Auto-Adjusting Low-Profile Hold-Down Toggle Clamps
Hold workpieces of different thicknesses with one clamp. These clamps automatically adjust to compensate for variations in size. The handle secures in a horizontal position for more clearance above the clamp than standard hold-down toggle clamps. They have an open arm, so you can move the holding screw to any position along the arm. The holding capacity stays the same regardless of the holding screw's position. The screw has a nonmarring tip.
Arm | When Clamped | Holding Screws | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Max. Clamping Clearance | For Max. Workpiece Variation | Ht. | Lg. | Opening Angle | O'all Lg. | O'all Ht. | No. of | Tip Material | Thread Size  | Body Material | Each | |
With Open Arm | |||||||||||||
| 450 | 13/16" | 3/4" | 13/16" | 2 1/4" | 90° | 6 9/16" | 1 1/2" | 1 | Plastic | M6 | Steel | 5127A21 | 000000 |
| 700 | 1 9/16" | 1 3/8" | 13/16" | 3" | 90° | 8 9/16" | 1 7/8" | 1 | Plastic | M8 | Steel | 5127A11 | 00000 |
| 700 | 2 3/8" | 1 3/8" | 1 1/2" | 3" | 90° | 8 9/16" | 2 1/2" | 1 | Plastic | M8 | Steel | 5127A12 | 00000 |
Auto-Adjusting Heavy Duty Hold-Down Toggle Clamps
Hold workpieces of slightly different thicknesses with one clamp. These clamps automatically adjust to compensate for imperfections or small inconsistencies on the material’s surface. A highly durable construction with hardened steel pivot pins provides a long service life. Use the clamping arm to hold your workpiece, or drill and tap a hole to add a threaded holding screw (not included).
Arm | When Clamped | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Max. Clamping Clearance | For Max. Workpiece Variation | Ht. | Lg. | Opening Angle | O'all Lg. | O'all Ht. | Body Material | Each | |
With Solid Arm | ||||||||||
| 475 | 1 1/2" | 1/8" | 1 7/16" | 3 1/8" | 80° | 4 5/8" | 5" | Steel | 50215A3 | 0000000 |
| 1,000 | 2 1/4" | 3/16" | 2 3/16" | 3 7/16" | 95° | 6" | 8 1/2" | Steel | 50215A7 | 000000 |
| 1,600 | 2 1/2" | 1/4" | 2 1/2" | 4 5/16" | 80° | 7 3/8" | 9 7/16" | Steel | 50215A9 | 000000 |
Auto-Adjusting Push Toggle Clamps
Hold workpieces of different thicknesses with one clamp. These clamps automatically adjust to compensate for variations in size. They secure when the plunger is fully extended to hold your workpiece from the side. The holding screw has a nonmarring tip.
Plunger | When Clamped | Holding Screws | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | For Max. Workpiece Variation | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | No. Included | Tip Material | Thread Size | Body Material | Each | |
| 450 | 3/8" | 1 1/2" | 7/8" | 11/16" | 5/16" | M6 | 25 mm | 1 7/16" | 7" | 1 | Plastic | M5 | Steel | 5127A22 | 000000 |
| 700 | 5/8" | 3" | 1" | 1" | 15/32" | M8 | 19 mm | 1 13/16" | 9 3/16" | 1 | Plastic | M6 | Steel | 5127A13 | 00000 |