DIN 939 Setup Studs | McMaster-Carr

Filter by

System of Measurement

Thread Size

Thread Pitch

Threading

Threaded on Both Ends

Material

Thread Length

Thread Direction

Finish

Tensile Strength

60,000 psi to 79,999 psi

100,000 psi to 119,999 psi

120,000 psi or greater

Specifications Met

Thread Spacing

Hardness

Thread Type

Thread Fit

Metric Interference Sk6

DFARS Specialty Metals

Exempt

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

REACH

RoHS

Performance

135 Products

Threaded on Both Ends Setup Studs

Known as setup studs, these studs withstand sideways forces better than fully threaded studs because they have a strong unthreaded middle. The unthreaded middle also makes more contact with unthreaded holes, creating better alignment than a fully threaded stud.

Steel

DIN 939—Studs that meet DIN standards meet dimensional and material requirements. Thread Length (B) includes chamfer on DIN 938 and DIN 939 studs.

	Thread, mm
	Lg. (A)	Lg. (B)	Lg., mm	Tensile Strength, psi	Specs. Met		Each
M6 × 1 mm



		11	6	23.5	116,000	DIN 939	98867A250	00000


		15	6	27.5	116,000	DIN 939	98867A255	0000
		18	6	37.5	116,000	DIN 939	98867A260	0000
		18	6	47.5	116,000	DIN 939	98867A265	0000
		18	6	57.5	116,000	DIN 939	98867A270	0000


		M8 × 1.25 mm



				14	8	30	116,000	DIN 939	98867A310	0000


				19	8	35	116,000	DIN 939	98867A315	0000
				22	8	50	116,000	DIN 939	98867A320	0000
				22	8	60	116,000	DIN 939	98867A325	0000
				22	8	70	116,000	DIN 939	98867A330	0000


				M10 × 1.5 mm



						18	10	37	116,000	DIN 939	98867A350	0000


						26	10	62	116,000	DIN 939	98867A355	0000
						26	10	72	116,000	DIN 939	98867A360	0000
						26	10	92	116,000	DIN 939	98867A365	0000


						M12 × 1.75 mm



								23	13	45	116,000	DIN 939	98867A410	0000


								30	13	65	116,000	DIN 939	98867A415	0000
								30	13	75	116,000	DIN 939	98867A420	0000
								30	13	95	116,000	DIN 939	98867A425	0000
								30	13	115	116,000	DIN 939	98867A430	0000


								M16 × 2 mm



										27	18	55	116,000	DIN 939	98867A510	0000


										38	18	70	116,000	DIN 939	98867A515	0000
										38	18	85	116,000	DIN 939	98867A520	0000
										38	18	100	116,000	DIN 939	98867A525	0000
										38	18	120	116,000	DIN 939	98867A530	0000

Black-Oxide Steel

Black-oxide steel studs resist rusting in dry environments.

DIN 939—Studs that meet DIN standards meet dimensional and material requirements. Thread Length (B) includes chamfer on DIN 938 and DIN 939 studs.

	Thread, mm
	Lg. (A)	Lg. (B)	Lg., mm	Tensile Strength, psi	Specs. Met		Each
M6 × 1 mm



		20	20	50	125,000	DIN 939	93275A014	00000


		27	27	80	125,000	DIN 939	93275A019	0000
		31	31	110	125,000	DIN 939	93275A022	0000
		35	35	175	125,000	DIN 939	93275A028	0000


		M8 × 1.25 mm



				20	20	50	125,000	DIN 939	93275A030	0000


				20	20	65	125,000	DIN 939	93275A031	0000
				27	27	80	125,000	DIN 939	93275A032	0000
				31	31	95	125,000	DIN 939	93275A033	0000
				31	31	110	125,000	DIN 939	93275A034	0000
				35	35	140	125,000	DIN 939	93275A035	0000
				35	35	150	125,000	DIN 939	93275A036	0000
				35	35	175	125,000	DIN 939	93275A037	0000
				35	35	200	125,000	DIN 939	93275A038	0000


				M10 × 1.5 mm



						20	20	50	125,000	DIN 939	93275A039	0000


						20	20	65	125,000	DIN 939	93275A040	0000
						27	27	80	125,000	DIN 939	93275A041	0000
						31	31	95	125,000	DIN 939	93275A042	0000
						35	35	110	125,000	DIN 939	93275A043	0000
						35	35	125	125,000	DIN 939	93275A044	0000
						35	35	140	125,000	DIN 939	93275A045	0000
						35	35	150	125,000	DIN 939	93275A046	0000
						35	35	175	125,000	DIN 939	93275A047	0000
						35	35	200	125,000	DIN 939	93275A048	0000


