Filter by
Drive Style
Screw Size
Fastener Head Type
Rounded Head Style
Material
Rounded Head Profile
Oval Head Profile
About Tapping Screws
More
One-Way Rounded Head Screws for Sheet Metal
The S-shaped drive can be installed with a standard slotted driver, but requires a special tool for removal. Made from 18-8 stainless steel, these screws are chemical resistant and may be mildly magnetic. They penetrate 0.025" and thinner sheet metal. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head | |||||||
|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drill Bit Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel  | |||||||
No. 6 | |||||||
| 1/2" | 0.26" | 0.103" | No. 32 | 18 | 100 | 000000000 | 000000 |
| 3/4" | 0.26" | 0.103" | No. 32 | 18 | 100 | 000000000 | 00000 |
| 1" | 0.26" | 0.103" | No. 32 | 18 | 50 | 000000000 | 00000 |
No. 8 | |||||||
| 1/2" | 0.309" | 0.12" | No. 29 | 15 | 50 | 000000000 | 00000 |
| 3/4" | 0.309" | 0.12" | No. 29 | 15 | 50 | 000000000 | 00000 |
| 1" | 0.309" | 0.12" | No. 29 | 15 | 50 | 000000000 | 00000 |
| 1 1/4" | 0.309" | 0.12" | No. 29 | 15 | 50 | 000000000 | 00000 |
| 1 1/2" | 0.309" | 0.12" | No. 29 | 15 | 50 | 000000000 | 0000 |
No. 10 | |||||||
| 1/2" | 0.359" | 0.137" | No. 21 | 12 | 50 | 000000000 | 00000 |
| 3/4" | 0.359" | 0.137" | No. 21 | 12 | 50 | 000000000 | 00000 |
| 1" | 0.359" | 0.137" | No. 21 | 12 | 50 | 000000000 | 00000 |
| 1 1/2" | 0.359" | 0.137" | No. 21 | 12 | 50 | 000000000 | 00000 |
| 2" | 0.359" | 0.137" | No. 21 | 12 | 25 | 000000000 | 00000 |
No. 12 | |||||||
| 1/2" | 0.425" | 1/8" | 3/16" | 11 | 50 | 000000000 | 00000 |
| 3/4" | 0.425" | 1/8" | 3/16" | 11 | 25 | 000000000 | 00000 |
| 1" | 0.425" | 1/8" | 3/16" | 11 | 25 | 000000000 | 0000 |
| 1 1/2" | 0.425" | 1/8" | 3/16" | 11 | 25 | 000000000 | 00000 |
| 2" | 0.425" | 1/8" | 3/16" | 11 | 25 | 000000000 | 00000 |
No. 14 | |||||||
| 1/2" | 0.472" | 0.175" | 5.5 mm | 10 | 50 | 000000000 | 00000 |
| 3/4" | 0.472" | 0.175" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
| 1" | 0.472" | 0.175" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.472" | 0.175" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
| 2" | 0.472" | 0.175" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
| 3" | 0.472" | 0.175" | 5.5 mm | 10 | 10 | 000000000 | 00000 |
One-Way Oval Head Screws for Sheet Metal
The S-shaped drive can be installed with a standard slotted driver, but requires a special tool for removal. Made from 18-8 stainless steel, they are chemical resistant and may be mildly magnetic. Screws penetrate 0.025" and thinner sheet metal. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.