Two-Grit Sharpening Stones

Filter by

Stone Shape

Stone Length

Stone Thickness

Grit

Stone Width

Number of Grits

Grit Rating

For Sharpening

Abrasive Material

For Finish

Lubrication

Length

Material

Stone Type

Blade Edge

REACH

Stone Diameter

RoHS

Compliant

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Color

Overall Length

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Stone Color

Container Type

Performance

58 Products

Sharpening Stones

Sharpen tools on your bench top. Use these sharpening stones with a water-soluble or oil-based lubricant.

Straight Rectangular Stone—For Straight Blade Edges

Two Grit

Two Grit—A different grit on each side enables two-step sharpening with one stone. First sharpen your blade with a lower grit, then sharpen again with a finer (higher) grit until the desired edge is achieved.

Aluminum Oxide Abrasive—Aluminum oxide cuts more slowly than silicon carbide for finer control. Also known as India stones.

Silicon Carbide Abrasive—Silicon carbide cuts quickly with light pressure. Also known as Crystolon stones.

Ceramic Alumina Abrasive—Extremely hard and wear resistant, these stones sharpen your hardest blades. They cut hard materials slower than cubic boron nitride (CBN) and diamond for finer control.

Novaculite Abrasive—Novaculite has extremely fine grains that cut very slowly for the most control over sharpening. Also known as Arkansas stones.

Oil Filled—No need to stop and clean these stones as you polish—they’re filled with oil to keep debris from getting stuck in their pores. You’ll also need an oil-based lubricant to wash away debris and reduce friction and heat on your workpiece.

Leather Pouch and Plastic Pouch—Store your stone in a pouch and slip it into your pocket when you're on the go.

	Stone
	Lg.	Wd.	Stone Thickness	Lubrication	Clog Resistance Method	Container Type	Grit (For Finish)		Each
Two Grit







				Aluminum Oxide × Aluminum Oxide

				3"	1 1/2"	1/2"	Required	—	Plastic Pouch	100 (Smooth) × 320 (Extra Smooth)	4506A7	000000


				4"	1 3/4"	5/8"	Required	Oil Filled × Oil Filled	—	100 (Smooth) × 320 (Extra Smooth)	4506A4	00000
				5"	2"	3/4"	Required	Oil Filled × Oil Filled	—	100 (Smooth) × 320 (Extra Smooth)	4506A8	00000
				6"	2"	1"	Required	Oil Filled × Oil Filled	—	100 (Smooth) × 320 (Extra Smooth)	4506A2	00000
				8"	2"	1"	Required	Oil Filled × Oil Filled	—	100 (Smooth) × 320 (Extra Smooth)	4506A3	00000
				11 1/2"	2 1/2"	1"	Required	Oil Filled × Oil Filled	—	100 (Smooth) × 320 (Extra Smooth)	4506A5	00000




						Aluminum Oxide × Novaculite

						6"	2"	1"	Required	Oil Filled	—	100 (Smooth) × 600 (Polished)	8738A11	00000




								Silicon Carbide × Aluminum Oxide

								6"	2"	1"	Required	Oil Filled × Oil Filled	—	150 (Smooth) × 320 (Extra Smooth)	8738A33	00000


								11 1/2"	2 1/2"	1"	Required	Oil Filled × Oil Filled	—	150 (Smooth) × 320 (Extra Smooth)	8738A54	000000




										Silicon Carbide × Silicon Carbide

										4"	1 3/4"	5/8"	Required	Oil Filled × Oil Filled	—	100 (Smooth) × 280 (Extra Smooth)	8739A12	00000


										5"	2"	3/4"	Required	Oil Filled × Oil Filled	—	100 (Smooth) × 280 (Extra Smooth)	8739A33	00000
										6"	2"	1"	Required	Oil Filled × Oil Filled	—	100 (Smooth) × 280 (Extra Smooth)	8739A13	00000
										8"	2"	1"	Required	Oil Filled × Oil Filled	—	100 (Smooth) × 280 (Extra Smooth)	8739A14	00000
										11 1/2"	2 1/2"	1"	Required	Oil Filled × Oil Filled	—	100 (Smooth) × 280 (Extra Smooth)	8739A15	00000




