We will reply to your message within an hour.
More
Three separate grit surfaces enable multistep sharpening with one stone.
The reservoir in the base keeps the stone clean and oiled.
Sets include an assortment of sharpening stones in different grits.
A different grit on each side enables multistep sharpening with one stone.
Quickly sharpen straight-blade tools.
Turn the dial to change the angle of the stones to match your blade.
Adjust the angle of the knife guide to match your blade.
Achieve razor-sharp edges with minimal effort.
Diamond particles embedded in the steel sharpen while straightening knife edges.
Align blade edges with these hand-held tools.
Use for occasional sharpening.
Good for when you need to sharpen bits regularly.
Sharpen straight-blade scissors.
Change the angle of the guide to match your blade. These tools have one sharpening wheel and one buffing wheel.
Quickly sharpen blades on tools such as chain saws, hoes, lawn mowers, and shovels. Use with a Dremel-style grinder.
Maintain tools, molds, and dies. These stones can be used by hand or in power tools with a compatible holder.
Each of these sets comes with four differently shaped stones.
Remove surface scale left by the EDM (electrical discharge machining) process.
Strong and wear-resistant, these thin bonded-ceramic stones have some give when pressure is applied.
Also known as Crystolon stones, these abrade quickly to create a smooth or extra-smooth finish.
The abrasive is specially treated for use on high-grade mold steels such as P-20, H-13, and 420 stainless steel.
The abrasive is specially treated for use on aluminum, brass, bronze, and other soft metal molds and dies.
Use these wheels for light grinding, deburring, and sharpening.
Designed to stand up to heavy use, these wheels remove more material than our general purpose grinding wheels.
The perforated honeycomb pattern cuts carbide, ceramics, and glass without the need for cleaning.
The silicon carbide abrasive in these wheels is suspended in rubber for a cushioned grind with light material removal.
The abrasive in these blocks wears evenly to maintain a flat surface. They can be used to remove burrs from metal die fixtures and machine parts or to clean magnetic chucks.
The rubber backing cushions the abrasive to prevent gouging your aluminum, soft metal, and nonmetal work surfaces.
Finish and polish metals without producing dust.
The backing cushions the abrasive to prevent gouging your work surface.
Access tight spots. These sticks are spring-loaded to hold a small sanding belt taut, but you can easily rotate the belt when it becomes worn.
Make blunt and sharp points.