						M12 × 1.75 mm



								20	20	50	125,000	DIN 939	93275A049	0000


								20	20	65	125,000	DIN 939	93275A050	0000
								27	27	80	125,000	DIN 939	93275A051	0000
								31	31	95	125,000	DIN 939	93275A052	0000
								39	39	110	125,000	DIN 939	93275A053	0000
								39	39	125	125,000	DIN 939	93275A054	0000
								39	39	140	125,000	DIN 939	93275A055	0000
								39	39	150	125,000	DIN 939	93275A056	0000
								39	39	175	125,000	DIN 939	93275A057	0000
								39	39	200	125,000	DIN 939	93275A058	0000


M16 × 2 mm



								21	21	80	125,000	DIN 939	93275A059	0000


								31	31	95	125,000	DIN 939	93275A060	0000
								47	47	110	125,000	DIN 939	93275A061	0000
								47	47	125	125,000	DIN 939	93275A066	0000
								47	47	150	125,000	DIN 939	93275A062	0000
								47	47	175	125,000	DIN 939	93275A063	0000
								47	47	200	125,000	DIN 939	93275A064	0000
		47						47	250	125,000	DIN 939	93275A065	00000
		47	47					300	125,000	DIN 939	93275A101	0000


		M20 × 2.5 mm



								27	27	80	125,000	DIN 939	93275A067	0000


								31	31	95	125,000	DIN 939	93275A105	0000
								47	47	110	125,000	DIN 939	93275A068	0000
								55	55	125	125,000	DIN 939	93275A108	0000
								55	55	150	125,000	DIN 939	93275A069	00000
								55	55	175	125,000	DIN 939	93275A070	00000
								55	55	200	125,000	DIN 939	93275A071	00000


				M24 × 3 mm



								39	39	100	125,000	DIN 939	93275A075	00000


								55	55	125	125,000	DIN 939	93275A076	00000
								63	63	150	125,000	DIN 939	93275A077	00000

18-8 Stainless Steel

18-8 stainless steel studs have good chemical resistance and resist rusting in humid, damp, and washdown areas. They may be mildly magnetic.

DIN 939—Studs that meet DIN standards meet dimensional and material requirements. Thread Length (B) includes chamfer on DIN 938 and DIN 939 studs.

	Thread, mm
	Lg. (A)	Lg. (B)	Lg., mm	Tensile Strength, psi	Specs. Met		Each
M6 × 1 mm



		10	8	23.5	70,000	DIN 939	92997A811	00000


		14	8	27	70,000	DIN 939	92997A812	0000
		18	8	32	70,000	DIN 939	92997A813	0000
		18	8	37	70,000	DIN 939	92997A814	0000
		18	8	42	70,000	DIN 939	92997A815	0000
		18	8	47	70,000	DIN 939	92997A816	0000
		18	8	57	70,000	DIN 939	92997A817	0000
		18	8	67	70,000	DIN 939	92997A818	0000


		M8 × 1.25 mm



				14	10	30	70,000	DIN 939	92997A819	0000


				19	10	35	70,000	DIN 939	92997A821	0000
				22	10	40	70,000	DIN 939	92997A822	0000
				22	10	45	70,000	DIN 939	92997A823	0000
				22	10	55	70,000	DIN 939	92997A824	0000
				22	10	60	70,000	DIN 939	92997A825	0000
				22	10	65	70,000	DIN 939	92997A826	0000
				22	10	70	70,000	DIN 939	92997A827	0000


				M10 × 1.5 mm



						13	12	32	70,000	DIN 939	92997A828	0000


						18	12	37	70,000	DIN 939	92997A829	0000
						23	12	42	70,000	DIN 939	92997A831	0000
						26	12	47	70,000	DIN 939	92997A832	0000
						26	12	57	70,000	DIN 939	92997A833	0000
						26	12	62	70,000	DIN 939	92997A834	0000

316 Stainless Steel

316 stainless steel studs resist corrosion from chemicals and salt water better than 18-8 stainless steel studs. They may be mildly magnetic.

DIN 939—Studs that meet DIN standards meet dimensional and material requirements. Thread Length (B) includes chamfer on DIN 938 and DIN 939 studs.

