Filter by
Length
Material
PEM® Part Number
For Material Thickness
Thread Length
Hole Diameter
Base Diameter
Drill Bit Size
RoHS
REACH
DFARS Specialty Metals
Export Control Classification Number (ECCN)
For Minimum Length Between Hole Center and Sheet Edge
Drill Bit Decimal Size Equivalent
Panel Thickness
Press-Fit Studs
 |
Press these studs into a drilled or punched hole with an arbor press or similar pressure tool. Also known as self-clinching studs, ribs under the head hold the stud firmly in place. Length listed is overall length.
Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.
18-8 Stainless Steel—The choice for wet and outdoor environments, these studs resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
Lg. | PEM® Part No. | Thread Lg. | For Min. Material Thk. | For Min. Lg. Between Hole Ctr. and Sheet Edge | For Hole Dia. | Hole Size Tolerance | Drill Bit Size | Base Dia. | Tensile Strength | Hardness | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Zinc-Plated Steel | |||||||||||||||
2-56 | |||||||||||||||
| 1/4" | FH-256-4 | 11/64" | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 44 Ga. | 0.159" | Not Rated | Not Rated | 50 | 93580A541 | 00000 | ||
| 5/16" | FH-256-5 | 15/64" | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 44 Ga. | 0.159" | Not Rated | Not Rated | 50 | 93580A542 | 0000 | ||
| 3/8" | FH-256-6 | 19/64" | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 44 Ga. | 0.159" | Not Rated | Not Rated | 50 | 93580A543 | 0000 | ||
| 1/2" | FH-256-8 | 31/64" | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 44 Ga. | 0.159" | Not Rated | Not Rated | 50 | 93580A544 | 0000 | ||
| 5/8" | FH-256-10 | 35/64" | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 44 Ga. | 0.159" | Not Rated | Not Rated | 50 | 93580A545 | 0000 | ||
| 3/4" | FH-256-12 | 43/64" | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 44 Ga. | 0.159" | Not Rated | Not Rated | 25 | 93580A546 | 0000 | ||
4-40 | |||||||||||||||
| 1/4" | FH-440-4 | 5/32" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 100 | 93580A004 | 0000 | ||
| 5/16" | FH-440-5 | 15/64" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 50 | 93580A547 | 0000 | ||
| 3/8" | FH-440-6 | 9/32" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 100 | 93580A006 | 0000 | ||
| 1/2" | FH-440-8 | 13/32" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 100 | 93580A008 | 0000 | ||
| 5/8" | FH-440-10 | 17/32" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 50 | 93580A010 | 0000 | ||
| 3/4" | FH-440-12 | 43/64" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 50 | 93580A548 | 0000 | ||
| 7/8" | FH-440-14 | 51/64" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 25 | 93580A549 | 0000 | ||
| 1" | FH-440-16 | 59/64" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 25 | 93580A551 | 0000 | ||
| 1 1/4" | FH-440-20 | 1 11/64" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 25 | 93580A552 | 0000 | ||
6-32 | |||||||||||||||
| 1/4" | FH-632-4 | 5/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 100 | 93580A012 | 0000 | ||
| 5/16" | FH-632-5 | 7/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 100 | 93580A014 | 0000 | ||
| 3/8" | FH-632-6 | 9/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 100 | 93580A016 | 0000 | ||
| 1/2" | FH-632-8 | 13/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 100 | 93580A018 | 0000 | ||
| 5/8" | FH-632-10 | 17/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 50 | 93580A020 | 0000 | ||
| 3/4" | FH-632-12 | 21/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 50 | 93580A022 | 0000 | ||
| 7/8" | FH-632-14 | 25/32" | 0.040" | 1/4" | 0.138" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 50 | 93580A553 | 0000 | ||
| 1" | FH-632-16 | 29/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 50 | 93580A024 | 0000 | ||
| 1 1/4" | FH-632-20 | 1 5/32" | 0.040" | 1/4" | 0.138" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 50 | 93580A554 | 0000 | ||
| 1 1/2" | FH-632-24 | 1 13/32" | 0.040" | 1/4" | 0.138" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 25 | 93580A555 | 0000 | ||
8-32 | |||||||||||||||
| 1/4" | FH-832-4 | 5/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.252" | Not Rated | Not Rated | 50 | 93580A112 | 0000 | ||
| 5/16" | FH-832-5 | 7/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.252" | Not Rated | Not Rated | 50 | 93580A114 | 0000 | ||
| 3/8" | FH-832-6 | 9/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.252" | Not Rated | Not Rated | 50 | 93580A116 | 0000 | ||
| 1/2" | FH-832-8 | 13/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.252" | Not Rated | Not Rated | 50 | 93580A118 | 0000 | ||
| 5/8" | FH-832-10 | 17/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.252" | Not Rated | Not Rated | 50 | 93580A122 | 0000 | ||
| 3/4" | FH-832-12 | 21/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.252" | Not Rated | Not Rated | 50 | 93580A124 | 0000 | ||
| 7/8" | FH-832-14 | 25/32" | 0.040" | 9/32" | 0.161" | 0.000" to 0.003" | 20 Ga. | 0.252" | Not Rated | Not Rated | 50 | 93580A556 | 0000 | ||
| 1" | FH-832-16 | 29/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.252" | Not Rated | Not Rated | 50 | 93580A126 | 0000 | ||
| 1 1/4" | FH-832-20 | 1 5/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.252" | Not Rated | Not Rated | 50 | 93580A128 | 0000 | ||
| 1 1/2" | FH-832-24 | 1 13/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.252" | Not Rated | Not Rated | 25 | 93580A130 | 0000 | ||
10-24 | |||||||||||||||
