In addition to withstanding temperatures up to 450° F, these silicone rubber gaskets resist water and salts.

Inherently sticky, this silicone gel material conforms to irregular surfaces and stays in place for an effective moisture barrier.

In addition to withstanding temperatures up to 450° F, these silicone rubber gasket sheets resist water and salts.

If a piece wears off, fragments as small as 1 mm can be picked up by a metal-detection system to prevent contamination of your process line.

Use these perforated gaskets to filter liquids and dry materials, as well as create a tight seal in quick-clamp stainless steel sanitary tube fittings. Made of silicone, they handle temperatures up to 450° F, so they’re good for heated ingredients and clean-in-place (CIP) processes.

Both the FEP casing and the silicone core are made of FDA-listed material. These gaskets resist vegetable and mineral oils, as well as acids and detergents.

These gaskets absorb electromagnetic interference (EMI) and radio frequency interference (RFI) to prevent inaccurate signals, flickering displays, and other electrical problems.

The hollow construction on these seals provides better compressibility than solid rubber seals. Made of silicone rubber, they also resist water and salts.

Made of solid silicone rubber and tested to meet strict NFPA fire standards, these seals can be used on fire-rated doors in environments that reach up to 600° F.

It’s the hollow construction that makes these seals more compressible than solid seals. Made of silicone foam rubber, they also resist water and salts.

Able to withstand temperatures up to 500° F, these all-rubber silicone seals resist water and salts.

Seal food areas that can reach temperatures up to 375° F.

Made of silicone rubber, these seals can handle temperatures up to 500° F, plus they resist water and salts.

Hollow construction makes these seals more compressible than solid seals.

These seals have solid construction.

The FEP casing on these O-rings provides the same level of resistance to harsh chemicals as PTFE O-rings, but the core material is soft to make these O-rings more compressible.

Flexible even at temperatures as low as -75° F, these fluorosilicone O-rings will keep your fittings free from leaks. They’re often used on fuel and coolant hose because fluorosilicone resists many chemicals, including ethanol and ethylene glycol.

These silicone O-rings withstand temperatures up to 400° F or 450° F.

These square-profile O-rings have flat edges on all four sides, so they cover more surface than round-profile O-rings for a better seal in static applications, such as hose, pipe, and faucet connections.

Also known as Boss O-rings, these O-rings are for use in tube fittings with a straight-thread connection.

This cord stock is softer and creates a better seal than standard silicone cord stock in low-pressure applications up to 400° F.

Create round-profile O-rings for sealing applications near ovens and other hot areas in your food plant.

These assortments include a mix of EPDM O-rings that resist water and steam and silicone O-rings that resist temperatures up to 450° F.

Silicone maintains its flexibility across a wide range of temperatures.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

One layer of fiberglass fabric is sandwiched between layers of silicone foam giving these strips strength to handle high-stress applications, such as gasketing.

Seal and damp vibration around high-temperature food-service equipment with these silicone foam sheets and strips.

Even after extended compression, these sheets and strips will bounce back to shape.

Protect sensitive equipment from heat buildup with this silicone foam. These sheets are commonly used to fill gaps and damp vibration in computers, battery installations, and pipe assemblies.

These silicone foam cords meet NSF/ANSI 51 for food equipment materials. Use them to seal and cushion narrow spaces in food service equipment.

These platinum-cured silicone rubber sheets and strips meet the strict purity standards of USP Class VI.

Filled with carbon black, these sheets won’t generate static charges and divert existing ones away from electronics. Use them as a conductor to protect components from static discharge.

These flexible grommets withstand temperatures of 450° F or greater, which is approximately twice as high as our standard grommets. Push them into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

This trim withstands temperatures up to 450° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

Sunlight, ozone, and water won’t affect these washers.

These washers are rated to withstand pressure up to 100 psi.

Made from silicone, these sealants are RTV (room-temperature vulcanizing).

Resistant to mold and mildew, these sealants are well suited to high-humidity environments.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Make tough, flexible, oil-resistant seals.

These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

Make seals that support glass under heavy loads in equipment and buildings.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Wrap this tape tightly around pipe and other surfaces to seal cracks and joints without having to shut down your system.