Stay visible—even in dim light—and shielded from flames and arc flash hazards. These shirts meet NFPA 70E and NFPA 2112 standards for protecting your torso and arms against flash fire and electrical arc flashes. Choose shirts that meet the arc rated category required by your workplace. These shirts are rated Category 2, the most common rating for industrial applications. Bright in color and decked out with reflective strips, these shirts meet Class 3 ANSI/ISEA 107 to make you visible from a ¼ mile away. Use them around moving vehicles, on busy shop floors, and when operating machinery.

Made of cotton/nylon blend, these shirts are breathable and moisture wicking, so you won’t get too hot. They have concealed mesh vents on the back that let air in and keep you cool as you move.

When measuring chest size, measure around the fullest part of your chest.

These jackets meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These jackets are made of a durable modacrylic/aramid blend. They have a flap in the front that conceals the zipper.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

For protection from arc flash hazards, these kits include several of the safety items you may need. All items meet NFPA 70E for protection against flames and electrical arc flashes.

Choose clothing that meets the arc rated personal protective equipment (PPE) category required by your workplace. PPE Category 2 kits have the most common arc-flash-protection rating for industrial applications. Style B kits come with a hard hat, face shield, hood, coveralls, and two storage bags.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any garments you expect to wear under the protective clothing.

These overalls meet NFPA 70E for protection against flames and electrical arc flashes. They’re adjustable for a snug fit that shields skin from hazards while keeping you mobile—tighten and loosen the suspenders and secure cuffs around boots with hook and loop straps. Choose a bib overall that meets the arc rated personal protective equipment (PPE) category required by your workplace. The higher the arc rating, the greater the flame resistance.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these overalls.

Cotton/nylon overalls are rated Category 2 for protection against arc flashes, which is the most common rating for standard industrial applications. They are soft yet wear resistant, so they’re more breathable than modacrylic/aramid overalls. A water-resistant coating on these overalls keeps you dry. They have leg zippers, making it easy to pull the overalls over bulky boots. With hip slits on both sides, you can reach through to your pants pockets.

Modacrylic/aramid overalls are rated Category 4 to provide the highest level of protection from arc flashes. Made from the same material as the outer layer of a firefighter’s jacket, these overalls are extremely durable.

These coveralls meet NFPA 70E standards for protection against electrical arc flashes. Check the personal protection equipment (PPE) category and minimum arc rating provided for your workplace. PPE Category 2 is the most common rating for standard industrial applications, while PPE Category 4 provides the highest level of protection from arc flashes.

Modacrylic/aramid blend provides better resistance against arc flashes and is more durable than cotton.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under the coveralls.

Withstand flash fire for up to 8 seconds—the clothes in these kits can protect you for twice as long as most flame-resistant clothing. Made of rayon/aramid, the coveralls and mask absorb moisture to keep you cool and comfortable.

The coveralls have a 10 ft. Kevlar strap, so nearby teammates can pull you to safety without putting themselves at risk if there’s a fire. The reflective stripes keep you easy to see where there's low visibility. The zipper closure on the front is covered by a hook-and-loop flap so it doesn't scrape equipment or get hot. The legs have zippers on the sides as well, so you can fit them over bulky boots. Tighten the hook and loop straps on the bottom of the pants to keep flames out. The sleeves have cuffs with thumb holes to keep the sleeves in place and prevent flames from sneaking in.

Measure around the fullest part of your chest to determine your size. Take all measurements over any clothing you expect to wear under the coveralls.

Clothing kits cannot be sold to the listed areas due to product regulations.

These vests are fluorescent yellow with reflective stripes, so you’ll stand out in risky areas with low visibility. They're rated NFPA 70E to protect your torso against flames and arc flash. These vests meet ANSI/ISEA 107, so they've passed tests for visibility at high speeds and distances. That means you'll be seen by fast-moving vehicles or from across the shop floor.

Choose a vest that meets the arc rated personal protective equipment (PPE) category required by your workplace. The higher the arc rating, the greater the flame resistance. Wear these vests over flame-and arc-flash rated long-sleeve shirts or sweatshirts to meet the specified arc rating.

Vests that are rated PPE Category 1 provide light protection against arc flashes. Made of mesh acrylic, these vests are self-extinguishing. They are stitched with Nomex thread for added durability. They have hook and loop closures down the front and one waist pocket.

Vests that are rated PPE Category 4 provide the highest level of protection from arc flashes. Rated NFPA 2112, they also protect against flash fires. They’re made of modacrylic/aramid which is more durable and flame resistant than acrylic vests. You’ll stay dry thanks to the water-resistant coating. These vests have a lightweight and breathable cotton liner for added comfort. They have a zipper down the front, one chest pocket, and two waist pockets.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these vests.