Removable Drill Bushings
Replace worn bushings and quickly change IDs without needing to repeatedly use a lever press. Instead of pressing bushings in and out of your jig fixture, which can cause damage, these bushings slide in and out of sleeves (sold separately). By swapping in a bushing with a different ID, you can change the size of your bit and still use the same hole in your fixture. All are made to tight dimensional tolerances for consistent, accurate results, even as you change them in and out. They're also known as slip-fixed and renewable bushings.
Choose a sleeve with a length that matches the length of your bushing. To prevent bushings from spinning inside the sleeve as you drill, pair a standard sleeve with a lock screw, or use a locking sleeve.
Lock screws thread into a hole in your jig. The head of the screw fits into a notch on the bushing's head, which keeps the bushing from spinning.
Locking sleeves act as a sleeve and lock screw at the same time. They have a raised flange that fits into the notch on the bushing's head, keeping the bushing in place.
For additional sizes, see Made-to-Order Removable Drill Bushings.
For technical drawings and 3-D models, click on a part number.
Head | Tolerance | Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
OD | Lg. | For Drill Bit Size | OD | Thick. | Lock Screw/Bushing Ctr.-to-Ctr. | ID | OD | Lg. | Drill Bushing Type | Material | 1-5 | 6-11 | 12-Up | |
0.0135" ID | ||||||||||||||
3/16" | 1/4" | No. 80 | 5/16" | 3/16" | 17/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 000000 | 000000 | 000000 |
3/16" | 3/8" | No. 80 | 5/16" | 3/16" | 17/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/16" | 1/2" | No. 80 | 5/16" | 3/16" | 17/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/16" | 3/4" | No. 80 | 5/16" | 3/16" | 17/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.0625" ID | ||||||||||||||
5/16" | 3/4" | 1/16" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.0785" ID | ||||||||||||||
3/16" | 1/2" | No. 47 | 5/16" | 3/16" | 17/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.0938" ID | ||||||||||||||
5/16" | 3/8" | 3/32" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 1/2" | 3/32" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 3/4" | 3/32" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 1" | 3/32" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.098" ID | ||||||||||||||
5/16" | 1" | No. 40 | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.1094" ID | ||||||||||||||
1/4" | 1/4" | 7/64" | 7/16" | 1/4" | 23/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 1/2" | 7/64" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.125" ID | ||||||||||||||
1/4" | 1/4" | 1/8" | 7/16" | 1/4" | 23/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/4" | 3/8" | 1/8" | 7/16" | 1/4" | 23/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/4" | 1/2" | 1/8" | 7/16" | 1/4" | 23/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/4" | 3/4" | 1/8" | 7/16" | 1/4" | 23/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 3/8" | 1/8" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 1/2" | 1/8" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 3/4" | 1/8" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 1" | 1/8" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 1 3/8" | 1/8" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.1285" ID | ||||||||||||||
1/4" | 1/4" | No. 30 | 7/16" | 1/4" | 23/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/4" | 5/16" | No. 30 | 7/16" | 1/4" | 23/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/4" | 1/2" | No. 30 | 7/16" | 1/4" | 23/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 1/2" | No. 30 | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.136" ID | ||||||||||||||
1/4" | 1/4" | No. 29 | 7/16" | 1/4" | 23/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/4" | 3/8" | No. 29 | 7/16" | 1/4" | 23/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/4" | 1/2" | No. 29 | 7/16" | 1/4" | 23/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/4" | 1" | No. 29 | 7/16" | 1/4" | 23/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 1/2" | No. 29 | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.1406" ID | ||||||||||||||
5/16" | 1/2" | 9/64" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.144" ID | ||||||||||||||
5/16" | 1/2" | No. 27 | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.147" ID | ||||||||||||||
5/16" | 3/4" | No. 26 | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.1495" ID | ||||||||||||||
5/16" | 1/2" | No. 25 | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.154" ID | ||||||||||||||
5/16" | 1/2" | No. 23 | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.1563" ID | ||||||||||||||
5/16" | 3/8" | 5/32" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 1/2" | 5/32" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 3/4" | 5/32" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 1" | 5/32" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1/2" | 5/32" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.157" ID | ||||||||||||||
5/16" | 1" | No. 22 | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.159" ID | ||||||||||||||
