facility—day and night. These lights have a built-in video camera that records when they sense motion. When it’s dark, the LED heads activate at the same time to illuminate the area. The speaker has two-way audio, so you can talk to the person on camera. You can also blast a siren through the speaker to deter a potential intruder. Rated for use in wet locations, these lights hold up to rain and humidity.

Download the free app to your mobile device to control these lights via Wi-Fi. Use the app to adjust settings, set up notifications, schedule lights to turn on and off, and review footage. Because videos are stored on the included 128 GB microSD card, you don’t need to pay for a subscription to view them. The app alerts you when storage is low. If it runs out, new videos record over the oldest ones.

Hang these lights in garages and covered walkways to create a safe, well-lit path. They’re also known as canopy lights. All are either UL or ETL Listed for use in wet locations. Select a light appearance to match your existing lighting. If you’re not sure what temperature you need, choose a light with a selectable light appearance. You can adjust the temperature with a switch.

Fasten these lights to a ceiling or to an outlet box. Styles A-C can also be suspended like a pendant from conduit.

Styles B and D illuminate both the ceiling and the ground, so your space feels brighter and larger. When replacing older fixtures, use a mounting plate (sold separately) to cover any hole larger than the dimensions of the new fixture.

Lights with a light sensor automatically turn on in low light conditions. Lights with a motion sensor stay dim until movement is detected, saving energy. When adding a motion sensor to a light that doesn’t already have one, you’ll also need a remote (sold separately). Use the remote to set the motion sensor’s reach and adjust how much darkness triggers the light sensor.

Lights rated IP65 are sealed to keep out dust and driving rain.

Bring light to your parking lot or walkway in minutes—these lights come wired and already attached to a lightweight pole. All you have to do is unfold the light head and secure it with a single screw, mount the pole to your existing anchor bolts, and connect them to your power source. The baseplate works with common anchor bolt patterns. If you don’t have existing anchor bolts, set the included ones in concrete.

Once these lights are up and running, a light sensor turns them on at dusk and off at dawn. A motion sensor brightens them when someone walks by at night, and they’ll dim again after 30 minutes of inactivity. Download the free app to your mobile device to adjust the light and motion sensor settings via Bluetooth.

Choose lights with one head for roadways and the edges of parking lots. Choose lights with two heads for the center of parking lots and other large areas.

16 ft. high lights are rated for 3 second wind gusts up to 120 mph per AASHTO specifications. They meet wind zone standards for all inland and U.S. coastal areas except South Florida. 20 ft. high lights are rated for 3 second wind gusts up to 90 mph per AASHTO specifications. They meet inland wind zone standards.

Also known as sconces, these lights are a stylish choice for ambient and accent lighting in hallways and entryways. They’re UL or ETL listed for wet locations, so you can install them outdoors—rain and humidity won’t be a problem. And thanks to their sensor, you can set them to turn on at dusk and off at dawn. All can send light in multiple directions. Sending light upward makes your space feel larger. Adjust the light appearance and brightness with the switch on the power supply.

Style A can focus all their light up or down, or send half their light in both directions. To achieve the lighting effect you want, adjust the beam width. Rated IP65, these lights are sealed against low-pressure washdowns.

Style B send light up and down.

Style C have two light heads you can twist separately to send light up, down, forward, or against the wall.