McMaster-Carr logo
    Filter by
    Manufacturer
    For Use With
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    31 Products

    Food and Beverage Dry-Film Lubricants

    Image of Product. Front orientation. Dry-Film Lubricants. Food and Beverage Dry-Film Lubricants.
    Use these NSF registered H1 lubricants in food-processing and preparation areas with a risk of incidental food contact. They form a nonstick film that won't attract contaminants, such as flour.
    Silicone Rubber Additive—Lubricants with silicone rubber can be used with plastic.
    Container
    Each
    Package
    Net Wt.,
    oz.
    Type
    Additive
    Temp.,
    ° F
    Food Industry Std.
    Each
    Pkg.
    Qty.
    Pkg.
    Sprayon LU 211 Food Grade Dry Silicone
    13 1/4Aerosol CanSilicone Rubber
    		-40 to 450FDA Compliant 21 CFR 178.3570, NSF Registered H11155K36000000121155K370000000
     

    Penetrating Lubricants

    Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.
    LPS
    Image of Product. Front orientation. Penetrating Lubricants. Penetrating Lubricants, LPS, Aerosol Can.
    Image of Attribute. Front orientation. LPS. Penetrating Lubricants.

    Aerosol

    Can

    LPS Silicone—LPS Silicone dries to leave a clear, dry film that protects and lubricates. These silicone lubricants are NSF registered H1 for incidental food contact.
    Silicone Rubber Additive—Lubricants with silicone rubber are clear, have excellent moisture resistance, and can be used on most rubber and plastic.
    Cannot Be Sold To—Lubricants that cannot be sold to the listed areas are restricted due to import regulations, product labeling requirements, or regulatory limits on VOCs (volatile organic compounds).
    Container
    Temp.,
    ° F
    Each
    Package
    Net Wt.,
    oz.
    Type
    Additive
    Min.
    Max.
    Food Industry
    Std.
    Cannot Be Sold To
    Each
    Pkg.
    Qty.
    Pkg.
    LPS Silicone
    13Aerosol CanSilicone Rubber
    		-40390NSF Registered H1
    		Outside United States13805K530000001213805K5320000000
     
    DuPont
    Image of Product. Front orientation. Penetrating Lubricants. Penetrating Lubricants, DuPont, Aerosol Can.
    Image of Attribute. Front orientation. DuPont. Penetrating Lubricants.

    Aerosol

    Can

    DuPont® Silicone Lubricant—DuPont® Silicone Lubricant repels moisture and is nonstaining.
    Silicone Rubber Additive—Lubricants with silicone rubber are clear, have excellent moisture resistance, and can be used on most rubber and plastic.
    Boron Nitride Additive—Lubricants with boron nitride last long and cure to a semi-dry film that resists corrosion from salt water and won’t wash off.
    Container
    Temp.,
    ° F
    Each
    Package
    Net Wt.,
    oz.
    Type
    Additive
    Min.
    Max.
    Each
    Pkg.
    Qty.
    Pkg.
    DuPont® Silicone Lubricant
    14Aerosol CanSilicone Rubber, Boron Nitride-404008710T70300000068710T74000000
     
    3M
    Image of Product. Front orientation. Penetrating Lubricants. Penetrating Lubricants, 3M, Aerosol Can.
    Image of Attribute. Front orientation. 3M. Penetrating Lubricants.

    Aerosol

    Can

    3M Silicone—3M Silicone dries fast and is nonstaining.
    Silicone Rubber Additive—Lubricants with silicone rubber are clear, have excellent moisture resistance, and can be used on most rubber and plastic.
    Container
    Temp.,
    ° F
    Each
    Package
    Net Wt.,
    oz.
    Type
    Additive
    Min.
    Max.
    Each
    Pkg.
    Qty.
    Pkg.
    3M Silicone
    12 3/4Aerosol CanSilicone Rubber
    		2535031155K3660000001231155K3670000000
     

    Food and Beverage Penetrating Lubricants

    Image of Product. Front orientation. Penetrating Lubricants. Food and Beverage Penetrating Lubricants, Aerosol Can.