| 5/16" | FH-024-5 | 7/32" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 25 | 93580A557 | 0000 | ||
| 3/8" | FH-024-6 | 17/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 50 | 93580A143 | 0000 | ||
| 1/2" | FH-024-8 | 25/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 50 | 93580A145 | 0000 | ||
| 5/8" | FH-024-10 | 33/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 50 | 93580A147 | 0000 | ||
| 3/4" | FH-024-12 | 41/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 50 | 93580A149 | 0000 | ||
| 7/8" | FH-024-14 | 49/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 50 | 93580A155 | 0000 | ||
| 1" | FH-024-16 | 57/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 50 | 93580A153 | 0000 | ||
| 1 1/4" | FH-024-20 | 1 5/32" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 25 | 93580A558 | 0000 | ||
| 1 1/2" | FH-024-24 | 1 13/32" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 10 | 93580A559 | 0000 | ||
10-32 | |||||||||||||||
| 5/16" | FH-032-5 | 7/32" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 25 | 93580A561 | 0000 | ||
| 3/8" | FH-032-6 | 17/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 50 | 93580A166 | 0000 | ||
| 1/2" | FH-032-8 | 25/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 50 | 93580A168 | 0000 | ||
| 5/8" | FH-032-10 | 33/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 50 | 93580A172 | 0000 | ||
| 3/4" | FH-032-12 | 41/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 50 | 93580A174 | 0000 | ||
| 7/8" | FH-032-14 | 49/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 50 | 93580A175 | 0000 | ||
| 1" | FH-032-16 | 57/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 50 | 93580A176 | 0000 | ||
| 1 1/4" | FH-032-20 | 1 9/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 50 | 93580A178 | 0000 | ||
| 1 1/2" | FH-032-24 | 1 13/32" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 25 | 93580A562 | 0000 | ||
1/4"-20 | |||||||||||||||
| 3/8" | FH-0420-6 | 15/64" | 0.062" | 5/16" | 1/4" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 25 | 93580A563 | 0000 | ||
| 1/2" | FH-0420-8 | 23/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 50 | 93580A187 | 0000 | ||
| 5/8" | FH-0420-10 | 31/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 25 | 93580A189 | 0000 | ||
| 3/4" | FH-0420-12 | 39/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 25 | 93580A191 | 0000 | ||
| 7/8" | FH-0420-14 | 47/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 25 | 93580A192 | 0000 | ||
| 1" | FH-0420-16 | 55/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 25 | 93580A195 | 0000 | ||
| 1 1/8" | FH-0420-18 | 63/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 10 | 93580A197 | 0000 | ||
| 1 1/4" | FH-0420-20 | 1 7/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 25 | 93580A199 | 0000 | ||
| 1 1/2" | FH-0420-24 | 1 23/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 25 | 93580A202 | 0000 | ||
| 2" | FH-0420-32 | 1 55/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 10 | 93580A210 | 0000 | ||
5/16"-18 | |||||||||||||||
| 1/2" | FH-0518-8 | 11/32" | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | N | 0.391" | Not Rated | Not Rated | 10 | 93580A564 | 0000 | ||
| 5/8" | FH-0518-10 | 15/32" | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | N | 0.391" | Not Rated | Not Rated | 25 | 93580A565 | 0000 | ||
| 3/4" | FH-0518-12 | 19/32" | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | N | 0.391" | Not Rated | Not Rated | 25 | 93580A566 | 0000 | ||
| 7/8" | FH-0518-14 | 23/32" | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | N | 0.391" | Not Rated | Not Rated | 10 | 93580A567 | 0000 | ||
| 1" | FH-0518-16 | 27/32" | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | N | 0.391" | Not Rated | Not Rated | 10 | 93580A568 | 0000 | ||
| 1 1/4" | FH-0518-20 | 1 5/64" | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | N | 0.391" | Not Rated | Not Rated | 10 | 93580A325 | 0000 | ||
| 1 1/2" | FH-0518-24 | 1 21/64" | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | N | 0.391" | Not Rated | Not Rated | 10 | 93580A328 | 0000 | ||
M2.5 × 0.45 mm | |||||||||||||||
| 6 mm | FH-M2.5-6 | 4 mm | 1.000 mm | 5.5 mm | 2.5 mm | 0.000 mm to 0.08 mm | 40 Ga. | 4.5 mm | Not Rated | Not Rated | 50 | 93580A569 | 0000 | ||
| 10 mm | FH-M2.5-10 | 8 mm | 1.000 mm | 5.5 mm | 2.5 mm | 0.000 mm to 0.08 mm | 40 Ga. | 4.5 mm | Not Rated | Not Rated | 50 | 93580A572 | 0000 | ||
| 15 mm | FH-M2.5-15 | 13 mm | 1.000 mm | 5.5 mm | 2.5 mm | 0.000 mm to 0.08 mm | 40 Ga. | 4.5 mm | Not Rated | Not Rated | 50 | 93580A574 | 0000 | ||
| 18 mm | FH-M2.5-18 | 16 mm | 1.000 mm | 5.5 mm | 2.5 mm | 0.000 mm to 0.08 mm | 40 Ga. | 4.5 mm | Not Rated | Not Rated | 25 | 93580A575 | 0000 | ||
M3 × 0.5 mm | |||||||||||||||
| 6 mm | FH-M3-6 | 4 mm | 1.000 mm | 5.5 mm | 3 mm | 0.000 mm to 0.08 mm | 3.0 mm | 5 mm | Not Rated | Not Rated | 50 | 93580A576 | 0000 | ||
| 8 mm | FH-M3-8 | 6 mm | 1.000 mm | 5.5 mm | 3 mm | 0.000 mm to 0.08 mm | 3.0 mm | 5 mm | Not Rated | Not Rated | 50 | 93580A577 | 0000 | ||
| 10 mm | FH-M3-10 | 8 mm | 1.000 mm | 5.5 mm | 3 mm | 0.000 mm to 0.08 mm | 3.0 mm | 5 mm | Not Rated | Not Rated | 50 | 93580A578 | 0000 | ||
| 12 mm | FH-M3-12 | 10 mm | 1.000 mm | 5.5 mm | 3 mm | 0.000 mm to 0.08 mm | 3.0 mm | 5 mm | Not Rated | Not Rated | 50 | 93580A579 | 0000 | ||
| 15 mm | FH-M3-15 | 13 mm | 1.000 mm | 5.5 mm | 3 mm | 0.000 mm to 0.08 mm | 3.0 mm | 5 mm | Not Rated | Not Rated | 50 | 93580A581 | 0000 | ||
| 18 mm | FH-M3-18 | 16 mm | 1.000 mm | 5.5 mm | 3 mm | 0.000 mm to 0.08 mm | 3.0 mm | 5 mm | Not Rated | Not Rated | 50 | 93580A582 | 0000 | ||
