McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    26 Products

    Quick-Disconnect (QD) Bushings

    Image of Product. Front orientation. Pulley and Sprocket Bushings. Quick-Disconnect (QD) Bushings, Clamp-On Shaft Mount.
    Image of Product. Front orientation. Pulley and Sprocket Bushings. Quick-Disconnect (QD) Bushings, Machinable Shaft Mount.
    Image of Attribute. Side1 orientation. Contains Annotated. Quick-Disconnect (QD) Bushings.

    Clamp-On Shaft Mount

    Machinable Shaft Mount

    The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys. Bushings fit quick-disconnect (QD) sprockets and pulleys of the same bushing trade number. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.
    304 Stainless Steel—304 stainless steel bushings resist corrosion from washdowns and humidity, so they’re common in food-processing plants and other frequently-cleaned areas. You can machine the center of these bushings to fit the exact dimensions of your shaft.
    Keyway
    For Max.
    Shaft Dia., mm
    Overall
    Wd.
    Wd.
    Dp.
    Fastener Tightening
    Torque, in·lbf
    Material
    Includes
    For Shaft
    Dia.
    Each
    Clamp-On Shaft Mount
     
    Bushing Trade Number SH
    —1 5/16"——108Sintered SteelClamping Screws1 11/16"6086K225000000
    —1 5/16"1/8"1/16"108Sintered SteelClamping Screws1/2"6086K21100000
    —1 5/16"3/16"3/32"108Sintered SteelClamping Screws5/8"6086K21200000
    —1 5/16"3/16"3/32"108Sintered SteelClamping Screws11/16"6086K22600000
    —1 5/16"3/16"3/32"108Sintered SteelClamping Screws3/4"6086K21300000
    —1 5/16"3/16"3/32"108Sintered SteelClamping Screws7/8"6086K21400000
    —1 5/16"1/4"1/8"108Sintered SteelClamping Screws15/16"6086K21500000
    —1 5/16"1/4"1/8"108Sintered SteelClamping Screws1"6086K21600000
    —1 5/16"1/4"1/8"108Sintered SteelClamping Screws1 1/16"6086K21700000
    —1 5/16"1/4"1/8"108Sintered SteelClamping Screws1 1/8"6086K21800000
    —1 5/16"1/4"1/8"108Sintered SteelClamping Screws1 3/16"6086K21900000
    —1 5/16"1/4"1/8"108Sintered SteelClamping Screws1 1/4"6086K22100000
    —1 5/16"5/16"5/32"108Sintered SteelClamping Screws1 5/16"6086K84800000
    —1 5/16"5/16"5/32"108Sintered SteelClamping Screws1 3/8"6086K22200000
    —1 5/16"3/8"1/16"108Sintered SteelClamping Screws, Machine Key1 7/16"6086K84900000
    —1 5/16"3/8"1/16"108Sintered SteelClamping Screws, Machine Key1 1/2"6086K22300000
    —1 5/16"3/8"1/16"108Sintered SteelClamping Screws, Machine Key1 5/8"6086K22400000
    —33 mm6 mm2.8 mm108Sintered SteelClamping Screws22 mm2344K7100000
    —33 mm8 mm3.3 mm108Sintered SteelClamping Screws24 mm2344K1100000
    —33 mm8 mm3.3 mm108Sintered SteelClamping Screws25 mm2344K1200000
    —33 mm8 mm3.3 mm108Sintered SteelClamping Screws28 mm2344K1300000
    —33 mm8 mm3.3 mm108Sintered SteelClamping Screws30 mm2344K1400000
    —33 mm10 mm3.3 mm108Sintered SteelClamping Screws32 mm2344K1500000
    —33 mm10 mm4 mm108Cast SteelClamping Screws35 mm2344K1600000
     
    Machinable Shaft Mount
     
    Bushing Trade Number SH
    4236 mm——108304 Stainless SteelClamping Screws13 mm2344K76000000
     

    Quick-Disconnect (QD) Weld-On Bushing-Bore Hubs

    Image of Product. Front orientation. Bushing-Bore Hubs. Quick-Disconnect (QD) Weld-On Bushing-Bore Hubs.
    These weld-on hubs are drilled, tapped, and taper-bored to make any sprocket, pulley, or gear compatible with our Quick-Disconnect (QD) Bushings.
    For Bushing
    Trade No.
    OD
    Overall
    Wd.
    Material
    Each
    SH3"13/16"Steel
    		5961K2000000
    back to top