    Aerosol

    Can

    For use in food-processing and preparation areas, these thin, multipurpose lubricants are NSF registered H1 for incidental food contact. Use them to cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment.
    Silicone Rubber Additive—Lubricants with silicone rubber are clear, have excellent water resistance, and can be used on rubber. Not for use on painted surfaces.
    Cannot Be Sold To—Lubricants cannot be sold to the listed areas due to product regulations.
    Container
    Each
    Package
    Net Wt.,
    oz.
    Type
    Additive
    Temp. Range,
    ° F
    Food Industry
    Std.
    Cannot Be Sold To
    Each
    Pkg.
    Qty.
    Pkg.
    Sprayon LU 210 Food Grade Dry Silicone
    10Aerosol CanSilicone Rubber
    		-40 to 450NSF Registered H1
    		—1155K41000000121155K420000000
     
    Other Penetrating Lubricants
    11Aerosol CanSilicone Rubber
    		-55 to 390NSF Registered H1
    		California, New York1408K3400000121408K343000000
     

    Conveyor Rail and Chute Dry-Film Lubricants

    Image of Product. Front orientation. Dry-Film Lubricants. Conveyor Rail and Chute Dry-Film Lubricants.
    Prevent packages from sticking on conveyor rails and chutes.
    Silicone Rubber Additive—Made with silicone rubber, use these lubricants to create a slippery dry film that won’t attract dust where metal and non-metal surfaces meet.
    Cannot Be Sold To—Product labeling requirements restrict sales to the listed areas.
    Container
    Each
    Package
    Net Wt.,
    oz.
    Type
    Additive
    Temp.,
    ° F
    Cannot Be Sold To
    Each
    Pkg.
    Qty.
    Pkg.
    Lubricants
    11Aerosol CanSilicone Rubber
    		-15 to 400Outside United States2163N11000000122163N120000000
     

    Dry-Film Lubricants

    Image of Product. Front orientation. Dry-Film Lubricants. Dry-Film Lubricants, Aerosol Can.

    Aerosol

    Can

    These lubricants go on wet for easy application. Once dry, they form a nonstick film that won't attract dust. Use them for general purpose lubricating in most applications.
    Molykote 557 Silicone Dry Film—DuPont Molykote 557 Silicone Dry Film is often used on blades to keep them sharp longer.
    Silicone Rubber Additive—Lubricants with silicone rubber are clear, have excellent water resistance, and can be used on most rubber and plastic.
    Container
    Each
    Package
    Size, fl.
    oz.
    Type
    Additive
    Temp.,
    ° F
    Each
    Pkg.
    Qty.
    Pkg.
    DuPont Molykote 557 Silicone Dry Film
    11Aerosol CanSilicone Rubber
    		-40 to 1101254K12000000121254K1210000000
     

    Overhead Door Dry-Film Lubricants

    Image of Product. Front orientation. Dry-Film Lubricants. Overhead Door Dry-Film Lubricants.
    Spray these wear-resistant lubricants on rollers, hinges, and tracks of overhead doors to reduce friction and noise.
    Silicone Rubber Additive—These silicone rubber lubricants repel water for use outdoors. Once dry, they form a thin lubricating layer that won’t rub off or attract dust.
    Container
    Each
    Package
    Net Wt.,
    oz.
    Type
    Additive
    Temp.,
    ° F
    Each
    Pkg.
    Qty.
    Pkg.
    Lubricants
    9.3Aerosol CanSilicone Rubber
    		0 to 1202297N1100000122297N12000000
     

    Food and Beverage Grease

    Image of Product. Front orientation. Grease. Food and Beverage Grease, Aerosol Can.

    Aerosol

    Can

    Use this grease in food-processing and preparation areas.
    Grease lubricates most efficiently within the listed temperature range.
    Silica Thickener—Grease with silica thickener has excellent heat and moisture resistance and good oxidation resistance.
    2 NLGI Grade—NLGI 2 is about the consistency of peanut butter.
    Synthetic Oil Base—Synthetic-oil-based grease lasts longer than mineral-oil-based grease and generally withstands a wider range of temperatures.
    PTFE Additive—Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity.
    NSF Registered H1—Grease that is NSF Registered H1 is rated for incidental contact with food.
    Melting Temperature—Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
    Cannot Be Sold To—Grease cannot be sold to the listed areas due to product regulations.
    Container
    Temp.,
    ° F
    Each
    Package
    NLGI Consistency
    Grade
    Base Oil
    Additive
    Net Wt.,
    oz.
    Type
    Min.
    Max.
    Melting
    Temp.
    Color
    Food Industry
    Std.
    Cannot Be Sold To
    Each
    Pkg.
    Qty.
    Pkg.
    Silica Thickener
    2
    		Synthetic OilPTFE
    		11Aerosol Can-45450Not RatedWhiteNSF Registered H1
    		California, New York1378K32000000121378K3220000000
     

    Conformal Coatings

    Image of Product. Front orientation. Conformal Coatings. Conformal Coatings, Aerosol Can.