| 20 mm | FH-M3-20 | 18 mm | 1.000 mm | 5.5 mm | 3 mm | 0.000 mm to 0.08 mm | 3.0 mm | 5 mm | Not Rated | Not Rated | 25 | 93580A583 | 0000 | ||
| 25 mm | FH-M3-25 | 23 mm | 1.000 mm | 5.5 mm | 3 mm | 0.000 mm to 0.08 mm | 3.0 mm | 5 mm | Not Rated | Not Rated | 25 | 93580A584 | 0000 | ||
M3.5 × 0.6 mm | |||||||||||||||
| 8 mm | FH-M3.5-8 | 6 mm | 1.000 mm | 6.5 mm | 3.5 mm | 0.000 mm to 0.08 mm | 3.5 mm | 5.7 mm | Not Rated | Not Rated | 50 | 93580A586 | 0000 | ||
| 10 mm | FH-M3.5-10 | 8 mm | 1.000 mm | 6.5 mm | 3.5 mm | 0.000 mm to 0.08 mm | 3.5 mm | 5.7 mm | Not Rated | Not Rated | 50 | 93580A587 | 0000 | ||
| 12 mm | FH-M3.5-12 | 10 mm | 1.000 mm | 6.5 mm | 3.5 mm | 0.000 mm to 0.08 mm | 3.5 mm | 5.7 mm | Not Rated | Not Rated | 25 | 93580A588 | 0000 | ||
M4 × 0.7 mm | |||||||||||||||
| 6 mm | FH-M4-6 | 4 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 22 Ga. | 6.3 mm | Not Rated | Not Rated | 50 | 93580A589 | 0000 | ||
| 8 mm | FH-M4-8 | 6 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 22 Ga. | 6.3 mm | Not Rated | Not Rated | 50 | 93580A591 | 0000 | ||
| 10 mm | FH-M4-10 | 8 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 22 Ga. | 6.3 mm | Not Rated | Not Rated | 50 | 93580A592 | 0000 | ||
| 12 mm | FH-M4-12 | 10 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 22 Ga. | 6.3 mm | Not Rated | Not Rated | 50 | 93580A593 | 0000 | ||
| 15 mm | FH-M4-15 | 13 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 22 Ga. | 6.3 mm | Not Rated | Not Rated | 50 | 93580A594 | 0000 | ||
| 18 mm | FH-M4-18 | 16 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 22 Ga. | 6.3 mm | Not Rated | Not Rated | 50 | 93580A595 | 0000 | ||
| 20 mm | FH-M4-20 | 18 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 22 Ga. | 6.3 mm | Not Rated | Not Rated | 50 | 93580A596 | 0000 | ||
| 25 mm | FH-M4-25 | 23 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 22 Ga. | 6.3 mm | Not Rated | Not Rated | 50 | 93580A597 | 0000 | ||
| 30 mm | FH-M4-30 | 28 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 22 Ga. | 6.3 mm | Not Rated | Not Rated | 25 | 93580A598 | 0000 | ||
| 35 mm | FH-M4-35 | 33 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 22 Ga. | 6.3 mm | Not Rated | Not Rated | 25 | 93580A599 | 0000 | ||
M5 × 0.8 mm | |||||||||||||||
| 8 mm | FH-M5-8 | 5 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.9 mm | Not Rated | Not Rated | 25 | 93580A601 | 0000 | ||
| 10 mm | FH-M5-10 | 7 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.9 mm | Not Rated | Not Rated | 50 | 93580A602 | 0000 | ||
| 12 mm | FH-M5-12 | 9 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.9 mm | Not Rated | Not Rated | 50 | 93580A603 | 0000 | ||
| 15 mm | FH-M5-15 | 12 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.9 mm | Not Rated | Not Rated | 50 | 93580A604 | 0000 | ||
| 18 mm | FH-M5-18 | 15 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.9 mm | Not Rated | Not Rated | 50 | 93580A605 | 0000 | ||
| 20 mm | FH-M5-20 | 17 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.9 mm | Not Rated | Not Rated | 50 | 93580A606 | 0000 | ||
| 25 mm | FH-M5-25 | 22 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.9 mm | Not Rated | Not Rated | 50 | 93580A607 | 0000 | ||
| 30 mm | FH-M5-30 | 27 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.9 mm | Not Rated | Not Rated | 25 | 93580A608 | 0000 | ||
| 35 mm | FH-M5-35 | 32 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.9 mm | Not Rated | Not Rated | 10 | 93580A609 | 0000 | ||
M6 × 1 mm | |||||||||||||||
| 10 mm | FH-M6-10 | 7 mm | 1.600 mm | 8 mm | 6 mm | 0.000 mm to 0.08 mm | 6.0 mm | 8.6 mm | Not Rated | Not Rated | 25 | 93580A611 | 0000 | ||
| 12 mm | FH-M6-12 | 9 mm | 1.600 mm | 8 mm | 6 mm | 0.000 mm to 0.08 mm | 6.0 mm | 8.6 mm | Not Rated | Not Rated | 25 | 93580A612 | 0000 | ||
| 15 mm | FH-M6-15 | 12 mm | 1.600 mm | 8 mm | 6 mm | 0.000 mm to 0.08 mm | 6.0 mm | 8.6 mm | Not Rated | Not Rated | 25 | 93580A613 | 0000 | ||
| 18 mm | FH-M6-18 | 15 mm | 1.600 mm | 8 mm | 6 mm | 0.000 mm to 0.08 mm | 6.0 mm | 8.6 mm | Not Rated | Not Rated | 25 | 93580A614 | 0000 | ||
| 20 mm | FH-M6-20 | 17 mm | 1.600 mm | 8 mm | 6 mm | 0.000 mm to 0.08 mm | 6.0 mm | 8.6 mm | Not Rated | Not Rated | 25 | 93580A615 | 0000 | ||
| 25 mm | FH-M6-25 | 22 mm | 1.600 mm | 8 mm | 6 mm | 0.000 mm to 0.08 mm | 6.0 mm | 8.6 mm | Not Rated | Not Rated | 25 | 93580A616 | 0000 | ||
| 30 mm | FH-M6-30 | 27 mm | 1.600 mm | 8 mm | 6 mm | 0.000 mm to 0.08 mm | 6.0 mm | 8.6 mm | Not Rated | Not Rated | 25 | 93580A617 | 0000 | ||
| 35 mm | FH-M6-35 | 32 mm | 1.600 mm | 8 mm | 6 mm | 0.000 mm to 0.08 mm | 6.0 mm | 8.6 mm | Not Rated | Not Rated | 10 | 93580A618 | 0000 | ||
M8 × 1.25 mm | |||||||||||||||
| 12 mm | FH-M8-12 | 8 mm | 2.400 mm | 9.5 mm | 8 mm | 0.000 mm to 0.08 mm | 8.0 mm | 10 mm | Not Rated | Not Rated | 10 | 93580A619 | 0000 | ||
| 15 mm | FH-M8-15 | 11 mm | 2.400 mm | 9.5 mm | 8 mm | 0.000 mm to 0.08 mm | 8.0 mm | 10 mm | Not Rated | Not Rated | 25 | 93580A621 | 0000 | ||
| 20 mm | FH-M8-20 | 16 mm | 2.400 mm | 9.5 mm | 8 mm | 0.000 mm to 0.08 mm | 8.0 mm | 10 mm | Not Rated | Not Rated | 10 | 93580A622 | 0000 | ||
| 25 mm | FH-M8-25 | 21 mm | 2.400 mm | 9.5 mm | 8 mm | 0.000 mm to 0.08 mm | 8.0 mm | 10 mm | Not Rated | Not Rated | 10 | 93580A623 | 0000 | ||
| 30 mm | FH-M8-30 | 26 mm | 2.400 mm | 9.5 mm | 8 mm | 0.000 mm to 0.08 mm | 8.0 mm | 10 mm | Not Rated | Not Rated | 10 | 93580A624 | 0000 | ||