												Novaculite × Novaculite

												4"	2"	1/2"	Required	—	—	400 (Extra Smooth) × 800 (Polished)	6160A41	00000


												6"	2"	1/2"	Required	—	—	400 (Extra Smooth) × 800 (Polished)	6160A43	00000
												8"	2"	1/2"	Required	—	—	400 (Extra Smooth) × 800 (Polished)	6160A45	000000
												10"	2"	1/2"	Required	—	—	400 (Extra Smooth) × 800 (Polished)	6160A46	000000




														Ceramic Alumina × Ceramic Alumina

5"	1"													1/4"	Required	—	Leather Pouch	600 (Polished) × 1800 (Polished)	4456A18	00000

Straight Round Stone—For Straight Blade Edges

Aluminum Oxide Abrasive—Aluminum oxide cuts more slowly than silicon carbide for finer control. Also known as India stones.

Silicon Carbide Abrasive—Silicon carbide cuts quickly with light pressure. Also known as Crystolon stones.

	Lubrication	Clog Resistance Method		Each
Two Grit







	Aluminum Oxide × Aluminum Oxide

	4"	1"	100 (Smooth) × 320 (Extra Smooth)	Required	Oil Filled × Oil Filled	4506A1	000000




			Silicon Carbide × Silicon Carbide

			4"	1"	100 (Smooth) × 280 (Extra Smooth)	Required	Oil Filled × Oil Filled	8739A11	00000


			4"	1"	120 (Smooth) × 280 (Extra Smooth)	Required	—	8739A22	00000

Handheld Sharpening Stones

Grip by hand and sharpen tools at the angle you need.

Straight Rectangular Stone—For Straight Blade Edges

Silicon Carbide Abrasive—Silicon carbide cuts quickly with light pressure. Also known as Crystolon stones.

Suede Leather × Leather—Also known as strops, these leather-coated wooden stones create a razor-sharp, polished blade edge after you sharpen with other abrasives. First, sharpen with the suede leather side to remove any remaining microscopic burrs. Next, sharpen with the smooth leather side to refine the edge.

	Stone
	Lg.	Wd.	Stone Thickness	Stone Color	Lubrication	Overall Lg.	Handle Material	Includes	Grit (For Finish)		Each
Two Grit







				Silicon Carbide × Silicon Carbide

				10"	1 1/4"	3/4"	Dark Gray × Dark Gray	Required	14 3/4"	Wood	—	100 (Smooth) × 280 (Extra Smooth)	4513A23	000000




						Suede Leather × Leather

						8 1/2"	2 1/2"	7/8"	Brown × Brown	Required	13 1/4"	Wood	Angle Guide Buffing Compound	—	8502N11	00000

Straight Round Stone—For Straight Blade Edges

Round Stone with Finger

Groove Shown in Use

Round Stone

Round Stone with Finger

Groove

Silicon Carbide Abrasive—Silicon carbide cuts quickly with light pressure. Also known as Crystolon stones.

Finger Groove—A groove in the center shields your fingers while you sharpen.

	Stone Color	Lubrication	Features		Each
Two Grit







	Silicon Carbide × Silicon Carbide

	3"	1"	120 (Smooth) × 280 (Extra Smooth)	Blue × Gray	Required	—	4474A5	00000


	4"	1 1/2"	120 (Smooth) × 280 (Extra Smooth)	Dark Gray × Gray	Required	Finger Groove	4474A4	00000

Straight Contour Stone with 1 Groove—For Straight, Pointed, and Serrated Blade Edges

Cubic Boron Nitride Abrasive—Quickly cut hard materials with minimal pressure. These stones are extremely hard and wear resistant, so they sharpen your hardest blades.

Leather Pouch—Store your stone in a pouch and slip it into your pocket when you're on the go.

	Stone
	Lg.	Wd.	Stone Thickness	Grit (For Finish)	Lubrication	No. of Rounded Edges	Container Type		Each
Two Grit







				Cubic Boron Nitride × Ceramic Alumina

				5"	1"	1/4"	600 (Polished) × 1200 (Polished)	Required	4	Leather Pouch	8738A22	000000

Diamond Sharpening Stones

Sharpen blades of any material with the hardest and longest-lasting abrasive we offer. The diamond surface keeps its shape and finish without lubricants, so you can use these stones dry or with water. Rinse with water to clean.