5/16" | 3/8" | No. 21 | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 1/2" | No. 21 | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 0000000 | 00000 | 00000 | 00000 |
0.1719" ID | ||||||||||||||
5/16" | 3/8" | 11/64" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 1/2" | 11/64" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.173" ID | ||||||||||||||
5/16" | 1/2" | No. 17 | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.185" ID | ||||||||||||||
5/16" | 1" | No. 13 | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1/2" | No. 13 | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.1875" ID | ||||||||||||||
5/16" | 1/4" | 3/16" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 3/8" | 3/16" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 1/2" | 3/16" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/16" | 3/4" | 3/16" | 35/64" | 1/4" | 1/2" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 5/16" | 3/16" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 3/8" | 3/16" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1/2" | 3/16" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 3/4" | 3/16" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1" | 3/16" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1 3/8" | 3/16" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.191" ID | ||||||||||||||
1/2" | 1/2" | No. 11 | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.1935" ID | ||||||||||||||
1/2" | 1/2" | No. 10 | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1" | No. 10 | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.196" ID | ||||||||||||||
1/2" | 1/2" | No. 9 | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.199" ID | ||||||||||||||
3/8" | 3/4" | No. 8 | 5/8" | 1/4" | 29/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.201" ID | ||||||||||||||
3/8" | 1/4" | No. 7 | 5/8" | 1/4" | 29/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 0000 |
3/8" | 5/8" | No. 7 | 5/8" | 1/4" | 29/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/8" | 3/4" | No. 7 | 5/8" | 1/4" | 29/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 3/4" | No. 7 | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.2031" ID | ||||||||||||||
1/2" | 1/2" | 13/64" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 3/4" | 13/64" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1" | 13/64" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.213" ID | ||||||||||||||
1/2" | 1/2" | No. 3 | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1" | No. 3 | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.2188" ID | ||||||||||||||
3/8" | 1/4" | 7/32" | 5/8" | 1/4" | 29/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 0000 |
3/8" | 1/2" | 7/32" | 5/8" | 1/4" | 29/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/8" | 3/4" | 7/32" | 5/8" | 1/4" | 29/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/8" | 1" | 7/32" | 5/8" | 1/4" | 29/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1/2" | 7/32" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 3/4" | 7/32" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1" | 7/32" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.221" ID | ||||||||||||||
1/2" | 1/2" | No. 2 | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.228" ID | ||||||||||||||
1/2" | 1/2" | No. 1 | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 3/4" | No. 1 | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1" | No. 1 | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.2344" ID | ||||||||||||||
1/2" | 1/2" | 15/64" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 3/4" | 15/64" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.238" ID | ||||||||||||||
1/2" | 1/2" | B | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.25" ID | ||||||||||||||
7/16" | 1/2" | 1/4", E | 5/8" | 1/4" | 29/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
7/16" | 5/8" | 1/4", E | 5/8" | 1/4" | 29/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
7/16" | 3/4" | 1/4", E | 5/8" | 1/4" | 29/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
7/16" | 1" | 1/4", E | 5/8" | 1/4" | 29/64" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1/4" | 1/4", E | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 5/16" | 1/4", E | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 0000 | 0000 |
1/2" | 3/8" | 1/4", E | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1/2" | 1/4", E | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 3/4" | 1/4", E | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1" | 1/4", E | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1 3/8" | 1/4", E | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1/2" | 1/4", E | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0004" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.257" ID | ||||||||||||||
1/2" | 1/2" | F | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 3/4" | F | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.2656" ID | ||||||||||||||
1/2" | 1/2" | 17/64" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 3/4" | 17/64" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1" | 17/64" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.2813" ID | ||||||||||||||