| 35 mm | FH-M8-35 | 31 mm | 2.400 mm | 9.5 mm | 8 mm | 0.000 mm to 0.08 mm | 8.0 mm | 10 mm | Not Rated | Not Rated | 10 | 93580A626 | 0000 | ||
18-8 Stainless Steel | |||||||||||||||
2-56 | |||||||||||||||
| 1/4" | FHS-256-4 | 5/32" | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 44 Ga. | 0.129" | Not Rated | Not Rated | 50 | 93580A641 | 0000 | ||
| 5/16" | FHS-256-5 | 7/32" | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 44 Ga. | 0.129" | Not Rated | Not Rated | 50 | 93580A642 | 0000 | ||
| 3/8" | FHS-256-6 | 5/16" | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 44 Ga. | 0.129" | Not Rated | Not Rated | 50 | 93580A643 | 0000 | ||
| 1/2" | FHS-256-8 | 27/64" | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 44 Ga. | 0.129" | Not Rated | Not Rated | 25 | 93580A644 | 0000 | ||
| 5/8" | FHS-256-10 | 35/64" | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 44 Ga. | 0.129" | Not Rated | Not Rated | 25 | 93580A645 | 0000 | ||
| 3/4" | FHS-256-12 | 43/64" | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 44 Ga. | 0.129" | Not Rated | Not Rated | 10 | 93580A646 | 0000 | ||
4-40 | |||||||||||||||
| 1/4" | FHS-440-4 | 5/32" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 50 | 93580A647 | 0000 | ||
| 5/16" | FHS-440-5 | 7/32" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 50 | 93580A648 | 0000 | ||
| 3/8" | FHS-440-6 | 9/32" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 50 | 93580A115 | 0000 | ||
| 1/2" | FHS-440-8 | 13/32" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 50 | 93580A120 | 0000 | ||
| 5/8" | FHS-440-10 | 35/64" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 25 | 93580A649 | 0000 | ||
| 3/4" | FHS-440-12 | 21/32" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 25 | 93580A651 | 0000 | ||
| 7/8" | FHS-440-14 | 51/64" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 10 | 93580A652 | 0000 | ||
| 1" | FHS-440-16 | 29/32" | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 34 Ga. | 0.191" | Not Rated | Not Rated | 10 | 93580A653 | 0000 | ||
6-32 | |||||||||||||||
| 1/4" | FHS-632-4 | 5/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 50 | 93580A654 | 0000 | ||
| 5/16" | FHS-632-5 | 7/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 50 | 93580A655 | 0000 | ||
| 3/8" | FHS-632-6 | 9/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 25 | 93580A215 | 0000 | ||
| 1/2" | FHS-632-8 | 13/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 25 | 93580A220 | 0000 | ||
| 5/8" | FHS-632-10 | 17/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 25 | 93580A225 | 0000 | ||
| 3/4" | FHS-632-12 | 21/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 25 | 93580A230 | 0000 | ||
| 7/8" | FHS-632-14 | 25/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 25 | 93580A656 | 0000 | ||
| 1" | FHS-632-16 | 29/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 25 | 93580A240 | 0000 | ||
| 1 1/4" | FHS-632-20 | 1 5/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 25 | 93580A657 | 0000 | ||
| 1 1/2" | FHS-632-24 | 1 13/32" | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 3.5 mm | 0.221" | Not Rated | Not Rated | 10 | 93580A658 | 0000 | ||
8-32 | |||||||||||||||
| 1/4" | FHS-832-4 | 5/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.222" | Not Rated | Not Rated | 50 | 93580A659 | 0000 | ||
| 5/16" | FHS-832-5 | 7/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.222" | Not Rated | Not Rated | 50 | 93580A661 | 0000 | ||
| 3/8" | FHS-832-6 | 9/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.252" | Not Rated | Not Rated | 25 | 93580A415 | 0000 | ||
| 1/2" | FHS-832-8 | 13/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.252" | Not Rated | Not Rated | 25 | 93580A420 | 0000 | ||
| 5/8" | FHS-832-10 | 17/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.252" | Not Rated | Not Rated | 25 | 93580A425 | 0000 | ||
| 3/4" | FHS-832-12 | 21/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.252" | Not Rated | Not Rated | 25 | 93580A430 | 0000 | ||
| 7/8" | FHS-832-14 | 25/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.222" | Not Rated | Not Rated | 25 | 93580A662 | 0000 | ||
| 1" | FHS-832-16 | 29/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.252" | Not Rated | Not Rated | 25 | 93580A440 | 0000 | ||
| 1 1/4" | FHS-832-20 | 1 5/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.222" | Not Rated | Not Rated | 25 | 93580A663 | 0000 | ||
| 1 1/2" | FHS-832-24 | 1 13/32" | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 20 Ga. | 0.222" | Not Rated | Not Rated | 10 | 93580A664 | 0000 | ||
10-24 | |||||||||||||||
| 3/8" | FHS-024-6 | 9/32" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.241" | Not Rated | Not Rated | 25 | 93580A665 | 0000 | ||
| 1/2" | FHS-024-8 | 13/32" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.241" | Not Rated | Not Rated | 25 | 93580A666 | 0000 | ||
| 5/8" | FHS-024-10 | 33/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.241" | Not Rated | Not Rated | 25 | 93580A667 | 0000 | ||
| 3/4" | FHS-024-12 | 21/32" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.241" | Not Rated | Not Rated | 25 | 93580A668 | 0000 | ||
| 7/8" | FHS-024-14 | 49/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.241" | Not Rated | Not Rated | 25 | 93580A669 | 0000 | ||
| 1" | FHS-024-16 | 29/32" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.241" | Not Rated | Not Rated | 25 | 93580A671 | 0000 | ||
| 1 1/4" | FHS-024-20 | 1 5/32" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.241" | Not Rated | Not Rated | 10 | 93580A672 | 0000 | ||