Full Dimple Coverage

Straight Rectangular

Stone—For Straight Blade

Edges, Two Grit

Shallow dimples collect debris to prevent clogging the sharpening surface. These stones are a good choice for blade edges with defects that require heavy material removal. They also reduce friction and heat to protect delicate blades while you sharpen.

Antislip Feet and Antislip Mat—Keep the stone in place to maintain a steady angle while you sharpen.

			Stone
	Abrasive Grain Size	Grit (For Finish)	Lg.	Wd.	Lubrication	Overall Lg.	Includes		Each
Straight Rectangular Stone—For Straight Blade Edges







				Two Grit

				60 μm × 45 μm	180 (Smooth) × 240 (Extra Smooth)	8"	2 5/8"	Not Required	8"	Antislip Mat	4598A73	0000000


				60 μm × 45 μm	180 (Smooth) × 240 (Extra Smooth)	8"	2 5/8"	Not Required	12"	Antislip Feet Stone Holder	4598A83	000000
				60 μm × 45 μm	180 (Smooth) × 240 (Extra Smooth)	10"	4"	Not Required	12"	Antislip Feet Stone Holder	4598A93	000000
				45 μm × 25 μm	240 (Extra Smooth) × 320 (Extra Smooth)	8"	2 5/8"	Not Required	8"	Antislip Mat	4598A77	000000
				45 μm × 25 μm	240 (Extra Smooth) × 320 (Extra Smooth)	8"	2 5/8"	Not Required	12"	Antislip Feet Stone Holder	4598A84	000000
				45 μm × 25 μm	240 (Extra Smooth) × 320 (Extra Smooth)	10"	4"	Not Required	12"	Antislip Feet Stone Holder	4598A94	000000
				45 μm × 9 μm	240 (Extra Smooth) × 600 (Polished)	8"	2 5/8"	Not Required	12"	Antislip Feet Stone Holder	4598A85	000000
				45 μm × 9 μm	240 (Extra Smooth) × 600 (Polished)	10"	4"	Not Required	12"	Antislip Feet Stone Holder	4598A95	000000
				25 μm × 9 μm	320 (Extra Smooth) × 600 (Polished)	8"	2 5/8"	Not Required	12"	Antislip Feet Stone Holder	4598A86	000000
				25 μm × 9 μm	320 (Extra Smooth) × 600 (Polished)	10"	4"	Not Required	12"	Antislip Feet Stone Holder	4598A96	000000

Without Dimples

Straight Rectangular

Stone Two Grit

The dimple-free surface sharpens blades evenly every time. Since these stones have the most abrasive, they also remove material more quickly. However, debris can build up rapidly, so you’ll need to wipe them clean more often.

Antislip Mat—Keep the stone in place to maintain a steady angle while you sharpen.

			Stone
	Abrasive Grain Size	Grit (For Finish)	Lg.	Wd.	Lubrication	Overall Lg.	Includes		Each
Straight Rectangular Stone—For Straight Blade Edges







				Two Grit

				60 μm × 45 μm	180 (Smooth) × 240 (Extra Smooth)	8"	3"	Not Required	8"	Antislip Mat	8673N51	000000


				60 μm × 45 μm	180 (Smooth) × 240 (Extra Smooth)	11"	2 1/2"	Not Required	11"	Antislip Mat	8673N52	000000
				45 μm × 25 μm	240 (Extra Smooth) × 320 (Extra Smooth)	11"	2 1/2"	Not Required	11"	Antislip Mat	8673N55	000000
				45 μm × 11 μm	240 (Extra Smooth) × 600 (Polished)	6"	2"	Not Required	8"	Antislip Mat	8673N53	00000
				25 μm × 9 μm	320 (Extra Smooth) × 600 (Polished)	11"	2 1/2"	Not Required	11"	Antislip Mat	8673N58	000000
				19 μm × 4 μm	400 (Extra Smooth) × 1200 (Polished)	8"	3"	Not Required	10"	Antislip Mat	8673N57	00000
				11 μm × 4 μm	600 (Polished) × 1200 (Polished)	6"	2"	Not Required	8"	Antislip Mat	8673N56	00000
				11 μm × 4 μm	600 (Polished) × 1200 (Polished)	8"	3"	Not Required	10"	Antislip Mat	8673N54	00000

Handheld Diamond Sharpening Stones


Style B	Style C	Style F

Hold these stones with one hand to sharpen your blade at any angle. Our hardest and longest-lasting abrasive, diamond quickly sharpens blades of any material. Use these stones dry or with water. Rinse with water to clean.

