About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
About Plastic
More
View a wire gauge conversion chart.
About Tool Steel
More
Lubricated 1080 Spring Steel Wire
- Heat Treatment: Hardened
- Tensile Strength: 261,000 psi
- Specifications Met: ASTM A228
Also known as music wire. This wire is coated with phosphate for corrosion resistance and lubricity. Use it for bundling and as tag wire. It will spring back after bending.
For technical drawings and 3-D models, click on a part number.
1 ft. Lg. | ||||||
|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Heat Treatment | Temperature Range | Pkg. Qty. | Pkg. | |
| 0.055" | -0.0005" to 0.0005" | Hardened | Not Rated | 100 | 0000000 | 000000 |
Hardened Undersized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Drill Bit Size | Lg. | Mechanical Finish | Straightness Tolerance | Each | |
| 0.055" | -0.0002" to 0" | 54 | 1 7/8" | Precision Ground | 0.012" per ft. | 00000000 | 00000 |
Hardened Oversized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
Also known as reamer blanks, these rods have an oversized diameter that allows for finishing to your exact requirements. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Reamer Size | Lg. | Lg. Tolerance | Mechanical Finish | Straightness Tolerance | Each | |
| 0.055" | 0" to 0.0002" | 54 | 1 7/8" | -1/32" to 1/32" | Precision Ground | 0.012" per ft. | 00000000 | 00000 |
Spring-Back Multipurpose 304 Stainless Steel Wire
This wire bounces back after bending. Often used to construct springs and wire rope, 304 stainless steel is a good all-around choice for a wide range of applications.
PTFE-coated wire has a slippery surface, so it’s especially useful as a fish wire when navigating through confined spaces.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Heat Treatment: Hardened
- Tensile Strength: 205,000 psi
- Specifications Met: ASTM A313, ASTM A555
1 ft. Lg. | ||||||
|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Fabrication | Max. Temperature, °F | Pkg. Qty. | Pkg. | |
Matte | ||||||
| 0.055" | -0.001" to 0.001" | Cold Drawn | 570° | 100 | 0000000 | 000000 |
- Heat Treatment: Hardened
- Tensile Strength: Not Rated
- Specifications Met: ASTM A313
68" Lg. | |||||
|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Finish Color | Max. Temperature, °F | Each | |
| 0.055" | -0.0005" to 0.0005" | Gray | 500° | 0000000 | 000000 |
Bend-and-Stay Economical 430 Stainless Steel Wire
When bent, this wire will stay in place. Widely used as tying and locking wire, this economical wire won’t stand up as well as other stainless steel wire when used outdoors or in extreme temperatures.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Temper Rating: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 70,000 psi
- Specifications Met: ASTM A580
- Temper Rating: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 70,000 psi
- Specifications Met: ASTM A580
1 ft. Lg. | |||||
|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Max. Temperature, °F | Pkg. Qty. | Pkg. | |
Matte | |||||
| 0.055" | -0.001" to 0.001" | 300° | 25 | 00000000 | 000000 |
Bend-and-Stay Corrosion-Resistant 316 Stainless Steel Wire
Bend this wire and it will stay in place. It's widely used as tying and locking wire. Made of 316/316L stainless steel, it has less carbon than standard 316 for better weldability. The addition of molybdenum gives this material excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Tensile Strength: 70,000 psi
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met: ASTM A580
- Tensile Strength: 70,000 psi
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 70,000 psi
- Specifications Met: ASTM A580
30 ft. Lg. | ||||
|---|---|---|---|---|
| Dia. | Dia. Tolerance | Max. Temperature, °F | Each | |
Matte | ||||
| 0.055" | -0.001" to 0.001" | 400° | 000000000 | 000000 |
- Tensile Strength: 70,000 psi
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 70,000 psi
- Specifications Met: ASTM A580
1 ft. Lg. | |||||
|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Max. Temperature, °F | Pkg. Qty. | Pkg. | |
Matte | |||||
| 0.055" | -0.001" to 0.001" | 400° | 25 | 000000000 | 000000 |
Chemical-Resistant Slippery PTFE Rods and Discs
- Color: White
- Temperature Range: See table
- Tensile Strength: See table (Poor)
- Impact Strength: 3.5 ft.-lbs./in. (Good)
- Hardness: See table (Medium Soft)
- For Use Outdoors: Yes
- Specifications Met: See table
These rods and discs are made of PTFE, a material that surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures. In addition to resisting most solvents, they are an excellent electrical insulator. They are easy to machine and have a naturally slippery surface that makes them a good choice for bearings, gears, and parts that slide and roll.
For technical drawings and 3-D models, click on a part number.
| Dia. | Min. Dia. Tolerance | Max. Dia. Tolerance | Temp. Range, °F | Tensile Strength, psi  | Hardness | Specifications Met | Lg., ft. | Each | |
| 0.055" | -0.002" | 0.002" | -300° to 500° | 2,000-3,480 | Durometer 50D-65D | ASTM D3295, UL 94 V-0 | 10 | 00000000 | 000000 |
| 0.055" | -0.002" | 0.002" | -300° to 500° | 2,000-3,480 | Durometer 50D-65D | ASTM D3295, UL 94 V-0 | 100 | 00000000 | 00000 |