1/2" | 1/2" | 9/32" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 3/4" | 9/32" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1" | 9/32" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.2969" ID | ||||||||||||||
1/2" | 1/2" | 19/64" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.302" ID | ||||||||||||||
1/2" | 1/2" | N | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.3125" ID | ||||||||||||||
1/2" | 1/4" | 5/16" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 3/8" | 5/16" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1/2" | 5/16" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 3/4" | 5/16" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1" | 5/16" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1 3/8" | 5/16" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1 1/2" | 5/16" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
9/16" | 1/2" | 5/16" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
9/16" | 5/8" | 5/16" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
9/16" | 3/4" | 5/16" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
9/16" | 1" | 5/16" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1/2" | 5/16" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 3/4" | 5/16" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1" | 5/16" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.316" ID | ||||||||||||||
1/2" | 1/2" | O | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.3281" ID | ||||||||||||||
1/2" | 3/8" | 21/64" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1/2" | 21/64" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1" | 21/64" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 2 1/8" | 21/64" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.332" ID | ||||||||||||||
1/2" | 3/8" | Q | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1/2" | Q | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.3438" ID | ||||||||||||||
1/2" | 1/2" | 11/32" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 3/4" | 11/32" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1/2" | 1" | 11/32" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1 3/8" | 11/32" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.3594" ID | ||||||||||||||
3/4" | 1 3/8" | 23/64" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.375" ID | ||||||||||||||
1/2" | 1/2" | 3/8" | 51/64" | 1/4" | 5/8" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/8" | 3/8" | 3/8" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/8" | 1/2" | 3/8" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/8" | 5/8" | 3/8" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/8" | 3/4" | 3/8" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/8" | 1" | 3/8" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1/2" | 3/8" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 3/4" | 3/8" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1" | 3/8" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.379" ID | ||||||||||||||
1 3/8" | 1/2" | __ | 1 51/64" | 3/8" | 1 7/64" | 0.0001" to 0.0005" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.3906" ID | ||||||||||||||
5/8" | 1/2" | 25/64" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/8" | 3/4" | 25/64" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/8" | 1" | 25/64" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1/2" | 25/64" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 3/4" | 25/64" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1" | 25/64" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.4063" ID | ||||||||||||||
5/8" | 3/8" | 13/32" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/8" | 1/2" | 13/32" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/8" | 3/4" | 13/32" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/8" | 1" | 13/32" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1/2" | 13/32" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 3/4" | 13/32" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.4219" ID | ||||||||||||||
3/4" | 1/2" | 27/64" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 3/4" | 27/64" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1" | 27/64" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.4375" ID | ||||||||||||||
5/8" | 1/2" | 7/16" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/8" | 5/8" | 7/16" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/8" | 3/4" | 7/16" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
5/8" | 1" | 7/16" | 7/8" | 1/4" | 37/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 3/8" | 7/16" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1/2" | 7/16" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 3/4" | 7/16" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1" | 7/16" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1 3/8" | 7/16" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.4531" ID | ||||||||||||||
3/4" | 1" | 29/64" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.4688" ID | ||||||||||||||
3/4" | 1/2" | 15/32" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 3/4" | 15/32" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1" | 15/32" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1 3/4" | 15/32" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.5" ID | ||||||||||||||