| 1 1/2" | FHS-024-24 | 1 13/32" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.241" | Not Rated | Not Rated | 10 | 93580A673 | 0000 | ||
10-32 | |||||||||||||||
| 5/16" | FHS-032-5 | 7/32" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 25 | 93580A674 | 0000 | ||
| 3/8" | FHS-032-6 | 9/32" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 25 | 93580A675 | 0000 | ||
| 1/2" | FHS-032-8 | 25/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 25 | 93580A520 | 0000 | ||
| 5/8" | FHS-032-10 | 33/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 25 | 93580A525 | 0000 | ||
| 3/4" | FHS-032-12 | 41/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 25 | 93580A530 | 0000 | ||
| 7/8" | FHS-032-14 | 49/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 25 | 93580A676 | 0000 | ||
| 1" | FHS-032-16 | 57/64" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 25 | 93580A540 | 0000 | ||
| 1 1/4" | FHS-032-20 | 1 5/32" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 10 | 93580A677 | 0000 | ||
| 1 1/2" | FHS-032-24 | 1 13/32" | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 12 Ga. | 0.271" | Not Rated | Not Rated | 10 | 93580A678 | 0000 | ||
1/4"-20 | |||||||||||||||
| 3/8" | FHS-0420-6 | 15/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 10 | 93580A679 | 0000 | ||
| 1/2" | FHS-0420-8 | 23/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 10 | 93580A625 | 0000 | ||
| 5/8" | FHS-0420-10 | 31/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 25 | 93580A620 | 0000 | ||
| 3/4" | FHS-0420-12 | 39/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 10 | 93580A630 | 0000 | ||
| 7/8" | FHS-0420-14 | 47/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 10 | 93580A681 | 0000 | ||
| 1" | FHS-0420-16 | 55/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 10 | 93580A635 | 0000 | ||
| 1 1/4" | FHS-0420-20 | 1 7/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 10 | 93580A682 | 0000 | ||
| 1 1/2" | FHS-0420-24 | 1 23/64" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 1/4" | 0.352" | Not Rated | Not Rated | 10 | 93580A640 | 0000 | ||
5/16"-18 | |||||||||||||||
| 1/2" | FHS-0518 -8 | 11/32" | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | N | 0.361" | Not Rated | Not Rated | 10 | 93580A683 | 0000 | ||
| 5/8" | FHS-0518-10 | 15/32" | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | N | 0.361" | Not Rated | Not Rated | 10 | 93580A684 | 0000 | ||
| 3/4" | FHS-0518-12 | 19/32" | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | N | 0.361" | Not Rated | Not Rated | 10 | 93580A685 | 0000 | ||
| 7/8" | FHS-0518-14 | 23/32" | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | N | 0.361" | Not Rated | Not Rated | 10 | 93580A686 | 0000 | ||
| 1" | FHS-0518-16 | 27/32" | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | N | 0.361" | Not Rated | Not Rated | 10 | 93580A687 | 0000 | ||
| 1 1/4" | FHS-0518-20 | 1 3/32" | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | N | 0.361" | Not Rated | Not Rated | 5 | 93580A688 | 0000 | ||
| 1 1/2" | FHS-0518-24 | 1 11/32" | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | N | 0.361" | Not Rated | Not Rated | 5 | 93580A689 | 0000 | ||
M2.5 × 0.45 mm | |||||||||||||||
| 6 mm | FHS-M2.5-6 | 4 mm | 1.000 mm | 5 mm | 2.5 mm | 0.000 mm to 0.08 mm | 2.5 mm | 3.7 mm | Not Rated | Not Rated | 25 | 93580A691 | 0000 | ||
| 8 mm | FHS-M2.5-8 | 6 mm | 1.000 mm | 5 mm | 2.5 mm | 0.000 mm to 0.08 mm | 2.5 mm | 3.7 mm | Not Rated | Not Rated | 25 | 93580A692 | 0000 | ||
| 10 mm | FHS-M2.5-10 | 8 mm | 1.000 mm | 5 mm | 2.5 mm | 0.000 mm to 0.08 mm | 2.5 mm | 3.7 mm | Not Rated | Not Rated | 25 | 93580A693 | 0000 | ||
| 12 mm | FHS-M2.5-12 | 10 mm | 1.000 mm | 5 mm | 2.5 mm | 0.000 mm to 0.08 mm | 2.5 mm | 3.7 mm | Not Rated | Not Rated | 25 | 93580A694 | 0000 | ||
| 15 mm | FHS-M2.5-15 | 13 mm | 1.000 mm | 5 mm | 2.5 mm | 0.000 mm to 0.08 mm | 2.5 mm | 3.7 mm | Not Rated | Not Rated | 25 | 93580A801 | 0000 | ||
M3 × 0.5 mm | |||||||||||||||
| 6 mm | FHS-M3-6 | 4 mm | 1.000 mm | 5.5 mm | 3 mm | 0.000 mm to 0.08 mm | 3.0 mm | 4.2 mm | Not Rated | Not Rated | 25 | 93580A695 | 0000 | ||
| 8 mm | FHS-M3-8 | 6 mm | 1.000 mm | 5.5 mm | 3 mm | 0.000 mm to 0.08 mm | 3.0 mm | 4.2 mm | Not Rated | Not Rated | 25 | 93580A696 | 0000 | ||
| 10 mm | FHS-M3-10 | 8 mm | 1.000 mm | 5.5 mm | 3 mm | 0.000 mm to 0.08 mm | 3.0 mm | 4.2 mm | Not Rated | Not Rated | 50 | 93580A697 | 0000 | ||
| 12 mm | FHS-M3-12 | 10 mm | 1.000 mm | 5.5 mm | 3 mm | 0.000 mm to 0.08 mm | 3.0 mm | 4.2 mm | Not Rated | Not Rated | 25 | 93580A698 | 0000 | ||
| 15 mm | FHS-M3-15 | 13 mm | 1.000 mm | 5.5 mm | 3 mm | 0.000 mm to 0.08 mm | 3.0 mm | 4.2 mm | Not Rated | Not Rated | 25 | 93580A699 | 0000 | ||
| 18 mm | FHS-M3-18 | 16 mm | 1.000 mm | 5.5 mm | 3 mm | 0.000 mm to 0.08 mm | 3.0 mm | 4.2 mm | Not Rated | Not Rated | 25 | 93580A701 | 0000 | ||
| 20 mm | FHS-M3-20 | 18 mm | 1.000 mm | 5.5 mm | 3 mm | 0.000 mm to 0.08 mm | 3.0 mm | 4.2 mm | Not Rated | Not Rated | 10 | 93580A702 | 0000 | ||
| 25 mm | FHS-M3-25 | 23 mm | 1.000 mm | 5.5 mm | 3 mm | 0.000 mm to 0.08 mm | 3.0 mm | 4.2 mm | Not Rated | Not Rated | 10 | 93580A703 | 0000 | ||
M4 × 0.7 mm | |||||||||||||||
| 6 mm | FHS-M4-6 | 4 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 4.0 mm | 5.5 mm | Not Rated | Not Rated | 25 | 93580A802 | 0000 | ||
| 8 mm | FHS-M4-8 | 6 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 4.0 mm | 5.5 mm | Not Rated | Not Rated | 25 | 93580A704 | 0000 | ||
| 10 mm | FHS-M4-10 | 8 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 4.0 mm | 5.5 mm | Not Rated | Not Rated | 25 | 93580A705 | 0000 | ||
