Metric Press Fit Drill Bushings

Filter by

System of Measurement

Length

Drill Bit Size

Internal Chamfer

Drill Bushing Texture

Installation Permanence

Material

DFARS Compliance

Drill Bushing Type

Hardness

RoHS Compliance

Specifications Met

REACH Compliance

Forward

How can we improve?

476 Products

Metric Press-Fit Drill Bushings

Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part. Known for their versatility, drill bushings are also used as spacers, shims, and machinery bushings. These bushings are made of hardened, ground steel that holds its shape and resists wear, so they last for many cycles without needing to be replaced.

All bushings have a chamfer on the outside that centers the bushing as you place it into the hole. Press into place with a manual or hydraulic press. They also have internal chamfers, so it's easier to insert bits, pins, and punches into the bushing. Some bushings have internal chamfers on both ends, so no matter which end of the bushing is inserted into your jig, your bits, pins, and other tooling enter easily. Having an internal chamfer on the bottom of your bushing may cause shavings to get caught and bind as you remove the bit, however.

DIN 179 bushings meet dimensional and material standards that make sure they're compatible with other parts and tools. Although DIN 179 is no longer an active standard, it's still a common reference point for designers.

Don't see the size you need? Additional sizes are available.

For technical drawings and 3-D models, click on a part number.

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
0.5 mm ID
3	6	Both Ends	0.5 mm	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	000000	000000	000000
4	9	One End	0.50 mm	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.55 mm ID
4	9	One End	0.55 mm	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
0.95 mm ID
4	6	One End	0.95 mm	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	00000	0000
1 mm ID
3	6	One End	1 mm	0.006 to 0.016	0.004 to 0.01	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
3	9	One End	1 mm	0.006 to 0.016	0.004 to 0.01	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
4	6	One End	1 mm	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1 mm	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
1.05 mm ID
4	9	One End	1.05 mm	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
1.1 mm ID
4	6	One End	1.1 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
1.2 mm ID
4	6	One End	1.2 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4	9	One End	1.2 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
1.25 mm ID
4	9	One End	1.25 mm	0.002 to 0.008	0.019 to 0.027	-0.02 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
1.5 mm ID
4	6	One End	1.5 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4	9	One End	1.5 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	0000
1.55 mm ID
4	6	One End	1.55 mm	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
1.6 mm ID
4	6	One End	1.6 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4	9	One End	1.6 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	0000000	00000	00000	0000
1.65 mm ID
4	6	One End	1.65 mm	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
1.75 mm ID
4	6	One End	1.75 mm	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
4	9	One End	1.75 mm	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	00000	0000	0000
1.8 mm ID
4	6	One End	1.8 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	00000	0000	0000
4	9	Both Ends	1.8 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	00000	00000	00000
5	6	One End	1.80 mm	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	1.8 mm	0.002 to 0.008	0.019 to 0.027	-0.02 to 0.2	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
1.85 mm ID
5	9	One End	1.85 mm	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
1.9 mm ID
5	6	One End	1.9 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
2 mm ID
5	6	One End	2 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5	6	Both Ends	2 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	2 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	0000000	0000	0000	0000
5	9	Both Ends	2 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.05 mm ID
5	6	One End	2.05 mm	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.1 mm ID
5	6	One End	2.1 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
2.15 mm ID
5	9	One End	2.15 mm	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.3 mm ID
5	6	One End	2.3 mm	0.002 to 0.008	0.008 to 0.016	-0.4 to 0.4	PM	Steel	Rockwell C61	__	00000000	00000	00000	0000
2.4 mm ID
5	9	Both Ends	2.4 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.47 mm ID
10	20	One End	2.47 mm	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell B61	DIN 179	000000000	00000	00000	00000
2.48 mm ID
10	20	One End	2.48 mm	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell B61	DIN 179	000000000	00000	00000	00000
2.49 mm ID
10	20	One End	2.49 mm	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell B61	DIN 179	000000000	00000	00000	00000

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up
2.4 mm ID
5	9	One End	2.4 mm	0.006 to 0.016	0.008 to 0.016	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	00000	00000	00000
2.5 mm ID
5	6	Both Ends	2.5 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	6	One End	2.5 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
5	9	Both Ends	2.5 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	9	One End	2.5 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
10	20	One End	2.5 mm	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
2.51 mm ID
10	20	One End	2.51 mm	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
2.55 mm ID
5	9	One End	2.55 mm	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.6 mm ID
5	6	Both Ends	2.6 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
5	6	One End	2.6 mm	0.006 to 0.016	0.008 to 0.016	-0.1 to 0.1	PM	Steel	Rockwell C61	DIN 179	000000000	0000	0000	0000
6	8	One End	2.60 mm	0.002 to 0.008	0.019 to 0.027	-0.01 to 0.254	PM	Steel	Rockwell C61	__	000000000	0000	0000	0000
2.8 mm ID
6	16	One End	2.8 mm	0.006 to 0.016	0.008 to 0.016	-0.2 to 0.2	PM	Steel	Rockwell C61	DIN 179	000000000	00000	00000	00000
2.9 mm ID
6	12	One End	2.9 mm	0.006 to 0.016	0.008 to 0.016	-0.4 to 0.4	PM	Steel	Rockwell C61	__	0000000	0000	0000	0000
2.98 mm ID
10	20	One End	2.98 mm	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell B61	DIN 179	000000000	00000	00000	00000
2.99 mm ID
10	20	One End	2.99 mm	0.006 to 0.016	0.01 to 0.019	-0.2 to 0.2	PM	Steel	Rockwell B61	DIN 179	000000000	00000	00000	00000

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up

				Tolerance								Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness	Specifications Met		1-5	6-11	12-Up

				Tolerance							Each
OD, mm	Lg., mm	Internal Chamfer	For Drill Bit Size	ID, mm	OD, mm	Lg., mm	Drill Bushing Type	Material	Hardness		1-5	6-11	12-Up