3/4" | 3/8" | 1/2" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1/2" | 1/2" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 0000 |
3/4" | 5/8" | 1/2" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 3/4" | 1/2" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1" | 1/2" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1 3/8" | 1/2" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1 1/2" | 1/2" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1 3/4" | 1/2" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 1/2" | 1/2" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 3/4" | 1/2" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 1" | 1/2" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 1 3/8" | 1/2" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 1 1/2" | 1/2" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.5156" ID | ||||||||||||||
3/4" | 1" | 33/64" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.5313" ID | ||||||||||||||
3/4" | 1/2" | 17/32" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 3/4" | 17/32" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 3/4" | 17/32" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.5625" ID | ||||||||||||||
3/4" | 3/4" | 9/16" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
3/4" | 1" | 9/16" | 1 3/64" | 1/4" | 3/4" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 3/4" | 9/16" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.6094" ID | ||||||||||||||
1" | 1" | 39/64" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.625" ID | ||||||||||||||
7/8" | 1/2" | 5/8" | 1 1/4" | 3/8" | 53/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
7/8" | 3/4" | 5/8" | 1 1/4" | 3/8" | 53/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
7/8" | 1" | 5/8" | 1 1/4" | 3/8" | 53/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 1/2" | 5/8" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 3/4" | 5/8" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 1" | 5/8" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 1 3/8" | 5/8" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 1 1/2" | 5/8" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.6563" ID | ||||||||||||||
1" | 3/4" | 21/32" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 1" | 21/32" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.6875" ID | ||||||||||||||
1" | 1/2" | 11/16" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 3/4" | 11/16" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 1" | 11/16" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.75" ID | ||||||||||||||
1" | 1/2" | 3/4" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 3/4" | 3/4" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 1" | 3/4" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 1 1/4" | 3/4" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 1 3/8" | 3/4" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" | 1 1/2" | 3/4" | 1 27/64" | 3/8" | 59/64" | 0.0001" to 0.0005" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/8" | 3/4" | 3/4" | 1 51/64" | 3/8" | 1 7/64" | 0.0001" to 0.0005" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/8" | 1" | 3/4" | 1 51/64" | 3/8" | 1 7/64" | 0.0001" to 0.0005" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/8" | 1 3/8" | 3/4" | 1 51/64" | 3/8" | 1 7/64" | 0.0001" to 0.0005" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/8" | 1 1/2" | 3/4" | 1 51/64" | 3/8" | 1 7/64" | 0.0001" to 0.0005" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.7813" ID | ||||||||||||||
1" | 3/4" | 25/32" | 1 27/64" | 3/8" | 59/64" | 0.0002" to 0.0006" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.8125" ID | ||||||||||||||
1" | 3/4" | 13/16" | 1 27/64" | 3/8" | 59/64" | 0.0002" to 0.0006" | -0.0002" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/8" | 1" | 13/16" | 1 51/64" | 3/8" | 1 7/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.875" ID | ||||||||||||||
1 3/8" | 3/4" | 7/8" | 1 51/64" | 3/8" | 1 7/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/8" | 1" | 7/8" | 1 51/64" | 3/8" | 1 7/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
0.9375" ID | ||||||||||||||
1 3/8" | 1" | 15/16" | 1 51/64" | 3/8" | 1 7/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1" ID | ||||||||||||||
1 3/8" | 1/2" | 1" | 1 51/64" | 3/8" | 1 7/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/8" | 3/4" | 1" | 1 51/64" | 3/8" | 1 7/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/8" | 1" | 1" | 1 51/64" | 3/8" | 1 7/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/8" | 1 3/8" | 1" | 1 51/64" | 3/8" | 1 7/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/8" | 1 1/2" | 1" | 1 51/64" | 3/8" | 1 7/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 3/4" | 1" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1" | 1" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1 1/2" | 1" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1.0469" ID | ||||||||||||||
1 3/4" | 3/4" | 1 3/64" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1" | 1 3/64" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1.0625" ID | ||||||||||||||
