Sense objects from farther away than with other DC proximity switches that have the same diameter.

Eliminate the need to calculate the sensing distance when using different metals—these switches sense all metal at the same distance. Also known as K=1 sensors.

The flexible cable on these switches withstands applications that require frequent motion, such as robotics.

Turn the face on these switches to sense metallic objects from the front, sides, top, or bottom.

These inductive proximity switches sense metallic objects each time they pass through the slot, even when they’re obscured by water, oil, dirt, or a surface finish. Use them to measure the speed of rotating equipment and to count or detect moving objects, such as sheet metal being fed into a stamping process.

Sense objects as they pass through the switch’s ring via tubing or a funnel. These switches are often used to monitor blockages, detect breaks in spooling wire, or count small metallic parts, such as screws, during the stamping process.

Actuate your switch with precision—these proximity switches have an easy-to-read screen for precise distance inputs, measurements, and troubleshooting.

Detect the presence or absence of an object moving at high speeds with a light beam. These switches have a longer sensing distance than proximity and ultrasonic switches.

These switches have a receiver built into the housing, eliminating the need to align components and measure sensing distance during installation.

Detect objects as thin as a freshly sharpened pencil tip. These switches are best for tight spaces because they have a smaller light beam and can detect smaller objects than standard photoelectric switches.

About half the size of standard photoelectric switches, these switches are good for use in tight spaces. They detect objects moving at high speeds with a light beam.

Immediately cut power to machinery by breaking the light beam between two barriers.

Shut off machinery on your roughest, dirtiest job sites the second someone or something gets too close.

Maintain sanitary standards—these switches have smooth surfaces without crevices, so they prevent bacteria from building up and are easy to clean.

Often used with programmable logic controllers (PLCs), these switches use DC input voltage and produce PNP or NPN signal output.

Rated NEMA 4X, 6P, IP68 and IP69K, these switches resist corrosion and high-pressure, high-temperature washdowns, and can withstand temporary submersion.

These switches sense when a valve is open or closed, supporting flow and temperature control within your system and offering reliable feedback.

With a single device, continuously monitor the distance of moving items and turn equipment on and off based on their position.

With just a light touch, these switches turn circuits on and off in sanitary areas—even when you're wearing gloves.

Measure the level of conductive liquids without drilling a hole in your tank—these switches mount to the outside of the tank and track the capacitance between them and the tank’s contents.