Filter by
Shaft Diameter
Maximum Rotation Speed
System of Measurement
For Use With
Case Material
Material
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Case Color
Reinforcement Type
Spring Material
Hardness Rating
For Sealing
Loaded Type
Minimum Temperature
Maximum Pressure
Hardness
Maximum Temperature
Spring-Loaded Rotary Shaft Seals with Wiper Lip
Side 1
Profile
Side 2
Used to retain oil on rotating shafts in motors, pumps, bearings, and gearboxes, these seals have a secondary lip that blocks contaminants. Also known as oil seals, a spring secures the lip against the shaft, preventing messy leaks. Press-fit seals into the bore around the shaft. Seals with a maximum pressure of 50 psi should be secured with a retaining ring.
Seals with an acrylic-coated case have a coating that compensates for surface imperfections in the housing bore for a tight seal on the OD.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
Inch
For Bore | Case | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Dia. | Min. Wd. | Max. Speed, rpm | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Finish | Color | Specifications Met | Each | |
Buna-N Rubber with Steel Case and Spring | ||||||||||||
| 1 5/16" | 2.062" | 0.329" | 3,500 | 10 | -40° to 210° | Durometer 80A (Hard) | Black | Acrylic Coated | Green | DIN 3760, ISO 6194 | 00000000 | 000000 |