1 3/4" | 3/4" | 1 1/16" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1" | 1 1/16" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1 3/8" | 1 1/16" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1.125" ID | ||||||||||||||
1 3/4" | 3/4" | 1 1/8" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1" | 1 1/8" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1 3/8" | 1 1/8" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1 1/2" | 1 1/8" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1 3/4" | 1 1/8" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1.25" ID | ||||||||||||||
1 3/4" | 3/4" | 1 1/4" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1" | 1 1/4" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1 3/8" | 1 1/4" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1 1/2" | 1 1/4" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1 3/4" | 1 1/4" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 2 1/8" | 1 1/4" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 2 1/2" | 1 1/4" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1.3125" ID | ||||||||||||||
1 3/4" | 3/4" | 1 5/16" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1" | 1 5/16" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1 1/2" | 1 5/16" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1.375" ID | ||||||||||||||
1 3/4" | 3/4" | 1 3/8" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1" | 1 3/8" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1 3/8" | 1 3/8" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1 1/2" | 1 3/8" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1 3/4" | 1 3/4" | 1 3/8" | 2 19/64" | 3/8" | 1 25/64" | 0.0002" to 0.0006" | -0.0003" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
1.875" ID | ||||||||||||||
2 1/4" | 3/4" | 1 7/8" | 2 51/64" | 3/8" | 1 41/64" | 0.0003" to 0.0007" | -0.0004" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
2 1/4" | 1" | 1 7/8" | 2 51/64" | 3/8" | 1 41/64" | 0.0003" to 0.0007" | -0.0004" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
2 1/4" | 1 1/2" | 1 7/8" | 2 51/64" | 3/8" | 1 41/64" | 0.0003" to 0.0007" | -0.0004" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
2 1/4" | 1 3/4" | 1 7/8" | 2 51/64" | 3/8" | 1 41/64" | 0.0003" to 0.0007" | -0.0004" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
2 1/4" | 2 1/2" | 1 7/8" | 2 51/64" | 3/8" | 1 41/64" | 0.0003" to 0.0007" | -0.0004" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
2 1/4" | 3" | 1 7/8" | 2 51/64" | 3/8" | 1 41/64" | 0.0003" to 0.0007" | -0.0004" to 0" | -0.015" to 0.015" | SF | Steel | 00000000 | 00000 | 00000 | 00000 |
Shoulder | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Bushing OD | Thread Size | Head OD | O'all Lg. | Head-to-Shoulder Lg. | Lg. | Wd. | Hex Size | For Drill Bushing Type | Material | Pkg. Qty. | Pkg. | |
Slotted | ||||||||||||
3/16" | 8-32 | 5/16" | 7/16" | 3/16" | 0.1" | 3/16" | __ | SF | Steel | 10 | 0000000 | 000000 |
1/4", 3/8", 7/16", 9/16", 5/8" | 10-32 | 3/8" | 1/2" | 1/4" | 0.138" | 1/4" | __ | SF | Steel | 10 | 0000000 | 00000 |
5/16", 1/2", 3/4" | 5/16"-18 | 5/8" | 5/8" | 1/4" | 0.138" | 3/8" | __ | SF | Steel | 10 | 0000000 | 00000 |
7/8", 1 1/8", 1 1/4", 1 1/2" | 5/16"-18 | 5/8" | 3/4" | 3/8" | 0.2" | 3/8" | __ | SF | Steel | 10 | 0000000 | 00000 |
1", 1 3/8" | 5/16"-18 | 5/8" | 7/8" | 3/8" | 0.2" | 3/8" | __ | SF | Steel | 10 | 0000000 | 00000 |
1 3/4", 2 1/4" | 3/8"-16 | 3/4" | 1" | 3/8" | 0.2" | 7/16" | __ | SF | Steel | 10 | 0000000 | 00000 |
Hex | ||||||||||||
3/16" | 8-32 | 5/16" | 7/16" | 3/16" | 0.1" | 3/16" | 3/32" | SF | Steel | 10 | 0000000 | 00000 |
1/4", 3/8", 7/16", 9/16", 5/8" | 10-32 | 3/8" | 1/2" | 1/4" | 0.138" | 1/4" | 1/8" | SF | Steel | 10 | 0000000 | 00000 |
5/16", 1/2", 3/4" | 5/16"-18 | 5/8" | 5/8" | 1/4" | 0.138" | 3/8" | 3/16" | SF | Steel | 10 | 0000000 | 00000 |
7/8", 1 1/8", 1 1/4", 1 1/2" | 5/16"-18 | 5/8" | 3/4" | 3/8" | 0.2" | 3/8" | 3/16" | SF | Steel | 10 | 0000000 | 00000 |
1", 1 3/8" | 5/16"-18 | 5/8" | 7/8" | 3/8" | 0.2" | 3/8" | 3/16" | SF | Steel | 10 | 0000000 | 00000 |
1 3/4", 2 1/4" | 3/8"-16 | 3/4" | 1" | 3/8" | 0.2" | 7/16" | 7/32" | SF | Steel | 10 | 0000000 | 00000 |
For Bushing OD | ID | OD | Lg. | ID Tolerance | For Drill Bushing Type | Material | Hardness | Sleeve ANSI Number | Each | |
3/16" | 3/16" | 5/16" | 3/8" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | L-20-6 | 00000000 | 00000 |
3/16" | 3/16" | 5/16" | 1/2" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | L-20-8 | 00000000 | 0000 |
1/4" | 1/4" | 7/16" | 1/4" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | L-28-4 | 00000000 | 0000 |
1/4" | 1/4" | 7/16" | 3/8" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | L-28-6 | 00000000 | 0000 |
1/4" | 1/4" | 7/16" | 1/2" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | L-28-8 | 00000000 | 0000 |
1/4" | 1/4" | 7/16" | 3/4" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | L-28-12 | 00000000 | 0000 |
5/16" | 5/16" | 1/2" | 3/8" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | L-32-6 | 00000000 | 0000 |
5/16" | 5/16" | 1/2" | 1/2" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | L-32-8 | 00000000 | 0000 |
