Designed with a thin, compact housing, these bearings are good for space-constrained applications.

An elongated mounting hole on one side of the flange lets you adjust the position of these bearings without having to remove your shaft.

The lubricant in these mounted ball bearings is NSF registered H1 and FDA compliant for incidental contact with food.

Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.

Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.

Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.

Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings.

These bearings have the highest speed ratings of any mounted ball bearing in our offering.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.

With no moving parts, sleeve bearings are better for dirty environments than ball and roller bearings.

Rated IP69K for washdowns, these bearings stand up to frequent cleanings in food, beverage, pharmaceutical, and chemical plants.

Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel.

Use these carriages and guide rails for light loads where precise movement is not required.

C-shaped guide rails grip the carriage around the outside to support linear motion along walls and other vertical surfaces.

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.