About Nuts, Materials, and Finishes
More
Flush-Mount Press-Fit Nuts for Sheet Metal
![](/prerenderstable/mvPRE/contents/gfx/imagecache/946/94674a515_91cf09d3-b244-4c73-90db-03fab3859fa4@halfx_638044865172215919.png?ver=imagenotfound)
A flat hex head sits flush against the material surface for use in low-clearance applications. Press them into a drilled or punched hole with an installation tool or an arbor press. Installation requires access to both sides of the panel. Made from 18-8 stainless steel, they're chemical resistant and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
Inch
![](/prerenderstable/mvPRE/contents/gfx/imagecache/946/9467al1-i187-rev1671041105-p9@halfx_638066163074818027.png?ver=imagenotfound)
Installed
Flange | Press-Fit Nuts | |||||||
---|---|---|---|---|---|---|---|---|
Thread Size | Drill Bit Size | For Min. Panel Thick. | Wd. | Thick. | Ht. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
4-40 | No. 20 | 0.04" | 3/16" | 0.01" | 0.036" | 25 | 000000000 | 000000 |
4-40 | No. 20 | 0.062" | 3/16" | 0.02" | 0.058" | 25 | 000000000 | 00000 |
4-40 | No. 20 | 0.125" | 3/16" | 0.03" | 0.117" | 10 | 000000000 | 00000 |
6-32 | 13/64" | 0.062" | 1/4" | 0.02" | 0.058" | 25 | 000000000 | 00000 |
6-32 | 13/64" | 0.125" | 1/4" | 0.03" | 0.117" | 25 | 000000000 | 00000 |
8-32 | 17/64" | 0.062" | 5/16" | 0.02" | 0.058" | 25 | 000000000 | 00000 |
8-32 | 17/64" | 0.125" | 5/16" | 0.03" | 0.117" | 10 | 000000000 | 00000 |
10-32 | 17/64" | 0.093" | 5/16" | 0.03" | 0.085" | 25 | 000000000 | 00000 |
10-32 | 17/64" | 0.125" | 5/16" | 0.03" | 0.117" | 25 | 000000000 | 00000 |
1/4"-20 | W | 0.125" | 7/16" | 0.03" | 0.117" | 10 | 000000000 | 0000 |
1/4"-20 | W | 0.187" | 7/16" | 0.03" | 0.177" | 10 | 000000000 | 00000 |
1/4"-20 | W | 0.375" | 7/16" | 0.03" | 0.359" | 10 | 000000000 | 00000 |
Metric
![](/prerenderstable/mvPRE/contents/gfx/imagecache/946/9467al1-i187-rev1671041105-p9@halfx_638066163074818027.png?ver=imagenotfound)
Installed
Thread | Flange | Press-Fit Nuts | |||||||
---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Drill Bit Size | For Min. Panel Thick., mm | Wd., mm | Thick., mm | Ht., mm | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
M2 | 0.4 | 4.4 mm | 1.53 | 4.8 | 0.5 | 1.53 | 10 | 000000000 | 00000 |
M2.5 | 0.45 | 4.4 mm | 1.53 | 4.8 | 0.5 | 1.53 | 25 | 000000000 | 00000 |
M3 | 0.5 | 4.4 mm | 1.53 | 4.8 | 0.5 | 1.53 | 25 | 000000000 | 00000 |
M3 | 0.5 | 4.4 mm | 2.32 | 4.8 | 0.6 | 2.3 | 25 | 000000000 | 00000 |
M4 | 0.7 | 7.4 mm | 1.53 | 7.9 | 0.5 | 1.53 | 10 | 000000000 | 0000 |
M4 | 0.7 | 7.4 mm | 2.32 | 7.9 | 0.6 | 2.3 | 10 | 000000000 | 0000 |
M5 | 0.8 | 7.9 mm | 1.53 | 8.7 | 0.5 | 1.53 | 10 | 000000000 | 0000 |
M5 | 0.8 | 7.9 mm | 2.32 | 8.7 | 0.6 | 2.3 | 10 | 000000000 | 0000 |
M6 | 1 | 8.7 mm | 3.18 | 9.5 | 0.8 | 3.05 | 10 | 000000000 | 00000 |
M6 | 1 | 8.7 mm | 3.96 | 9.5 | 1 | 3.84 | 10 | 000000000 | 00000 |