Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Get two stages of filtration—the first stage removes most particles and water droplets; the second captures any remaining particles and water droplets down to 5 microns.

The housing and bowl are 316 stainless steel to handle extremely corrosive environments such as those in semiconductor, marine, chemical, and paper industries.

Assembled, inspected, and packaged in a clean environment, these filters come sealed in anti-static double bags.

Mount these filters to a 35 mm DIN rail with the included brackets.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

A polyurethane bowl offers good chemical resistance for use with synthetic compressor oils and aggressive cleaning agents.

Use these filters to extend the service life of air-powered tools and equipment and then throw them away when you're done.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

Eliminate small traces of oil vapor and its associated odor with these filters and then throw them away when you're done.

No need to buy and service two filters—these filters have a single element that removes both large and fine particles.

Remove bacteria, viruses, moisture, and other particles from compressed air and gases used in food, pharmaceutical, biotech, and electronics applications.

Generate clean air for instrumentation and applications with critical air requirements.

In addition to removing large amounts of water, these separators also remove particles and oil droplets. Place them after your compressor and aftercooler, or at the point of use in applications that don't require an aftercooler.

These separators have higher flow rates compared to our other compressed air separators. Prevent equipment damage and wear caused by moisture in your compressed air supply. The first step in water removal, use one of these separators to remove the large amount of water created as compressed air cools.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.

Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.

No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.

These dryer/filters have a clay desiccant that removes moisture, oil, and particles, so there’s no need to install a separate filter and dryer. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.

With a clear polycarbonate bowl that’s visible from all angles and silica gel desiccant that changes from blue to pink, it’s easy to see when it’s time to change the cartridge on these dryer/filters and dryer/filter/regulators.

These all-in-one dryer/filters eliminate the need for individual dryers, separators, and filters. They cool air through refrigeration to condense water vapor for removal.

Commonly used with reservoirs and tanks, these strainers filter particles before they enter your system.

Also known as foot valves, these strainers stop particles from entering your line while preventing backward flow. They are commonly used with reservoirs and tanks.

The tallest of our suction strainers, these have a large surface area to retain more debris. They are also known as sump strainers.

Install these high-capacity T-strainers prior to valves, pumps, and nozzles to protect sensitive equipment.

Add these inline T-strainers to your sanitary process line to trap solid particles during clean-in-place (CIP) cycles. They have quick-clamp sanitary tube connections, also known as tri-clamp connections, for use in dairy, food, and other process lines that require frequent cleaning and disassembly. As the high-pressure cleaning fluid flows through your line, the strainer's screen catches particles larger than 1/8" to prevent damage to pumps, valves, and other downstream components.

A nylon housing provides excellent durability and impact resistance.

A wide two-piece body holds more debris than other plastic Y-strainers. The body comes apart for easy cleaning without disconnecting your line.

Small in size, these strainers fit into tight spaces. They are made of lightweight Noryl PPO, which provides excellent corrosion resistance.

For use in medium-pressure applications, these Y-strainers have good corrosion resistance.

Made of 316 stainless steel, these basket strainers have better corrosion resistance than iron and bronze basket strainers.

Iron basket strainers offer fair corrosion resistance.

Bronze basket strainers are stronger and more corrosion resistant than iron basket strainers.

Iron basket strainers offer fair corrosion resistance.

PVC strainers withstand temperatures up to 140° F.

No need to shut down your operation to service your strainer—these have two baskets so you can divert flow to one basket while you work on the other.

Install these strainer washers in pipe or fittings to protect equipment in locations where other strainers don’t fit.

Use with sieves for accurate results in material separation and testing—shakers vibrate stacked sieves to distribute particles evenly, which ensures separation.

Place on your sieve to keep materials in while keeping contaminants out.

Replace individual rods in an existing filter or create a custom filter.

Pull the rods from their sleeve to release particles stuck to the filter.

Easy to keep clean thanks to their design, these filters pull metal and magnetic particles out of food and sanitary material as it passes through gravity hoppers, chutes, and other parts of your process line.

Float these pillows on the surface of your liquid to soak up oil.

Reach water and coolants located under conveyors and in enclosed sumps—these skimmers have a loop of flexible polyurethane belting that drifts into hard-to-access areas.

Accommodate shallow and oddly-shaped tanks—this skimmer has a belt that you can position at an angle.

When close to steam temperature, these traps—also called thermodynamic steam traps—release condensate from steam lines to save energy in food, pharmaceutical, and other sanitary environments.

Suitable for food, pharmaceutical, and other sanitary environments, these steam traps are made of 316 stainless steel with a Viton® fluoroelastomer O-ring to stand up to frequent washdowns with harsh cleaners and sanitizers.

Also known as inverted-bucket steam traps, these provide near-continuous discharge to accommodate high condensate levels.

These steam traps offer good corrosion resistance.

These pullers have a cage around the jaws that keeps them aligned so you can secure bearings and pulleys quickly.

Move the immovable—this puller set includes a hydraulic hand pump so you can create up to 17 1/2 tons of pulling force.

Remove press-fit hubs and fan blades in a variety of sizes. Sets include a hub adapter and long jaws so you can grip large components.

Separate bearings, collars, hubs, and other shaft-mounted items so you can remove them.

Clamp these separators into the V-groove of a pulley for a secure grip.

Install and remove bearings, pulleys, sprockets, and other press-fit parts with tapered holes.

Get a grip on objects with blind holes—these pullers have an expanding collet that secures bearings and bushings from inside.

Grip objects on the outside or inside to tackle both types of pulling jobs.

Tackle a wide variety of pulling jobs—use pullers in these sets to grip objects from the outside or the inside.

Self-locking jaws hold these pullers in place for quick one-hand operation. Spring tension holds the jaws against the object being pulled, so you can tighten the locking nut.

Made of ABS plastic, these wedges resist splitting and shattering, even in subzero temperatures.

Like the claw end of a hammer around a nail, these wedges grip studs or rods from both sides to give you leverage for prying apart two joined components.

These tools are often used for lifting and aligning machinery or to separate pipe flanges. They’re also known as banana wedges.

Make quick height adjustments. Also known as fox and flange wedges.

The short, tapered tip is ideal for splitting, separating, and holding wood.