About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
About Tool Steel
More
About Composites
More
About Plastic
More
View a wire gauge conversion chart.
Lubricated 1080 Spring Steel Wire
- Heat Treatment: Hardened
- Tensile Strength: 261,000 psi
- Specifications Met: ASTM A228
Also known as music wire. This wire is coated with phosphate for corrosion resistance and lubricity. Use it for bundling and as tag wire. It will spring back after bending.
1 ft. Lg. | ||||||
|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Heat Treatment | Temperature Range | Pkg. Qty. | Pkg. | |
| 0.039" | -0.0005" to 0.0005" | Hardened | Not Rated | 100 | 0000000 | 000000 |
Spring-Back Multipurpose 304 Stainless Steel Wire
This wire bounces back after bending. Often used to construct springs and wire rope, 304 stainless steel is a good all-around choice for a wide range of applications.
PTFE-coated wire has a slippery surface, so it’s especially useful as a fish wire when navigating through confined spaces.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Heat Treatment: Hardened
- Tensile Strength: 205,000 psi
- Specifications Met: ASTM A313, ASTM A555
1 ft. Lg. | ||||||
|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Fabrication | Max. Temperature, °F | Pkg. Qty. | Pkg. | |
Matte | ||||||
| 0.039" | -0.001" to 0.001" | Cold Drawn | 570° | 100 | 0000000 | 000000 |
- Heat Treatment: Hardened
- Tensile Strength: Not Rated
- Specifications Met: ASTM A313
68" Lg. | |||||
|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Finish Color | Max. Temperature, °F | Each | |
| 0.039" | -0.0005" to 0.0005" | Gray | 500° | 0000000 | 000000 |
Hardened Undersized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Drill Bit Size | Lg. | Mechanical Finish | Straightness Tolerance | Each | |
| 0.039" | -0.0002" to 0" | 61 | 1 5/8" | Precision Ground | 0.012" per ft. | 00000000 | 00000 |
Hardened Oversized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
Also known as reamer blanks, these rods have an oversized diameter that allows for finishing to your exact requirements. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Reamer Size | Lg. | Lg. Tolerance | Mechanical Finish | Straightness Tolerance | Each | |
| 0.039" | 0" to 0.0002" | 61 | 1 5/8" | -1/32" to 1/32" | Precision Ground | 0.012" per ft. | 00000000 | 00000 |
Chemical-Resistant Slippery PTFE Rods and Discs
- Color: White
- Temperature Range: See table
- Tensile Strength: See table (Poor)
- Impact Strength: 3.5 ft.-lbs./in. (Good)
- Hardness: See table (Medium Soft)
- For Use Outdoors: Yes
- Specifications Met: See table
These rods and discs are made of PTFE, a material that surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures. In addition to resisting most solvents, they are an excellent electrical insulator. They are easy to machine and have a naturally slippery surface that makes them a good choice for bearings, gears, and parts that slide and roll.
For technical drawings and 3-D models, click on a part number.
| Dia. | Min. Dia. Tolerance | Max. Dia. Tolerance | Temp. Range, °F | Tensile Strength, psi  | Hardness | Specifications Met | Lg., ft. | Each | |
| 0.039" | -0.002" | 0.002" | -300° to 500° | 2,000-3,480 | Durometer 50D-65D | ASTM D3295, UL 94 V-0 | 25 | 00000000 | 000000 |
| 0.039" | -0.002" | 0.002" | -300° to 500° | 2,000-3,480 | Durometer 50D-65D | ASTM D3295, UL 94 V-0 | 100 | 00000000 | 00000 |
Ultra-Strength Lightweight Carbon Fiber Rods
- Color: Black
- Temperature Range: See table
- Tensile Strength: 120,000-175,000 psi (Excellent)
- Fiber Tensile Stiffness: Standard (33-36 msi)
- Impact Strength: Not Rated
- Hardness: Not Rated
- For Use Outdoors: No
Reinforce structures with these rods—they weigh less than aluminum while remaining strong and almost as rigid. Their fibers are aligned in a single direction, so they hold up to bending across the fibers but will splinter and separate like string cheese when bent along the length of the fiber. Carbon fiber is known for its use in the aerospace industry where a balance of weight and strength is vital.
For technical drawings and 3-D models, click on a part number.
36" Lg. | ||||
|---|---|---|---|---|
| Dia. | Dia. Tolerance | Temperature Range | Each | |
| 0.039" | -0.007" to 0.007" | 0° F to 250° F | 0000000 | 00000 |