	Thread, mm
	Lg. (A)	Lg. (B)	Lg., mm	Tensile Strength, psi	Specs. Met		Each
M6 × 1 mm



		11	8	23.5	70,000	DIN 939	5580N111	00000


		15	8	27	70,000	DIN 939	5580N112	0000
		18	8	32	70,000	DIN 939	5580N113	0000
		18	8	37	70,000	DIN 939	5580N114	0000
		18	8	42	70,000	DIN 939	5580N115	0000
		18	8	47	70,000	DIN 939	5580N116	0000
		18	8	52	70,000	DIN 939	5580N117	0000
		18	8	57	70,000	DIN 939	5580N118	0000
		18	8	67	70,000	DIN 939	5580N119	0000


		M8 × 1.25 mm



				14	10	30	70,000	DIN 939	5580N121	0000


				19	10	35	70,000	DIN 939	5580N122	0000
				22	10	40	70,000	DIN 939	5580N123	0000
				22	10	45	70,000	DIN 939	5580N124	0000
				22	10	50	70,000	DIN 939	5580N125	0000
				22	10	55	70,000	DIN 939	5580N126	0000
				22	10	60	70,000	DIN 939	5580N127	0000
				22	10	65	70,000	DIN 939	5580N128	0000
				22	10	70	70,000	DIN 939	5580N129	0000


				M10 × 1.5 mm



						13	12	32	70,000	DIN 939	5580N131	0000


						18	12	37	70,000	DIN 939	5580N132	0000
						23	12	42	70,000	DIN 939	5580N133	0000
						26	12	47	70,000	DIN 939	5580N134	0000
						26	12	52	70,000	DIN 939	5580N135	0000
						26	12	57	70,000	DIN 939	5580N136	0000
						26	12	62	70,000	DIN 939	5580N137	0000

Vibration-Resistant Threaded on Both Ends Setup Studs

Also known as tap-end studs, inch setup studs have Class 5 friction-fit threads on one end to resist loosening and Class 2A standard threads on the other end for attaching a nut. Metric setup studs have Class SK6 friction-fit threads on one end to resist loosening and Class 6g standard threads on the other end for attaching a nut. They are ideal for machining applications where vibration can loosen clamps. They withstand sideways forces better than fully threaded studs because they have an unthreaded middle that is stronger than the threaded ends. The unthreaded middle also makes more contact with unthreaded holes, creating better alignment than a fully threaded stud. Remove studs with pliers to reuse them.

Steel

Image of Product. Front orientation. Contains Annotated. Setup Studs. Vibration-Resistant Threaded on Both Ends Setup Studs.

DIN 939—Studs that meet DIN standards meet dimensional and material requirements. Thread Length (B) includes chamfer on DIN 938 and DIN 939 studs.

	Thread
	Lg. (A), mm	Lg. (B), mm	Fit (A)	Fit (B)	Lg., mm	Tensile Strength, psi	Specs. Met		Each
M8 × 1.25 mm



		8	18	Metric Interference Sk6	Metric Class 6g	35	120,000	DIN 939	91059A510	00000


		8	22	Metric Interference Sk6	Metric Class 6g	45	120,000	DIN 939	91059A515	0000
		8	22	Metric Interference Sk6	Metric Class 6g	60	120,000	DIN 939	91059A520	0000
		8	22	Metric Interference Sk6	Metric Class 6g	70	120,000	DIN 939	91059A525	0000


		M10 × 1.5 mm



				10	18	Metric Interference Sk6	Metric Class 6g	37	120,000	DIN 939	91059A551	0000


				10	23	Metric Interference Sk6	Metric Class 6g	42	120,000	DIN 939	91059A556	0000
				10	26	Metric Interference Sk6	Metric Class 6g	52	120,000	DIN 939	91059A561	0000
				10	26	Metric Interference Sk6	Metric Class 6g	62	120,000	DIN 939	91059A566	0000


				M12 × 1.75 mm



						12	17	Metric Interference Sk6	Metric Class 6g	40	120,000	DIN 939	91059A605	0000


						12	27	Metric Interference Sk6	Metric Class 6g	50	120,000	DIN 939	91059A610	0000
						12	30	Metric Interference Sk6	Metric Class 6g	60	120,000	DIN 939	91059A615	0000
						12	30	Metric Interference Sk6	Metric Class 6g	70	120,000	DIN 939	91059A620	0000