| 12 mm | FHS-M4-12 | 10 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 4.0 mm | 5.5 mm | Not Rated | Not Rated | 25 | 93580A706 | 0000 | ||
| 15 mm | FHS-M4-15 | 13 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 4.0 mm | 5.5 mm | Not Rated | Not Rated | 25 | 93580A707 | 0000 | ||
| 18 mm | FHS-M4-18 | 16 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 4.0 mm | 5.5 mm | Not Rated | Not Rated | 25 | 93580A708 | 0000 | ||
| 20 mm | FHS-M4-20 | 18 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 4.0 mm | 5.5 mm | Not Rated | Not Rated | 25 | 93580A709 | 0000 | ||
| 25 mm | FHS-M4-25 | 23 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 4.0 mm | 5.5 mm | Not Rated | Not Rated | 25 | 93580A711 | 0000 | ||
| 35 mm | FHS-M4-35 | 33 mm | 1.000 mm | 7 mm | 4 mm | 0.000 mm to 0.08 mm | 4.0 mm | 5.5 mm | Not Rated | Not Rated | 10 | 93580A712 | 0000 | ||
M5 × 0.8 mm | |||||||||||||||
| 8 mm | FHS-M5-8 | 5 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.1 mm | Not Rated | Not Rated | 10 | 93580A713 | 0000 | ||
| 10 mm | FHS-M5-10 | 7 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.1 mm | Not Rated | Not Rated | 25 | 93580A714 | 0000 | ||
| 12 mm | FHS-M5-12 | 9 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.1 mm | Not Rated | Not Rated | 25 | 93580A715 | 0000 | ||
| 15 mm | FHS-M5-15 | 12 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.1 mm | Not Rated | Not Rated | 25 | 93580A716 | 0000 | ||
| 18 mm | FHS-M5-18 | 15 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.1 mm | Not Rated | Not Rated | 25 | 93580A717 | 0000 | ||
| 20 mm | FHS-M5-20 | 17 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.1 mm | Not Rated | Not Rated | 25 | 93580A718 | 0000 | ||
| 25 mm | FHS-M5-25 | 22 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.1 mm | Not Rated | Not Rated | 25 | 93580A719 | 0000 | ||
| 30 mm | FHS-M5-30 | 27 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.1 mm | Not Rated | Not Rated | 10 | 93580A721 | 0000 | ||
| 35 mm | FHS-M5-35 | 32 mm | 1.000 mm | 7 mm | 5 mm | 0.000 mm to 0.08 mm | 5.0 mm | 6.1 mm | Not Rated | Not Rated | 10 | 93580A803 | 0000 | ||
M6 × 1 mm | |||||||||||||||
| 10 mm | FHS-M6-10 | 7 mm | 1.600 mm | 8 mm | 6 mm | 0.000 mm to 0.08 mm | 6.0 mm | 7.8 mm | Not Rated | Not Rated | 25 | 93580A722 | 0000 | ||
| 12 mm | FHS-M6-12 | 9 mm | 1.600 mm | 8 mm | 6 mm | 0.000 mm to 0.08 mm | 6.0 mm | 7.8 mm | Not Rated | Not Rated | 10 | 93580A723 | 0000 | ||
| 15 mm | FHS-M6-15 | 12 mm | 1.600 mm | 8 mm | 6 mm | 0.000 mm to 0.08 mm | 6.0 mm | 7.8 mm | Not Rated | Not Rated | 10 | 93580A724 | 0000 | ||
| 18 mm | FHS-M6-18 | 15 mm | 1.600 mm | 8 mm | 6 mm | 0.000 mm to 0.08 mm | 6.0 mm | 7.8 mm | Not Rated | Not Rated | 10 | 93580A725 | 0000 | ||
| 20 mm | FHS-M6-20 | 17 mm | 1.600 mm | 8 mm | 6 mm | 0.000 mm to 0.08 mm | 6.0 mm | 7.8 mm | Not Rated | Not Rated | 10 | 93580A726 | 0000 | ||
| 25 mm | FHS-M6-25 | 22 mm | 1.600 mm | 8 mm | 6 mm | 0.000 mm to 0.08 mm | 6.0 mm | 7.8 mm | Not Rated | Not Rated | 10 | 93580A727 | 0000 | ||
| 30 mm | FHS-M6-30 | 27 mm | 1.600 mm | 8 mm | 6 mm | 0.000 mm to 0.08 mm | 6.0 mm | 7.8 mm | Not Rated | Not Rated | 10 | 93580A728 | 0000 | ||
| 35 mm | FHS-M6-35 | 32 mm | 1.600 mm | 8 mm | 6 mm | 0.000 mm to 0.08 mm | 6.0 mm | 7.8 mm | Not Rated | Not Rated | 10 | 93580A729 | 0000 | ||
M8 × 1.25 mm | |||||||||||||||
| 15 mm | FHS-M8-15 | 11 mm | 2.400 mm | 9.5 mm | 8 mm | 0.000 mm to 0.08 mm | 8.0 mm | 9.2 mm | Not Rated | Not Rated | 10 | 93580A804 | 0000 | ||
| 18 mm | FHS-M8-18 | 14 mm | 2.400 mm | 9.5 mm | 8 mm | 0.000 mm to 0.08 mm | 8.0 mm | 9.2 mm | Not Rated | Not Rated | 10 | 93580A805 | 0000 | ||
| 20 mm | FHS-M8-20 | 16 mm | 2.400 mm | 9.5 mm | 8 mm | 0.000 mm to 0.08 mm | 8.0 mm | 9.2 mm | Not Rated | Not Rated | 10 | 93580A731 | 0000 | ||
| 25 mm | FHS-M8-25 | 21 mm | 2.400 mm | 9.5 mm | 8 mm | 0.000 mm to 0.08 mm | 8.0 mm | 9.2 mm | Not Rated | Not Rated | 10 | 93580A732 | 0000 | ||
| 30 mm | FHS-M8-30 | 26 mm | 2.400 mm | 9.5 mm | 8 mm | 0.000 mm to 0.08 mm | 8.0 mm | 9.2 mm | Not Rated | Not Rated | 5 | 93580A806 | 0000 | ||
Captive Pins
 |
Lg. | Dia. Tolerance | PEM® Series No. | PEM® Part No. | For Min. Panel Thk. | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|
18-8 Stainless Steel | |||||||||
1/8" Diameter | |||||||||
| 3/8" | -0.002" to 0.002" | TPS | TPS-125-6 | 0.04" | 50 | 95648A400 | 000000 | ||
| 1/2" | -0.002" to 0.002" | TPS | TPS-125-8 | 0.04" | 50 | 95648A410 | 00000 | ||
| 5/8" | -0.002" to 0.002" | TPS | TPS-125-10 | 0.04" | 50 | 95648A420 | 00000 | ||
| 3/4" | -0.002" to 0.002" | TPS | TPS-125-12 | 0.04" | 25 | 95648A727 | 0000 | ||
3/16" Diameter | |||||||||
| 3/8" | -0.002" to 0.002" | TPS | TPS-187-6 | 0.04" | 25 | 95648A530 | 0000 | ||
| 1/2" | -0.002" to 0.002" | TPS | TPS-187-8 | 0.04" | 25 | 95648A540 | 0000 | ||
| 5/8" | -0.002" to 0.002" | TPS | TPS-187-10 | 0.04" | 25 | 95648A550 | 0000 | ||
| 3/4" | -0.002" to 0.002" | TPS | TPS-187-12 | 0.04" | 25 | 95648A681 | 0000 | ||
| 1" | -0.002" to 0.002" | TPS | TPS-187-16 | 0.04" | 25 | 95648A682 | 00000 | ||
1/4" Diameter | |||||||||
| 1/2" | -0.002" to 0.002" | TPS | TPS-250-8 | 0.04" | 25 | 95648A660 | 0000 | ||
| 5/8" | -0.002" to 0.002" | TPS | TPS-250-10 | 0.04" | 25 | 95648A670 | 00000 | ||
| 3/4" | -0.002" to 0.002" | TPS | TPS-250-12 | 0.04" | 10 | 95648A680 | 0000 | ||
| 1" | -0.002" to 0.002" | TPS | TPS-250-16 | 0.04" | 25 | 95648A683 | 00000 | ||
3 mm Diameter | |||||||||
| 8 mm | -0.05 mm to 0.05 mm | TPS | TPS-3MM-8 | 1 mm | 25 | 95648A697 | 0000 | ||
