Protect your feet when working around sharp objects, such as glass, nails, and scrap metal.

Higher deflection ratings translate to greater vibration and shock isolation.

A two-piece design requires less clearance than one-piece mounts and simplifies installation—raise your machine just enough to slide the base underneath, then insert the stud from above.

Bolt these mounts down to keep your equipment stationary.

Peel back the film to stick these feet to the bottom of furniture and equipment legs.

Use these feet on furniture with wood legs.

Made of neoprene rubber, these feet are a good choice for use in oily environments.

These feet are made of UHMW polyethylene plastic, so they won’t dry out and become brittle.

These feet have angled or rounded bottoms to work with tubular furniture legs that meet the floor at an angle.

Press these feet into tubular legs of tables, chairs, and other furniture.

Excellent chemical resistance makes these PTFE plastic feet the best choice for harsh environments.

Slip these inserts into tubular legs to quickly add threads for attaching leveling mounts. They’re often used in the legs of light equipment and furniture.

Rated for high load capacity, use these inserts to connect threaded leveling mounts to heavy equipment.

Well-suited to damp environments, these metric mounts have a stainless steel stud and nut for corrosion resistance.

An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base.

Broader, stronger threads enable faster adjustments and higher load capacities than standard V-shaped threads.

Well-suited to damp environments, these mounts have a stainless steel stud and nut for corrosion resistance.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Nickel-plated steel has some corrosion resistance.

Made of 303/304 stainless steel, these mounts resist corrosion from water and most chemicals.

Made entirely of 316 stainless steel, these mounts have superior corrosion resistance.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Meant for light duty applications, these mounts are not rated for capacity.

Use these metric mounts on heavy machines and equipment.

Install these mounts on machines without feet.

Able to withstand temperatures up to 350° F, these have the highest maximum temperature of our plastic mounts.

Often used on wobbly tables, these mounts automatically adjust up to 5/16" to compensate for uneven floors.

Made entirely of 316 stainless steel, these mounts are our most resistant to corrosion from chemicals, solvents, and water.

Nickel-plated steel has some corrosion resistance.

Well-suited to damp environments, these mounts have a stainless steel nut for excellent corrosion resistance.

Made of 303 stainless steel, these mounts resist corrosion from water and most chemicals.