We will reply to your message within an hour.
More
Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.
These rods are zinc galvanized for good corrosion resistance.
The chrome plating on these rods increases corrosion resistance.
These hex bars are hardened for increased abrasion and impact resistance. They are also stress relieved to reduce the chance of warping during machining.
Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as axles, shafts, collets, and die holders. It resists fracturing from repeated stress.
Use for power transmission and structural applications that involve extreme impact, heat, and wear.
A modified version of 4340 alloy steel, 300M is used in applications that require high yield strength, such as torsion bars and drive shafts.
Easier to machine than 52100 alloy steel rods, these extremely hard and wear-resistant tubes are often used to create bearings, bushings, and other cylindrical parts that are under constant stress. They’re also known as chrome steel.
Offering excellent resistance to cracking from impact and compression, C300 alloy steel is often used for dies and tooling. It is also known as maraging steel and VascoMax.
A vacuum arc remelting (VAR) casting process gives 9310 superior strength, hardness, and fatigue resistance over other types of alloy steel. It's often machined into heavy duty gears, clutch parts, and ratchets.
From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.
Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.
Offering outstanding resistance to surface wear and corrosion, Nitronic 60 stainless steel is often used for shafts, fasteners, and valves.
Hardened for improved strength and wear resistance, these rods are precision ground to a strict diameter tolerance. Use them for turning applications in your lathe.
With a higher chromium content than 15-5 PH stainless steel, this high-strength 17-4 PH offers better corrosion resistance. It is also known as 630 stainless steel.
This material is hardened for improved strength and wear resistance.
13-8 PH stainless steel can be hardened at lower temperatures than other heat-treatable types of stainless steel. It is widely used for fittings, pins, and lock washers.
The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.
One of the most machinable types of stainless steel available, 416 contains sulfur for fast machining without clogging cutting tools. It's used for gears, screws, and shafts.
One of the hardest types of stainless steel after heat treating, 440C offers excellent wear and abrasion resistance. It's often used for bearings, valves, and knife blades.
Often used for fasteners and valves, 410 stainless steel withstands wear caused by abrasion.
The titanium content of 321 stainless steel preserves corrosion resistance around weld points.
Also known as reamer blanks, these rods are hardened for increased abrasion and impact resistance.
Ready for turning in a lathe, these precision-ground rods have a tight diameter tolerance and are held to a strict straightness tolerance.
An oversized diameter allows for finishing to your exact requirements.
Made from powdered metal, M4 tool steel has a consistent microstructure that gives it outstanding resistance to wear and abrasion. It is comparable to CPM Rex M4.
Ready for turning in a lathe, these rods are precision ground to a tight diameter tolerance.
Ground and held to strict diameter and straightness tolerances, these rods are ready to be turned in a lathe.
Precision ground and held to a strict straightness tolerance, these rods are ready for turning in your lathe.
Furnished hardened, P20 tool steel is strong and easy to machine. It has the wear resistance and highly polishable surface needed to fabricate long-lasting molds and dies.
All set for turning in your lathe, these precision-ground rods are held to a strict straightness tolerance.
The diameter on these rods is precision ground while the straightness is held to a strict tolerance, so they're ready for turning in a lathe.
An oversized diameter on these rods allows for finishing to your exact requirements.
Resistant to wear, abrasion, and chipping, A11 is a hard material that is often made into punches and stamping tools.
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
Often used to make bearings and couplings in tough transportation, oil- and gas-drilling, and marine industries, these rods resist fatigue and corrosion. Also known as ToughMet™ 3 rods.
Often used in engines and heat exchangers, these 600 nickel rods can handle temperatures up to 1000° F. They also hold up to harsh chemicals and acids. 600 nickel is comparable to Inconel 600.
Turn and drill intricate components such as heat sinks, fixture parts, and other electronics parts where thermal stability is important.