When used with liquid-tight fittings, this conduit seals out liquid. The steel core provides crush resistance, and the cover is UV light resistant.

The toughest liquid-tight flexible metal conduit we offer, this resists oil, chemicals, and extreme temperature fluctuations.

Run conduit in food areas—the cover can be cleaned and sterilized without weakening or splitting. This conduit meets NSF/ANSI standard 169 for special-purpose food equipment.

Join pieces of conduit.

This impact- and crush-resistant conduit is also known as galvanized rigid conduit (GRC).

Also known as intermediate metallic conduit (IMC), this is lighter in weight than thick-wall (rigid) steel conduit, yet it has the same strength.

Gaskets on the covers and at connection points protect against dust as well as seeping oil and coolant.

Protect wire and cable from dust, dirt, and oil/coolant dripping—this raceway is rated NEMA 12.

Sized for 22 mm and 30 mm push-button holes.

A circular groove quickly centers plug in unused holes and knockouts.

House electrical components in these general purpose enclosures.

No need to cut your own holes—these enclosures already have them to make installing push-buttons, switches, and indicating lights quick and easy.

With standard-size, evenly spaced, aligned push-button holes, these washdown enclosures save you the time and effort of cutting those holes yourself.

Fans built in to these enclosures keep electronics at the temperature you set, and the filtered intake and exhaust let cool air flow through the enclosure without letting water and contaminants in.

These enclosures are rated NEMA 13 for indoor protection from dirt and oil/coolant spraying.

Make your push buttons, switches, and indicating lights more visible and ergonomic to use. Enclosures mount on either of two sides, creating a 30° or 60° slanted surface.

Keep enclosures locked until the power is cut. A multipoint latch connects to a flange-mount disconnect switch (not included) to hold the door closed, preventing potential electrical shock.

Create a human-machine interface that’s designed to attach to a suspension arm, so you can move your HMI around.

The zinc plating on these tray systems offers good corrosion resistance.

Framed in aluminum T-slotted extrusions, these customizable machine guards provide multiple points of attachment for other components and structures.

Combine posts, panels, and doors to create a barrier around equipment.

Keep personnel safe from electric shock with ground fault protection.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.

Create a permanent outlet system without opening walls. These outlet strips mount to a wall with clips and hardwire to an existing electrical system.

More durable than plastic plugs, these provide the most protection from abrasion and impact. Use them to eliminate sharp edges and create a finished look on metal fence and machine-guard posts. Drive them in place with a hammer for a secure fit.

Keep chips and shavings from clogging or damaging unused holes on fixture plates in milling machines.

Also known as freeze plugs, these are commonly used to permanently seal the shallow holes left in a component during the casting process.

Give open-ended standoffs a finished look and protect them from dirt and debris.

Insert these plugs into the drive socket to block debris and provide a finished look.

If none of our standard guards fit your chain or belt system, we'll create one to suit your needs. Guards are steel and fit sprockets up to 48" apart.

A cage is welded to these ladders for quick installation.