    Aerosol

    Can

    These coatings protect circuit boards and other electronics from moisture, dust, and static. They’re thinner than potting compounds, so they flow into the smallest contours of your components to cover them completely. Apply these coatings without needing a potting box or other container. You can remove them if necessary.
    Silicone Rubber—Silicone rubber coatings protect components over a wide range of temperatures. They’re also the most flexible of our conformal coatings, so they won’t crack from vibration. However, they’re thicker than acrylic coatings, so they’re more difficult to apply and remove.
    Ultraviolet—Coatings with ultraviolet visibility show up under a black light, so you can easily check if you’ve applied them evenly.
    IPC-CC-830—Coatings that meet IPC-CC-830 are certified for use on circuit boards.
    UL 94 V-0—Coatings that meet UL 94 V-0 have passed a test for flame retardance.
    Cannot Be Sold To—Coatings that cannot be sold to the listed areas are restricted due to VOCs (volatile organic compounds) regulations.
    Dry Time
    Temperature,
    ° F
    Container
    Net Wt., oz.
    Touch,
    min.
    Overall,
    hr.
    Color
    Visibility
    Dielectric Strength,
    V/mil
    Min.
    Max.
    Specs.
    Met
    Flammability
    Rating
    For Use On
    Cannot Be Sold To
    Each
    Silicone Rubber—Hard
     
    Aerosol Can
    126072ClearUltraviolet1,100-85390IPC-CC-830UL 94 V-0
    		Aluminum, Brass, Bronze, Copper, Steel, Stainless SteelOutside United States and Canada6801A37000000
     

    No-Residue Mold-Release Lubricants

    Image of Product. Front orientation. Mold-Release Lubricants. No-Residue Mold-Release Lubricants, Aerosol Can.

    Aerosol

    Can

    Also known as paintable mold-release lubricants, these lubricants don’t leave a residue, so you can paint or finish the molded part without the need to clean it. Apply them to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing.
    Silicone Rubber Additive—Lubricants with silicone rubber have a small amount of silicone for lubricity, but still allow you to paint molded parts without cleaning first. Use these lubricants to release large, intricate, or difficult-to-release parts.
    Container
    Temperature,
    ° F
    Each
    Package
    Net Weight,
    oz.
    Type
    Additive
    Min.
    Max.
    For Use
    With
    Each
    Pkg.
    Qty.
    Pkg.
    Sprayon MR 309 Paintable Release Agent
    12Aerosol CanSilicone Rubber
    		-40550Plastic1409K33000000121409K3310000000
     

    Silicone, Caulk, and Foam Sealant Removers

    Image of Product. Spray Bottle. Front orientation. Sealant Removers. Silicone, Caulk, and Foam Sealant Removers.

    Spray

    Bottle

    Remove silicone, foam sealants, caulk, wet or dry latex-based foams, and construction adhesives. Safe for use on plastics, fiberglass, and most metals.
    Cannot Be Sold to Canada—These removers cannot be sold to Canada due to local chemical regulations.
    Container
    Type
    Size, fl.
    oz.
    Solution
    Type
    Harshness
    For Use On
    Cannot Be
    Sold To
    Each
    Liquids
    Spray Bottle16Water BasedModerateAluminum, Ceramic, Chrome, Fiberglass, Galvanized Steel, Iron, Plastic, Porcelain, Stainless Steel, Steel, Stone, Vinyl Plastic, WoodCanada8460T9000000
     