Full Dimple Coverage

Style B

Style B—Fold the sharpening end into the handle for compact storage.

			Stone
	Abrasive Grain Size	Grit (For Finish)	Lg.	Wd.	Lubrication	Overall Lg.	Handle Material		Each
Style B—Straight Rectangular Stone for Straight Blade Edges







				Two Grit

				53 μm × 45 μm	220 (Smooth) × 240 (Extra Smooth)	4 3/8"	7/8"	Not Required	9 1/2"	Plastic	4598A57	000000


				45 μm × 23 μm	240 (Extra Smooth) × 360 (Extra Smooth)	4 3/8"	7/8"	Not Required	9 1/2"	Plastic	4598A58	00000
				23 μm × 8 μm	360 (Extra Smooth) × 800 (Polished)	4 3/8"	7/8"	Not Required	9 1/2"	Plastic	4598A59	00000

Without Dimples


Style C	Style F

Style C—Fold the sharpening end into the handle for compact storage.

			Stone
	Abrasive Grain Size	Grit (For Finish)	Lg.	Wd.	Lubrication	Overall Lg.	Handle Material		Each
Style C—Straight Rectangular Stone for Straight Blade Edges







				Two Grit

				40 μm × 11 μm	280 (Extra Smooth) × 600 (Polished)	3 5/8"	3/4"	Not Required	9"	Plastic	43735A21	000000


				Style F—Straight Rectangular Stone for Straight Blade Edges







								Two Grit

								125 μm × 30 μm	100 (Smooth) × 320 (Extra Smooth)	1"	3/8"	Not Required	5"	Aluminum	4511A17	00000


								75 μm × 30 μm	150 (Smooth) × 320 (Extra Smooth)	1"	3/8"	Not Required	5"	Aluminum	4511A18	00000
								53 μm × 30 μm	220 (Smooth) × 320 (Extra Smooth)	1"	3/8"	Not Required	5"	Aluminum	4511A19	00000
								30 μm × 19 μm	320 (Extra Smooth) × 400 (Extra Smooth)	1"	3/8"	Not Required	5"	Aluminum	4511A21	00000
								30 μm × 11 μm	320 (Extra Smooth) × 600 (Polished)	1"	3/8"	Not Required	5"	Aluminum	4511A22	00000

Water-Activated Sharpening Stones

Sharpen cutting edges faster and with less pressure than standard stones. Instead of applying a lubricant, add a few splashes of water to form an abrasive slurry. The slurry removes imperfections efficiently, exposing fresh grit as it forms.

For duller blades, sharpen with multiple stones, moving from coarser to finer grits. Use 220 grit to smooth away damage, 500 grit for the initial pass, 1200 grit for polishing, and 1400 grit for an ultra-fine, mirror-like finish.

Add a mat to catch the slurry and keep your work area clean.

Straight Rectangular Stone—For Straight Blade Edges

Image of Product. Front orientation. Sharpening Stones. Water-Activated Sharpening Stones, Straight Rectangular Stone—For Straight Blade Edges, Two Grit.

Two Grit

Silicon Carbide Abrasive—Silicon carbide cuts quickly with light pressure. Also known as Crystolon stones.

	Stone
	Lg.	Wd.	Stone Thickness	Grit (For Finish)	Lubrication	Container Type		Each
Two Grit







				Silicon Carbide × Silicon Carbide

				8"	3"	1"	220 (Smooth) × 500 (Polished)	Not Required	Plastic Case	8583N21	000000


				8"	3"	1"	500 (Polished) × 1200 (Polished)	Not Required	Plastic Case	8583N22	000000
				8"	3"	1"	1200 (Polished) × 1400 (Polished)	Not Required	Plastic Case	8583N23	000000

Sharpening Stone Truing Tools

Flatten sharpening stones after use with these tools. Diagonal grooves let debris escape so it doesn’t interfere with flattening.

Abrasive Material	Lg.	Wd.	Thk.	Lubrication	Container Type		Each
Silicon Carbide	9"	3"	3/4"	Not Required	Plastic Case	8583N201	000000