Also known as inductive proximity switches, these detect metallic objects even if they’re obscured by water, oil, dirt, or a surface finish. Sensing distance is based on the target material. The distance listed is for mild steel. They’re often used with programmable logic controllers (PLCs) and produce PNP or NPN signal output. To determine the signal output of a switch you are replacing, use Testers for Proximity and Photoelectric Switches (not included).

Flush switches, also known as embeddable or shielded switches, can be mounted so that the sensor face is level with the surface of any material, including metal. They’re more accurate than projecting switches at close range and can be mounted close together without causing interference.

Switches with a plug connect to cables with a socket (sold separately), allowing you to quickly connect and disconnect the switch.

Switches with IO link can be configured remotely when connected to a PLC, a human-machine interface (HMI), or a computer.

IP67 and IP68 rated switches are protected from temporary submersion. IP69K rated switches are protected from high-pressure, high-temperature washdowns.

Also available: If you don’t see the switch you need, please select 6693T999 and specify manufacturer and manufacturer part number.