5/16" | 5/16" | 1/2" | 3/4" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | L-32-12 | 00000000 | 0000 |
5/16" | 5/16" | 1/2" | 1" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | L-32-16 | 00000000 | 00000 |
5/16" | 5/16" | 9/16" | 3/8" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | L-36-6 | 00000000 | 0000 |
5/16" | 5/16" | 9/16" | 3/4" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | L-36-12 | 00000000 | 0000 |
3/8" | 3/8" | 5/8" | 1/2" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | L-40-8 | 00000000 | 0000 |
3/8" | 3/8" | 5/8" | 5/8" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | L-40-10 | 00000000 | 0000 |
3/8" | 3/8" | 5/8" | 3/4" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | L-40-12 | 00000000 | 0000 |
7/16" | 7/16" | 5/8" | 1/2" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-40-8 | 00000000 | 0000 |
7/16" | 7/16" | 5/8" | 5/8" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-40-10 | 00000000 | 0000 |
7/16" | 7/16" | 5/8" | 3/4" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-40-12 | 00000000 | 0000 |
1/2" | 1/2" | 3/4" | 5/16" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-48-5 | 00000000 | 0000 |
1/2" | 1/2" | 3/4" | 3/8" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-48-6 | 00000000 | 0000 |
1/2" | 1/2" | 3/4" | 1/2" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-48-8 | 00000000 | 0000 |
1/2" | 1/2" | 3/4" | 3/4" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-48-12 | 00000000 | 0000 |
1/2" | 1/2" | 3/4" | 1" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-48-16 | 00000000 | 0000 |
1/2" | 1/2" | 3/4" | 1 3/8" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-48-22 | 00000000 | 00000 |
5/8" | 5/8" | 7/8" | 1/2" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-56-8 | 00000000 | 0000 |
5/8" | 5/8" | 7/8" | 5/8" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-56-10 | 00000000 | 00000 |
5/8" | 5/8" | 7/8" | 3/4" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-56-12 | 00000000 | 00000 |
5/8" | 5/8" | 7/8" | 1" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | L-56-16 | 00000000 | 00000 |
3/4" | 3/4" | 1" | 3/8" | 0.0003" to 0.0006" | SF | Steel | Rockwell C61 | L-64-6 | 00000000 | 00000 |
3/4" | 3/4" | 1" | 1/2" | 0.0003" to 0.0006" | SF | Steel | Rockwell C61 | L-64-8 | 00000000 | 00000 |
3/4" | 3/4" | 1" | 3/4" | 0.0003" to 0.0006" | SF | Steel | Rockwell C61 | L-64-12 | 00000000 | 00000 |
3/4" | 3/4" | 1" | 1" | 0.0003" to 0.0006" | SF | Steel | Rockwell C61 | L-64-16 | 00000000 | 00000 |
3/4" | 3/4" | 1" | 1 3/8" | 0.0003" to 0.0006" | SF | Steel | Rockwell C61 | L-64-22 | 00000000 | 00000 |
3/4" | 3/4" | 1" | 1 3/4" | 0.0003" to 0.0006" | SF | Steel | Rockwell C61 | L-64-28 | 00000000 | 00000 |
7/8" | 7/8" | 1 1/4" | 3/4" | 0.0004" to 0.0007" | SF | Steel | Rockwell C61 | L-80-12 | 00000000 | 00000 |
1" | 1" | 1 3/8" | 1/2" | 0.0004" to 0.0007" | SF | Steel | Rockwell C61 | L-88-8 | 00000000 | 00000 |
1" | 1" | 1 3/8" | 3/4" | 0.0004" to 0.0007" | SF | Steel | Rockwell C61 | L-88-12 | 00000000 | 00000 |
1" | 1" | 1 3/8" | 1" | 0.0004" to 0.0007" | SF | Steel | Rockwell C61 | L-88-16 | 00000000 | 00000 |
1" | 1" | 1 3/8" | 1 3/8" | 0.0004" to 0.0007" | SF | Steel | Rockwell C61 | L-88-22 | 00000000 | 00000 |
1" | 1" | 1 3/8" | 1 1/2" | 0.0004" to 0.0007" | SF | Steel | Rockwell C61 | L-88-24 | 00000000 | 00000 |
1 3/8" | 1 3/8" | 1 3/4" | 3/4" | 0.0006" to 0.001" | SF | Steel | Rockwell C61 | L-112-12 | 00000000 | 00000 |
1 3/8" | 1 3/8" | 1 3/4" | 1" | 0.0006" to 0.001" | SF | Steel | Rockwell C61 | L-112-16 | 00000000 | 00000 |
1 3/8" | 1 3/8" | 1 3/4" | 1 3/8" | 0.0006" to 0.001" | SF | Steel | Rockwell C61 | L-112-22 | 00000000 | 00000 |
For Bushing OD | ID | OD | Lg. | Head Dia. | Flange Distance | ID Tolerance | For Drill Bushing Type | Material | Hardness | Each | |
3/16" | 3/16" | 5/16" | 11/16" | 23/64" | 1/4" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | 00000000 | 000000 |
5/16" | 5/16" | 1/2" | 23/32" | 9/16" | 3/8" | 0.0001" to 0.0004" | SF | Steel | Rockwell C61 | 00000000 | 00000 |
1/2" | 1/2" | 3/4" | 47/64" | 13/16" | 1/2" | 0.0002" to 0.0005" | SF | Steel | Rockwell C61 | 00000000 | 00000 |
Made-to-Order Removable Drill Bushings
Reusable and easy to change out, these bushings are held in place by the included slotted head lock screw. They can also be used as spacers, shims, and machinery bushings. Also known as slip-fixed or renewable bushings.
To Order: Specify ID, OD, and length from the ranges listed. Refer to the chart above for minimum difference required between ID and OD.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Choose an ID | Choose an OD | Choose a Length | Length Tolerance | Drill Bushing Type | Material | Hardness | 1-5 | 6-11 | 12-Up | |
0.0135" to 2.2656" in 0.0001" increments | 0.1562" to 2.7500" in 0.0001" increments | 0.125" to 3" in 0.0625" increments | -0.015" to 0.015" | SF | Steel | Rockwell C61 | 00000000 | 000000 | 000000 | 000000 |
Drill Bushings for Plastic
The serrations grip to prevent rotation and spin out. Press or encase into plastic tooling for precise drilling.
Also Available: Other sizes. Please select 3378A999 and specify ID, OD, and length.
For technical drawings and 3-D models, click on a part number.
