We will reply to your message within an hour.
More
Demolish material, form metal, and drive punches, chisels, and masonry drills.
Swing these long, heavy hammers with both hands to demolish material, form metal, and drive punches, chisels, and masonry drills. Mix faces of different materials or hardnesses to create the perfect striking tool.
These hammers have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. A fluorescent orange color makes them easy to see. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills.
Change out the faces when they become worn. The head on these hammers is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills.
The faces and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking and are nonmagnetic and corrosion resistant. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills.
A fluorescent orange color makes these mallets easy to see. The head is loaded with metal shot for added weight and a controlled impact with minimal rebound. All are suitable for driving chisels and striking work without damaging its surface.
The head on these mallets is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface.
Change the faces out when worn rather than replacing the entire tool. A fluorescent orange color makes these mallets easy to see. All have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface.
The replaceable faces can be changed out when worn. These mallets have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface.
Strike metal, concrete, and stone with the flat end of these hammers; the wedge-shaped end is for bending and shaping metal. They're also known as cross-peen hammers.
The faces and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking and are nonmagnetic and corrosion resistant. Use the flat end of the head to strike metal, concrete, and stone; the wedge-shaped end is for shaping and bending metal.
These hammers have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels.
Drive nails with the flat, steel face and remove them with the claw on the other end of the head.
Strike work in tight spaces where standard hammers don't have room to swing. The steel face on these hammers is hard enough to demolish material and drive pins, punches, and masonry drills.
These faces have screw threads to attach to the head of your hammer or mallet. Replace existing faces or switch to a face with a different hardness.
Replace faces on a compatible hammer or mallet head or switch to a face with a different hardness.