| 10 mm | -0.05 mm to 0.05 mm | TPS | TPS-3MM-10 | 1 mm | 25 | 95648A698 | 0000 | ||
| 12 mm | -0.05 mm to 0.05 mm | TPS | TPS-3MM-12 | 1 mm | 25 | 95648A699 | 0000 | ||
| 16 mm | -0.05 mm to 0.05 mm | TPS | TPS-3MM-16 | 1 mm | 25 | 95648A700 | 0000 | ||
4 mm Diameter | |||||||||
| 8 mm | -0.05 mm to 0.05 mm | TPS | TPS-4MM-8 | 1 mm | 25 | 95648A701 | 0000 | ||
| 10 mm | -0.05 mm to 0.05 mm | TPS | TPS-4MM-10 | 1 mm | 25 | 95648A702 | 0000 | ||
| 12 mm | -0.05 mm to 0.05 mm | TPS | TPS-4MM-12 | 1 mm | 25 | 95648A703 | 0000 | ||
| 16 mm | -0.05 mm to 0.05 mm | TPS | TPS-4MM-16 | 1 mm | 25 | 95648A704 | 0000 | ||
5 mm Diameter | |||||||||
| 10 mm | -0.05 mm to 0.05 mm | TPS | TPS-5MM-10 | 1 mm | 25 | 95648A705 | 0000 | ||
| 12 mm | -0.05 mm to 0.05 mm | TPS | TPS-5MM-12 | 1 mm | 25 | 95648A706 | 0000 | ||
| 16 mm | -0.05 mm to 0.05 mm | TPS | TPS-5MM-16 | 1 mm | 25 | 95648A707 | 0000 | ||
| 20 mm | -0.05 mm to 0.05 mm | TPS | TPS-5MM-20 | 1 mm | 25 | 95648A708 | 00000 | ||
6 mm Diameter | |||||||||
| 12 mm | -0.05 mm to 0.05 mm | TPS | TPS-6MM-12 | 1 mm | 25 | 95648A709 | 0000 | ||
| 16 mm | -0.05 mm to 0.05 mm | TPS | TPS-6MM-16 | 1 mm | 25 | 95648A710 | 00000 | ||
| 20 mm | -0.05 mm to 0.05 mm | TPS | TPS-6MM-20 | 1 mm | 25 | 95648A711 | 00000 | ||
400 Series Stainless Steel | |||||||||
1/8" Diameter | |||||||||
| 3/8" | -0.002" to 0.002" | TP4 | TP4-125-6 | 0.04" | 25 | 95648A684 | 0000 | ||
| 1/2" | -0.002" to 0.002" | TP4 | TP4-125-8 | 0.04" | 25 | 95648A685 | 0000 | ||
| 5/8" | -0.002" to 0.002" | TP4 | TP4-125-10 | 0.04" | 25 | 95648A686 | 0000 | ||
| 3/4" | -0.002" to 0.002" | TP4 | TP4-125-12 | 0.04" | 25 | 95648A687 | 0000 | ||
3/16" Diameter | |||||||||
| 3/8" | -0.002" to 0.002" | TP4 | TP4-187-6 | 0.04" | 25 | 95648A688 | 0000 | ||
| 1/2" | -0.002" to 0.002" | TP4 | TP4-187-8 | 0.04" | 25 | 95648A689 | 0000 | ||
| 5/8" | -0.002" to 0.002" | TP4 | TP4-187-10 | 0.04" | 25 | 95648A690 | 00000 | ||
| 3/4" | -0.002" to 0.002" | TP4 | TP4-187-12 | 0.04" | 25 | 95648A691 | 00000 | ||
| 1" | -0.002" to 0.002" | TP4 | TP4-187-16 | 0.04" | 25 | 95648A692 | 00000 | ||
1/4" Diameter | |||||||||
| 1/2" | -0.002" to 0.002" | TP4 | TP4-250-8 | 0.04" | 25 | 95648A693 | 00000 | ||
| 5/8" | -0.002" to 0.002" | TP4 | TP4-250-10 | 0.04" | 25 | 95648A694 | 00000 | ||
| 3/4" | -0.002" to 0.002" | TP4 | TP4-250-12 | 0.04" | 25 | 95648A695 | 00000 | ||
| 1" | -0.002" to 0.002" | TP4 | TP4-250-16 | 0.04" | 25 | 95648A696 | 00000 | ||
3 mm Diameter | |||||||||
| 8 mm | -0.05 mm to 0.05 mm | TP4 | TP4-3MM-8 | 1 mm | 25 | 95648A712 | 0000 | ||
| 10 mm | -0.05 mm to 0.05 mm | TP4 | TP4-3MM-10 | 1 mm | 25 | 95648A713 | 0000 | ||
| 12 mm | -0.05 mm to 0.05 mm | TP4 | TP4-3MM-12 | 1 mm | 25 | 95648A714 | 0000 | ||
| 16 mm | -0.05 mm to 0.05 mm | TP4 | TP4-3MM-16 | 1 mm | 25 | 95648A715 | 0000 | ||
4 mm Diameter | |||||||||
| 8 mm | -0.05 mm to 0.05 mm | TP4 | TP4-4MM-8 | 1 mm | 25 | 95648A716 | 0000 | ||
| 10 mm | -0.05 mm to 0.05 mm | TP4 | TP4-4MM-10 | 1 mm | 25 | 95648A717 | 0000 | ||
| 12 mm | -0.05 mm to 0.05 mm | TP4 | TP4-4MM-12 | 1 mm | 25 | 95648A718 | 0000 | ||
| 16 mm | -0.05 mm to 0.05 mm | TP4 | TP4-4MM-16 | 1 mm | 25 | 95648A719 | 0000 | ||
5 mm Diameter | |||||||||
| 10 mm | -0.05 mm to 0.05 mm | TP4 | TP4-5MM-10 | 1 mm | 25 | 95648A720 | 0000 | ||
| 12 mm | -0.05 mm to 0.05 mm | TP4 | TP4-5MM-12 | 1 mm | 25 | 95648A721 | 00000 | ||
| 16 mm | -0.05 mm to 0.05 mm | TP4 | TP4-5MM-16 | 1 mm | 25 | 95648A722 | 00000 | ||
| 20 mm | -0.05 mm to 0.05 mm | TP4 | TP4-5MM-20 | 1 mm | 25 | 95648A723 | 00000 | ||
6 mm Diameter | |||||||||
| 12 mm | -0.05 mm to 0.05 mm | TP4 | TP4-6MM-12 | 1 mm | 25 | 95648A724 | 00000 | ||
| 16 mm | -0.05 mm to 0.05 mm | TP4 | TP4-6MM-16 | 1 mm | 25 | 95648A725 | 00000 | ||
| 20 mm | -0.05 mm to 0.05 mm | TP4 | TP4-6MM-20 | 1 mm | 25 | 95648A726 | 00000 | ||
A286 Stainless Steel | |||||||||
1 mm Diameter | |||||||||
| 2 mm | -0.038 mm to 0.038 mm | MPP | MPP-1MM-2 | 0.5 mm | 25 | 95648A110 | 00000 | ||
| 3 mm | -0.038 mm to 0.038 mm | MPP | MPP-1MM-3 | 0.5 mm | 25 | 95648A120 | 00000 | ||
| 4 mm | -0.038 mm to 0.038 mm | MPP | MPP-1MM-4 | 0.5 mm | 25 | 95648A130 | 00000 | ||
| 5 mm | -0.038 mm to 0.038 mm | MPP | MPP-1MM-5 | 0.5 mm | 25 | 95648A140 | 00000 | ||
1.5 mm Diameter | |||||||||
| 3 mm | -0.038 mm to 0.038 mm | MPP | MPP-1.5MM-3 | 0.5 mm | 25 | 95648A250 | 00000 | ||
| 4 mm | -0.038 mm to 0.038 mm | MPP | MPP-1.5MM-4 | 0.5 mm | 25 | 95648A260 | 00000 | ||
| 5 mm | -0.038 mm to 0.038 mm | MPP | MPP-1.5MM-5 | 0.5 mm | 25 | 95648A270 | 00000 | ||
| 6 mm | -0.038 mm to 0.038 mm | MPP | MPP-1.5MM-6 | 0.5 mm | 25 | 95648A280 | 00000 | ||
| 8 mm | -0.038 mm to 0.038 mm | MPP | MPP-1.5MM-8 | 0.5 mm | 25 | 95648A290 | 00000 | ||
2 mm Diameter | |||||||||
| 4 mm | -0.038 mm to 0.038 mm | MPP | MPP-2MM-4 | 0.5 mm | 25 | 95648A310 | 00000 | ||
| 5 mm | -0.038 mm to 0.038 mm | MPP | MPP-2MM-5 | 0.5 mm | 25 | 95648A320 | 00000 | ||
| 6 mm | -0.038 mm to 0.038 mm | MPP | MPP-2MM-6 | 0.5 mm | 25 | 95648A330 | 00000 | ||
| 8 mm | -0.038 mm to 0.038 mm | MPP | MPP-2MM-8 | 0.5 mm | 25 | 95648A340 | 00000 | ||
| 10 mm | -0.038 mm to 0.038 mm | MPP | MPP-2MM-10 | 0.5 mm | 25 | 95648A350 | 00000 | ||
Rivet Studs
 |  |
Add these studs to thin material when you only have access to one side. An alternative to weld and press-fit studs, they have a knurled body that resists loosening from vibration. Install them in a drilled hole with a lever-style rivet nut tool. Use with Grade 5 nuts.
Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.