Tolerance | |||||||||
---|---|---|---|---|---|---|---|---|---|
OD | Lg. | For Drill Bit Size | ID | OD | Drill Bushing Type | Material | Hardness | Each | |
0.125" ID | |||||||||
5/16" | 5/16" | 1/8" | 0.0001" to 0.0004" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 000000 |
5/16" | 1/2" | 1/8" | 0.0001" to 0.0004" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.1563" ID | |||||||||
5/16" | 1/2" | 5/32" | 0.0001" to 0.0004" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.1875" ID | |||||||||
5/16" | 5/16" | 3/16" | 0.0001" to 0.0004" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
1/2" | 1/2" | 3/16" | 0.0001" to 0.0004" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.194" ID | |||||||||
5/16" | 1/2" | No. 10 | 0.0001" to 0.0004" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.2188" ID | |||||||||
1/2" | 1/2" | 7/32" | 0.0001" to 0.0004" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.25" ID | |||||||||
13/32" | 3/8" | 1/4" | 0.0001" to 0.0004" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
13/32" | 3/4" | 1/4", E | 0.0001" to 0.0004" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
1/2" | 5/16" | 1/4", E | 0.0001" to 0.0004" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
1/2" | 1/2" | 1/4", E | 0.0001" to 0.0004" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
1/2" | 3/4" | 1/4", E | 0.0001" to 0.0004" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.2656" ID | |||||||||
1/2" | 1/2" | 17/64" | 0.0001" to 0.0005" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.2813" ID | |||||||||
1/2" | 1/2" | 9/32" | 0.0001" to 0.0005" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.2969" ID | |||||||||
1/2" | 1/2" | 19/64" | 0.0001" to 0.0005" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.3125" ID | |||||||||
1/2" | 5/16" | 5/16" | 0.0001" to 0.0005" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
1/2" | 1/2" | 5/16" | 0.0001" to 0.0005" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
1/2" | 3/4" | 5/16" | 0.0001" to 0.0005" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
5/8" | 3/4" | 5/16" | 0.0001" to 0.0005" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.375" ID | |||||||||
5/8" | 1/2" | 3/8" | 0.0001" to 0.0005" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
5/8" | 3/4" | 3/8" | 0.0001" to 0.0005" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
3/4" | 1/2" | 3/8" | 0.0001" to 0.0005" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.4063" ID | |||||||||
5/8" | 3/4" | 13/32" | 0.0001" to 0.0005" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.4375" ID | |||||||||
5/8" | 3/4" | 7/16" | 0.0001" to 0.0005" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.5" ID | |||||||||
3/4" | 1/2" | 1/2" | 0.0001" to 0.0005" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
3/4" | 3/4" | 1/2" | 0.0001" to 0.0005" | 0.01" to 0.015" | SG | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
Removable Drill Bushings for Thin Metal
Unlike most bushings, these won’t buckle the material or distort the hole when installed in thin-gauge aluminum and steel plates. Insert them into a drilled hole and twist the lock ring to secure. Reusable and easy to replace, they are held in place by a lock ring (sold separately).
For technical drawings and 3-D models, click on a part number.
Tolerance | Thread | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ID | OD | Lg. | For Drill Bit Size | ID | OD | For Material Thick. | Size | Lg. | Direction | Material | Hardness | Each | |
0.0625" | 3/8" | 1/2" | 1/16" | 0.0001" to 0.0015" | 0.003" to 0.005" | 1/64"-3/8" | 3/8"-24 | 1/4" | Left Hand | 1144 Carbon Steel | Rockwell C59 | 0000000 | 000000 |
0.0938" | 3/8" | 1/2" | 3/32" | 0.0001" to 0.0015" | 0.003" to 0.005" | 1/64"-3/8" | 3/8"-24 | 1/4" | Left Hand | 1144 Carbon Steel | Rockwell C59 | 0000000 | 00000 |
0.125" | 3/8" | 1/2" | 1/8" | 0.0001" to 0.0015" | 0.003" to 0.005" | 1/64"-3/8" | 3/8"-24 | 1/4" | Left Hand | 1144 Carbon Steel | Rockwell C59 | 0000000 | 00000 |
0.1285" | 3/8" | 1/2" | No. 30 | 0.0001" to 0.0015" | 0.003" to 0.005" | 1/64"-3/8" | 3/8"-24 | 1/4" | Left Hand | 1144 Carbon Steel | Rockwell C59 | 0000000 | 00000 |
0.1406" | 3/8" | 1/2" | 9/64" | 0.0001" to 0.0015" | 0.003" to 0.005" | 1/64"-3/8" | 3/8"-24 | 1/4" | Left Hand | 1144 Carbon Steel | Rockwell C59 | 0000000 | 00000 |
0.1563" | 3/8" | 1/2" | 5/32" | 0.0001" to 0.0015" | 0.003" to 0.005" | 1/64"-3/8" | 3/8"-24 | 1/4" | Left Hand | 1144 Carbon Steel | Rockwell C59 | 0000000 | 00000 |