    High-Temperature Conformal Coatings

    Image of Product. Front orientation. Conformal Coatings. High-Temperature Conformal Coatings.
    Even in furnace-like heat, these coatings protect your electronics from moisture, dust, and static. They withstand temperatures up to 270° higher than standard silicone rubber coatings while remaining flexible enough to not crack and peel from vibration. Whether your circuit board is in a hot, humid shop or inside heavy machinery that heats up and vibrates, these coatings keep it protected. Made of silicone, they won’t cloud from humidity.
    They’re thinner than potting compounds, so they flow into the smallest contours of your components to cover them completely. Simply spray these coatings on your device without needing a potting box or other container. They contain a UV indicator, so you can use a blacklight to check if they’ve been applied evenly. You can remove these coatings if necessary.
    These coatings are IPC certified for use with circuit boards. For flame retardance, they meet UL 94 V-0.
    Cannot Be Sold To—They cannot be sold in California or outside North America due to regulatory limits on VOCs.
    Dry Time
    Container
    Net Wt., oz.
    Touch,
    min.
    Overall,
    hr.
    Mixing
    Req.
    Dielectric Strength,
    V/mil
    Temp. Range,
    ° F
    Specs.
    Met
    Flammability
    Rating
    For Use
    Outdoors
    For Use On
    Color
    Visibility
    Cannot Be Sold To
    Each
    Silicone Rubber—Extra Hard
     
    Aerosol Can
    124524No560-40 to 660IPC-CC-830UL 94 V-0
    		NoAluminum, Copper, FiberglassClearUltravioletCalifornia, Outside North America6138N11000000
     

    Mold-Release Lubricants

    Image of Product. Front orientation. Mold-Release Lubricants. Mold-Release Lubricants, Spray Bottle.

    Spray

    Bottle

    Apply these lubricants to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing. They leave a residue, so they shouldn’t be used on parts that need to be painted.
    Silicone Rubber Additive—Lubricants with silicone rubber can be used with rubber and plastic.
    Container
    Temperature,
    ° F
    Each
    Package
    Size, fl.
    oz.
    Type
    Additive
    Min.
    Max.
    For Use With
    Each
    Pkg.
    Qty.
    Pkg.
    Mold-Release Lubricant
    16Spray BottleSilicone Rubber
    		35500Plastic, Rubber2343K37000000122343K3710000000
     

    Oil-Resistant Protective Coatings

    Spray these coatings on glass to create a clear, scratch-resistant surface that repels oil and water. They’re also known as oleophobic and hydrophobic coatings. Good for use on machine windows to repel coolant for a clear view, they can also be used on exterior windows to help keep them clean. Coatings are made from nanoparticles of fumed silica, also known as quartz, suspended in a solvent. Spray them onto glass, fiberglass, and ceramic surfaces and spread with a cloth. Allow to dry overnight and buff for a thin, glass-like finish that protects against chemicals, such as acids, alkalies, coolant, fuel, and solvents.
    Fumed Silica—Spray Bottle
    Image of Product. Front orientation. Protective Coatings. Oil-Resistant Protective Coatings.
    Dry Time
    Container
    Size, fl. oz.
    Solution
    Type
    Touch,
    min.
    Overall,
    hr.
    Approx. Coverage
    @ Thk.
    Mixing
    Req.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    For Use
    Outdoors
    For Use On
    Color
    Each
    3.4Solvent Based1012215 ft² @ 0.004 milNo48040 to 75YesFiberglass, Ceramic, GlassClear2615N1000000
     

    Protective Coatings for Grout

    Spray these coatings on grout to form a barrier against dirt, water, mildew, and discoloration.
    Silicone Rubber—Spray Bottle
    Image of Product. Front orientation. Protective Coatings. Protective Coatings for Grout.
    Dry
    Time, hr.
    Container
    Size, fl. oz.
    Solution
    Type
    Touch
    Overall
    Approx. Coverage,
    ft²
    Mixing
    Req.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    For Use
    Outdoors
    For Use
    On
    Includes
    Color
    Each
    22Water Based224200No8050 to 80NoGroutTrigger SprayerFlat Clear7219T22000000
     

    Paint and Coating Removers

    Strip paint, varnish, and epoxy, penetrating several layers at once.
    Aerosol Cans
    Image of Product. Front orientation. Paint and Coating Removers. Aerosol Cans.
    Cannot Be Sold To—Removers that cannot be sold to the listed regions are restricted by product labeling requirements and/or import regulations.
    Each
    Package
    Container
    Net Wt., oz.
    Solution
    Type
    Approx. Coverage,
    ft²
    For Removing
    Cannot Be
    Sold To
    Each
    Pkg.
    Qty.
    Pkg.
    15Solvent Based20Acrylic Plastic, Alkyd, Ceramic, Cosmoline, Epoxy, Lacquer, Plastic, Polyurea, Polyurethane Rubber, Rubber, Shellac, Silicone Rubber, Urethane RubberCanada7764T21000000127764T2130000000
     
    back to top