Flange | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | For Material Thk. | Drill Bit Size | Body Dia. | Dia. | Thk. | Installed Body Lg. | Thread Lg. | Tensile Strength | Hardness | Pkg. Qty. | Pkg. | |||
Zinc-Plated Steel | ||||||||||||||
| 6-32 | 0.02" to 0.08" | 17/64" | 0.265" | 0.39" | 0.030" | 0.36" | 0.5" | Not Rated | Not Rated | 10 | 98075A111 | 000000 | ||
| 6-32 | 0.08" to 0.13" | 17/64" | 0.265" | 0.39" | 0.030" | 0.36" | 0.45" | Not Rated | Not Rated | 10 | 98075A115 | 00000 | ||
| 8-32 | 0.02" to 0.08" | 17/64" | 0.265" | 0.39" | 0.030" | 0.36" | 0.5" | Not Rated | Not Rated | 10 | 98075A119 | 00000 | ||
| 8-32 | 0.08" to 0.13" | 17/64" | 0.265" | 0.39" | 0.030" | 0.36" | 0.45" | Not Rated | Not Rated | 10 | 98075A123 | 00000 | ||
| 10-24 | 0.02" to 0.13" | 19/64" | 0.296" | 0.415" | 0.030" | 0.38" | 0.5" | Not Rated | Not Rated | 10 | 98075A127 | 00000 | ||
| 10-32 | 0.02" to 0.13" | 19/64" | 0.296" | 0.415" | 0.030" | 0.38" | 0.5" | Not Rated | Not Rated | 10 | 98075A135 | 00000 | ||
| 10-32 | 0.13" to 0.225" | 19/64" | 0.296" | 0.415" | 0.030" | 0.38" | 0.405" | Not Rated | Not Rated | 10 | 98075A139 | 00000 | ||
| 1/4"-20 | 0.027" to 0.165" | 25/64" | 0.39" | 0.5" | 0.030" | 0.465" | 0.625" | Not Rated | Not Rated | 10 | 98075A143 | 00000 | ||
| 1/4"-20 | 0.165" to 0.26" | 25/64" | 0.39" | 0.5" | 0.030" | 0.465" | 0.53" | Not Rated | Not Rated | 10 | 98075A147 | 00000 | ||
| 5/16"-18 | 0.027" to 0.15" | 17/32" | 0.53" | 0.685" | 0.035" | 0.6" | 0.625" | Not Rated | Not Rated | 10 | 98075A151 | 00000 | ||
| 5/16"-18 | 0.15" to 0.312" | 17/32" | 0.53" | 0.685" | 0.035" | 0.555" | 0.463" | Not Rated | Not Rated | 10 | 98075A155 | 00000 | ||
| 3/8"-16 | 0.027" to 0.15" | 17/32" | 0.53" | 0.685" | 0.035" | 0.6" | 0.75" | Not Rated | Not Rated | 5 | 98075A159 | 00000 | ||
| 3/8"-16 | 0.15" to 0.312" | 17/32" | 0.53" | 0.685" | 0.035" | 0.535" | 0.588" | Not Rated | Not Rated | 5 | 98075A163 | 00000 | ||
Low-Profile Captive Pins
 |  |
Often used in cell phones and laptops, these low-profile pins attach thin panels such as printed circuit boards to metal and plastic bases. Also known as PEM® TackPins.
T4 PEM® Series—T4 PEM® Series pins are used to attach sheets to stainless steel. They are made of 400 series stainless steel to resist wear and abrasion and may be mildly magnetic. Pins are passivated for added protection against corrosion and oxidation.
TA PEM® Series—TA PEM® Series pins work with most materials. They are made of aluminum and are nonmagnetic.
Head | For Hole Dia. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. Tolerance | Dia. | Ht. | (A) | (B) | For Panel Thk. (C) | For Min. Panel Thk. (D) | PEM® Series No. | PEM® Part No. | Pkg. Qty. | Pkg. | |||
400 Series Stainless Steel | ||||||||||||||
0.051" Diameter | ||||||||||||||
| 0.04" | -0.002" to 0.002" | 0.079" | 0.008" | 0.058" | 0.04" | 0.008" to 0.011" | 0.035" | T4 | T4-10-025 | 25 | 90366A111 | 00000 | ||
Aluminum | ||||||||||||||
0.051" Diameter | ||||||||||||||
| 0.04" | -0.002" to 0.002" | 0.079" | 0.008" | 0.058" | 0.04" | 0.008" to 0.011" | 0.035" | TA | TA-10-025 | 25 | 90366A112 | 0000 | ||
| 0.051" | -0.002" to 0.002" | 0.079" | 0.008" | 0.058" | 0.04" | 0.019" to 0.022" | 0.035" | TA | TA-10-050 | 25 | 90366A113 | 0000 | ||
| 0.06" | -0.002" to 0.002" | 0.079" | 0.008" | 0.058" | 0.04" | 0.028" to 0.031" | 0.035" | TA | TA-10-075 | 25 | 90366A114 | 0000 | ||
Captive Pins for Soft Materials
 |  |
The grooves in these pins grip plastics and other soft materials. Press them in to hold panels together. Also known as PEM® TackSert pins, their small size makes them suitable for use in electronic assemblies.
TK4 PEM® Series—TK4 PEM® Series pins are used to attach sheets to cast aluminum and other brittle materials. They are made of 400 series stainless steel to resist wear and abrasion and may be mildly magnetic. Pins are passivated for added protection against corrosion and oxidation.
TKA PEM® Series—TKA PEM® Series pins are used to attach sheets to plastics. They're made of aluminum and are nonmagnetic.
Head | For Hole Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | (A) | (B) | For Maximum Panel Thickness (C) | PEM® Series No. | PEM® Part No. | Pkg. Qty. | Pkg. | |||
400 Series Stainless Steel | ||||||||||||
0.047" Diameter | ||||||||||||
| 0.039" | 0.071" | 0.011" | 0.051" | 0.039" | 0.008" | TK4 | TK4-10-100 | 25 | 90367A111 | 00000 | ||
| 0.059" | 0.071" | 0.011" | 0.051" | 0.039" | 0.028" | TK4 | TK4-10-150 | 25 | 90367A112 | 0000 | ||
| 0.079" | 0.071" | 0.011" | 0.051" | 0.039" | 0.047" | TK4 | TK4-10-200 | 25 | 90367A113 | 0000 | ||
| 0.098" | 0.071" | 0.011" | 0.051" | 0.039" | 0.067" | TK4 | TK4-10-250 | 25 | 90367A114 | 0000 | ||
| 0.118" | 0.071" | 0.011" | 0.051" | 0.039" | 0.087" | TK4 | TK4-10-300 | 25 | 90367A115 | 0000 | ||
Aluminum | ||||||||||||
0.047" Diameter | ||||||||||||
| 0.039" | 0.071" | 0.011" | 0.051" | 0.039" | 0.008" | TKA | TKA-10-100 | 25 | 90367A116 | 0000 | ||
| 0.059" | 0.071" | 0.011" | 0.051" | 0.039" | 0.028" | TKA | TKA-10-150 | 25 | 90367A117 | 0000 | ||
| 0.079" | 0.071" | 0.011" | 0.051" | 0.039" | 0.047" | TKA | TKA-10-200 | 25 | 90367A118 | 0000 | ||
| 0.098" | 0.071" | 0.011" | 0.051" | 0.039" | 0.067" | TKA | TKA-10-250 | 25 | 90367A119 | 0000 | ||
| 0.118" | 0.071" | 0.011" | 0.051" | 0.039" | 0.087" | TKA | TKA-10-300 | 25 | 90367A120 | 0000 | ||