0.1875" | 3/8" | 1/2" | 3/16" | 0.0001" to 0.0015" | 0.003" to 0.005" | 1/64"-3/8" | 3/8"-24 | 1/4" | Left Hand | 1144 Carbon Steel | Rockwell C59 | 0000000 | 00000 |
0.1935" | 3/8" | 1/2" | No. 10 | 0.0001" to 0.0015" | 0.003" to 0.005" | 1/64"-3/8" | 3/8"-24 | 1/4" | Left Hand | 1144 Carbon Steel | Rockwell C59 | 0000000 | 00000 |
0.2188" | 1/2" | 1/2" | 7/32" | 0.0001" to 0.0015" | 0.003" to 0.005" | 1/64"-3/8" | 1/2"-20 | 1/4" | Left Hand | 1144 Carbon Steel | Rockwell C59 | 0000000 | 00000 |
0.25" | 1/2" | 1/2" | 1/4", E | 0.0001" to 0.0015" | 0.003" to 0.005" | 1/64"-3/8" | 1/2"-20 | 1/4" | Left Hand | 1144 Carbon Steel | Rockwell C59 | 0000000 | 00000 |
0.2656" | 1/2" | 1/2" | 17/64" | 0.0001" to 0.0015" | 0.003" to 0.005" | 1/64"-3/8" | 1/2"-20 | 1/4" | Left Hand | 1144 Carbon Steel | Rockwell C59 | 0000000 | 00000 |
0.2813" | 1/2" | 1/2" | 9/32" | 0.0001" to 0.0015" | 0.003" to 0.005" | 1/64"-3/8" | 1/2"-20 | 1/4" | Left Hand | 1144 Carbon Steel | Rockwell C59 | 0000000 | 00000 |
0.3125" | 1/2" | 1/2" | 5/16" | 0.0001" to 0.0015" | 0.003" to 0.005" | 1/64"-3/8" | 1/2"-20 | 1/4" | Left Hand | 1144 Carbon Steel | Rockwell C59 | 0000000 | 00000 |
0.375" | 5/8" | 1/2" | 3/8" | 0.0001" to 0.0015" | 0.003" to 0.005" | 1/64"-3/8" | 5/8"-18 | 1/4" | Left Hand | 1144 Carbon Steel | Rockwell C59 | 0000000 | 00000 |
Drill Bushings for Soft Metal and Wood
The serrations at the top of the bushing grip to prevent rotation and spin out. Install in a fixture for precise drilling.
Also Available: Other sizes. Please select 3377A999 and specify ID, OD, and length.
For technical drawings and 3-D models, click on a part number.
Tolerance | |||||||||
---|---|---|---|---|---|---|---|---|---|
OD | Lg. | For Drill Bit Size | ID | OD | Drill Bushing Type | Material | Hardness | Each | |
0.125" ID | |||||||||
5/16" | 5/16" | 1/8" | 0.0001" to 0.0004" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 000000 |
5/16" | 1/2" | 1/8" | 0.0001" to 0.0004" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.1563" ID | |||||||||
5/16" | 5/16" | 5/32" | 0.0001" to 0.0004" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
5/16" | 1/2" | 5/32" | 0.0001" to 0.0004" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.1875" ID | |||||||||
5/16" | 5/16" | 3/16" | 0.0001" to 0.0004" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
5/16" | 1/2" | 3/16" | 0.0001" to 0.0004" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
1/2" | 5/16" | 3/16" | 0.0001" to 0.0004" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 0000 |
1/2" | 1/2" | 3/16" | 0.0001" to 0.0004" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.1935" ID | |||||||||
5/16" | 3/8" | No. 10 | 0.0001" to 0.0004" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
5/16" | 1/2" | No. 10 | 0.0001" to 0.0004" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.2188" ID | |||||||||
1/2" | 1/2" | 7/32" | 0.0001" to 0.0004" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.25" ID | |||||||||
13/32" | 3/8" | 1/4", E | 0.0001" to 0.0004" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
1/2" | 5/16" | 1/4", E | 0.0001" to 0.0004" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 0000 |
1/2" | 1/2" | 1/4", E | 0.0001" to 0.0004" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.2656" ID | |||||||||
1/2" | 1/2" | 17/64" | 0.0001" to 0.0005" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.2813" ID | |||||||||
1/2" | 1/2" | 9/32" | 0.0001" to 0.0005" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.3125" ID | |||||||||
1/2" | 5/16" | 5/16" | 0.0001" to 0.0005" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 0000 |
1/2" | 1/2" | 5/16" | 0.0001" to 0.0005" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
1/2" | 3/4" | 5/16" | 0.0001" to 0.0005" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
5/8" | 3/4" | 5/16" | 0.0001" to 0.0005" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.375" ID | |||||||||
5/8" | 1/2" | 3/8" | 0.0001" to 0.0005" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
5/8" | 3/4" | 3/8" | 0.0001" to 0.0005" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
3/4" | 1/2" | 3/8" | 0.0001" to 0.0005" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
0.5" ID | |||||||||
3/4" | 1/2" | 1/2" | 0.0001" to 0.0005" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |
3/4" | 3/4" | 1/2" | 0.0001" to 0.0005" | -0.0002" to 0" | SP | 1144 Carbon Steel | Rockwell C61 | 00000000 | 00000 |