A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Also known as strip or channel lights, the ends of these fixtures are designed to be wired together to create long rows of lights.

Maximize the light that reaches your shelving. Often used in storage rooms and warehouse rack rows, these lights have reflectors that direct all light downwards from ceilings up to 24 ft. high.

Link these lights together to create different shapes with a sleek look.

Powered by the sun, these lights illuminate outbuildings, shipping containers, and other remote places that lack electricity.

Light up spaces that have no electrical connection or are difficult to wire, such as sheds and closets.

Upgrade your fluorescent recessed lighting to energy-efficient LEDs without removing fixtures and exposing insulation.

Also known as pigtail holders. Temporarily wire these sockets to provide light during construction.

Customize these lights to label doors or areas of a building.

With more surface area than round bay lights, these fixtures produce softer light with less glare. Use them to replace old fluorescent lights and illuminate large, open areas with high ceilings.

Brighten large, open areas, such as warehouses and manufacturing spaces. IP rated and UL listed for wet locations, these lights are sealed against washdowns.

Upgrade your traditional fluorescent washdown lights—these LEDs last longer and eliminate the need to replace bulbs.

Illuminate areas that need frequent cleaning, such as food processing lines, with long rows of lights. Rated IP65, these lights have a sealed lens and liquid-tight end caps that protect them from low-pressure washdowns and dust.

Also known as troffers, these lights fit flush into most drop-ceiling grids. They’re fully sealed with an airtight gasket, so they’re rated IP65 for protection against low-pressure washdowns, humidity, and dust.

Brighten chemical plants, refineries, and other facilities where flammable and combustible gases, dust, or fibers may be present in the event of a leak or ventilation failure. These lights are rated for use in NEC Class I, II, and III, Division 2 hazardous locations.

Upgrade your existing hazardous location bay lights to energy-efficient LEDs.

Mount these lights in recessed spaces so the lens is flush with the ceiling or wall. NEC Classes I and II, they’re safe to use in paint spray booths, blast booths, and other areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust.

Contain explosions, sparks, and flashes—the enclosure on these ceiling lights makes them safe to use in NEC Class I and II, Division 1 hazardous locations.

Tough enough for offshore rigs and seafaring vessels—yet less than half the height of typical jelly jar lights. Built with a thick aluminum housing and a tough polycarbonate lens, these lights withstand hard impact without a guard.

Also known as sconces, these lights are a stylish choice for ambient and accent lighting in hallways and entryways. They’re UL or ETL listed for wet locations, so you can install them outdoors—rain and humidity won’t be a problem.

Prevent contaminants from entering your ISO Class 3 clean room—these lights have an airtight seal.

With a rounded, weighted base, these floodlights wobble—but don't fall over—when bumped.

Flood dark, remote jobsites with multiple tiers of light. These cordless lights stack on top of each other to focus a strong beam of light in one direction.

Brighten remote areas using the same battery as your other cordless Milwaukee tools.

Brighten areas of a jobsite with these floodlights, and move them at a moment’s notice.

Bring light to remote, wet areas. These floodlights are IP rated to handle humidity and dripping, splashing, and falling liquids. Adjust their tripod up and down to direct light as far as you need.

Our brightest plug-in floodlights, these lights illuminate large worksites—about the size of a hockey rink.

A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site.

Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors.

Light up large, open rooms where you need a quick setup and takedown, such as a room under construction. Just hang these lights from a ceiling up to 30' high and they’re ready to go.

A series of bulb heads are attached to a power cord to provide overhead lighting for job sites.

Bring light to areas that don't have electrical power service.

Splashes and drips are no problem for these lights. They don’t need an outlet, so you can bring them wherever you need them.

From pipes to pallet racks to control panels—these lights clamp onto almost anything and swivel to direct light just where you need it.

Safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust, these lights are rated NEC Class I, Class II, and Zone 1.

Flood hazardous areas with light—these lights are intrinsically safe, meaning they can’t cause an explosion or fire. Rated NEC Class I, II, III, and Zone 0, they’re safe to use in areas with ignitable concentrations of flammable or combustible gases, dust, and fibers.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting.

Add light to your work area without sacrificing desk space.

Gooseneck arms can be repositioned faster and more easily than articulating arms.

Pivot the head to cast a narrow beam of light to exactly where it's needed.

Though not as bright as our miniature fiber-optic lights, these lights are more affordable. With flexible arms, you can adjust these lights to direct light where you need it, even in hard-to-reach spots.

Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.

Illuminate machines or monitor processes in areas where flammable or combustible gases may be present, such as during leaks or ventilation failures. These lights are rated for use in NEC Class 1, Division 2 hazardous locations.

Update conventional fluorescent tubular lights with newer LED technology. These lights match the diameter of most older lights and fit existing brackets without the need to drill new mounting holes.

Illuminate machines and monitor processes where flammable and combustible gases, dust, or fibers are present—from paint spray booths to chemical plants. These lights have an enclosure that contains sparks, flashes, and explosions.

These low-profile lights stay out of sight when mounted under a cabinet. Use them to free up space on your work surface.

Hardwire these lights to a power source.

Guide pedestrians and drivers at night with lighting that defines paths and driveways. These lights produce ambient illumination without the glare of overhead lights.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces.

Heads adjust to any angle so you can direct light where needed.

Brighten enclosures and small spaces like closets and drawers—no hardwiring or outlets needed. Powered by a rechargeable battery, these lights are easy to install and help save on maintenance costs.

Communicate a status at a glance by wiring these strip lights to change color when a part is malfunctioning inside your enclosure.

Safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust, these lights are rated NEC Class I, II, and III.

With built-in LEDs, these lights deliver all the brightness of larger dock lights in a low-profile design. A hinge stop keeps the arm from extending past the dock door, and the curved design fits around the track.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you.

Light up work without risking an explosion. NEC rated, these headlamps are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

Drop these headlamps in water and they’ll still work—they’re IP rated to withstand submersion for at least 30 minutes.

Expand the reach of emergency backup lights. These add-on heads are often used to extend emergency lighting into stairwells, exits, and other remote areas.

Light the path toward exits where combustible gases and dust are constantly present—the enclosure on these lights contains sparks and flashes to prevent a reaction with nearby hazards. They’re often found in extreme environments, such as refineries and chemical plants.

A gasket seals the enclosure of these backup lights from washdowns.