Mount a sign to a 1 1/8" to 1 3/4" diameter post.

Use these bases to hold a sign post.

These posts include a base that's portable, but hard to knock over.

Reduce damage to signs, parking lot surfaces, and vehicles, these posts rebound after contact.

Mount these holders with tape or adhesive.

Suction cups allow you to mount these holders to glass and other smooth surfaces.

Wrap the strap of these holders around an object with a 1" dia. or less and secure with the magnetic snaps.

Also known as document protectors, these holders have a hole at the top for hanging.

Slide a sign into the side of these holders.

Insert a sign, then snap the sides closed.

Lock the frame to protect your signs from tampering.

The sleeve protects signs and allows you to swap material in and out.

These holders come with a cover to protect signs from smudging and wear.

View signs or documents on both sides of these holders.

Specify the message you'd like printed on your sign.

Communicate two- or four-way stops with one freestanding stop sign.

Post these portable signs to alert drivers to temporary construction zones and then roll them up when not in use.

Designate parking spaces that are accessible.

Alert other drivers about the size of your vehicle or load.

Visually identify a slow-moving vehicle.

A reference chart explains the NFPA (National Fire Protection Association) colors and number designations for hazards. Provide the appropriate code number using the NFPA diamond.

Similar to a Safety Data Sheet (SDS), these signs keep workers informed about chemical and gas usage, warnings, and treatment in the event of exposure.

Alert others to the presence of chemicals such as carbon monoxide, tobacco smoke, and wood dust.

The illustrations on these signs help workers identify hazards at a glance.

Clearly define dangerous areas such as construction zones and welding areas to restrict access to only authorized personnel.

Stack these signs when not in use. They have the same message printed on all four sides to help prevent accidents around slippery floors.

Fold these signs flat when not in use. They have the same message on all sides to help prevent accidents around slippery floors and tripping hazards.

Help prevent accidents in areas with slippery floors, tripping hazards, or low headroom.

The illustrations on these signs help workers identify tripping hazards at a glance.

These signs have the same message on each side. Place them where needed to clearly define and restrict access to dangerous areas, then fold them when not in use.

Write a message in the blank space below the header using a permanent marker or adhesive-back characters.

For spaces where you can’t mount to a wall, these signs stand on tables or floors to remind people to social distance or wear a mask, preventing the spread of illness. Fold flat to store.

The illustrations on these signs help workers identify confined areas at a glance.

Remind your team to lock out machines during maintenance work to avoid accidental startups.

Communicate dangers to workers near moving equipment that could cause injury.

The illustrations on these signs help workers identify safety reminders at a glance. Use them to designate areas that require personal protective equipment, such as safety glasses, earmuffs, and face masks.

These signs can be read when viewed in a rearview mirror.

Designate areas that require personal protective equipment such as safety glasses and earmuffs.

The illustrations on these signs help you identify electrical hazards at a glance.

Mount these signs perpendicular to the wall to view the same message on each side.

Unroll the length you need and cut with scissors.

Metal signs are more durable than plastic signs.

Rated NEC Classes I and II, these exit signs are safe to use in areas with flammable or combustible gases, vapors, and dust. Their housing is designed to contain any fire and sparks, so they don’t ignite what’s in your environment.

No electricity or batteries needed—expose these signs to ambient light and they stay visible in the dark.

Use the included bracket to mount these signs perpendicular to a wall or ceiling. They meet UL 924 regulations for visibility.

Identify the location of exits throughout a facility.

These signs are lit from within for high visibility. They meet UL 924 regulations for visibility.

Point personnel to first-aid equipment in case of an emergency.

Mark emergency meeting spots with these highly visible signs.

These signs meet federal regulations for the visually impaired and help comply with the Americans with Disabilities Act (ADA) when installed properly.

Label a department or location in the blank space under the arrow.

Expose these signs to ambient light and they stay visible in the dark.

Engraved letters and beveled edges provide a polished look.

Compliant with ADA regulations for the visually impaired, these signs clearly label various areas throughout an office.

These signs project from the wall so the same message is viewable from multiple angles.

Mark the location of fire alarms, extinguishers, and other fire safety equipment, so you can find them quickly in an emergency.

Designate entrances and areas that are accessible.

Mark entrances, employee-only work areas, and no-trespassing zones.

Communicate smoking policies.

Motivate employees to follow good work and safety practices.

Define lockout and tagout procedures to help prevent unexpected startups during machine maintenance and repair work.

Keep workers informed about globally harmonized system (GHS) symbols and when to use them.

Communicate hand signals for directing crane operation.

These label holders snap on to heavy duty vented plastic shelving for a secure fit, and snap off easily when you want to reposition them.

Snap these holders onto Eagle, Intermetro, and Nexel wire shelving.

The thin matte surface on these holders reduces glare, making it easier for scanners to read bar codes.

Stick these label holders to a clean, dry surface.

Slip labels in and out from the bottom of these holders.

No need to drill holes in panels—tighten the set screw to hold them in place.

Often used in washrooms, these brackets mount panels and partitions.

These brackets come in one piece that can be cut-to-size with a hacksaw.

Interlock brackets to secure panels flush to flat surfaces.

For use with a single line, these plastic clamps reduce wear on softer materials, such as tubing and cable, and prevent corrosion caused by metal-to-metal contact.

Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.